StarTech.com 102B-USBC-MULTIPORT Manual

StarTech.com Andet computertilbehør 102B-USBC-MULTIPORT

Læs gratis den danske manual til StarTech.com 102B-USBC-MULTIPORT (2 sider) i kategorien Andet computertilbehør. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om StarTech.com 102B-USBC-MULTIPORT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 2, 2022 10:55 AM

Product ID

102B-USBC-MULTIPORT

Product Diagram (Side A)

(Side B)

(Side C)

Component Function

1Built-in USB-C Host Cable

• Connect to a USB-C Port on a Host Laptop

• USB 3.2 Gen 2 (10Gbps)

• Power Delivery 3.0 Specication

2USB-C Data Port • Connect a USB-C peripheral

• USB 3.2 Gen 2 (10Gbps)

Requirements

For the latest requirements, please visit www.StarTech.com/102B-USBC-MULTIPORT

USB-C DP 1.4 Multiport Adapter - Dual HDMI 4K 60Hz - USB-C and USB-A, GbE, SD 4.0 (UHS-II) - 100W PD

3USB-A Data/Charge Port

• Connect and/or charge a USB-A peripheral

• USB 3.2 Gen 2 (10Gbps)

• Supports BC1.2 5V/1.5A (7.5W)

• USB-C Power Adapter required for

charging

4SD Card Reader

• Secure Digital (SD) 4.0 UHS-II, SD 3.0, 2.0,

1.1, and 1.0 compatibility

• Push an SD Card, label side up, into the SD

• Card Slot

• Note: The Host Computer’s Operating

System (OS) will automatically detect the

SD Card and install the required driver

software

• Pull the SD Card to remove

52 x HDMI Output Ports

• Connect to HDMI Display Devices

• HDMI 2.0

• Up to 4K (4096x2160) 60Hz

6Gb Ethernet Port

• Connect a CAT 5e/CAT 6 cable to establish

a network connection

• 10/100/1000Mbps

7USB-C 100W Power

Delivery Port

• Connect a USB-C power adapter

• USB Power Delivery 3.0 (up to 100W, with

up to 85W available for charging)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a 3-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Installation

Side A Ports

1. If you have a Windows computer with Internet access, connect the Built-in USB-C

Host Cable on the Multiport Adapter to a USB-C port on your host laptop. Your

computer will automatically detect the device and install all the required drivers.

If you’re running a non-Windows operating system or the drivers do not

automatically install, disconnect the device from your computer, then:

a. Navigate to and click the www.StarTech.com/102B-USBC-MULTIPORT Drivers/

Downloads tab.

b. Under , download the Driver Package for your operating system, and Driver(s)

follow the steps outlined in the Installation guide, that’s included in the Driver

Package.

2. When connecting USB peripheral devices, connect a USB-C cable from your USB

peripheral device to the .USB-C Data Port on the Multiport Adapter

Note: The USB port will output whatever bus power is available, up to 4.5W.

3. Connect a USB-A cable from your USB peripheral device to the USB-A Data/

Charge Port on the Multiport Adapter, to connect the device to your computer,

and/or charge your device with up to 5V/1.5A (7.5W).

Notes:

• A USB-C power adapter must be connected to the USB-C DATA/ 100W Power

Delivery Port on the Multiport adapter, in order to charge connected peripheral

devices.

• Without a power adapter connected, the USB port will output whatever bus

power is available, up to 4.5W.

4. Insert your memory card into the SD Card Reader, and press the card to lock it

into place. Your computer will recognize the card and mount it as a drive on your

connected host computer. To remove the memory card, push the card in and

then pull the memory card out.

Note: To protect your memory card and the data stored on it, it’s important to

safely unmount (eject) the card within your computer’s operating system, before

physically removing the card from the Multiport Adapter.

Side B Ports

5. Connect an HDMI cable from up to two HDMI enabled display devices, to the

HDMI Output Ports on the Multiport Adapter, to add additional HDMI displays to

your workstation.

6. Connect a CAT 5e/CAT 6 cable from your local area network (e.g. Router, Switch,

Modem, etc.) to the on the Multiport Adapter, to access your Gb Ethernet Port

network via a wired LAN connection.

Side C Ports

7. Connect a USB-C power adapter (up to 100W) from an AC outlet to the USB-C

100W Power Delivery Port on the Multiport Adapter, to charge the laptop that’s

connected to .Built-in USB-C Host Cable

Note: The Multiport Adapter reserves of power, with up to W available 15W 85

for charging your laptop.

Installation Cont’d

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Andet computertilbehør
Model:	102B-USBC-MULTIPORT

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 102B-USBC-MULTIPORT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Andet computertilbehør StarTech.com Manualer

StarTech.com DK31C3HDPD Manual

28 December 2024

StarTech.com DK30A2DHUUE Manual

28 December 2024

StarTech.com CDP2HVGUASPD Manual

28 December 2024

StarTech.com 129UE-USBC-KVM-DOCK Manual

7 December 2024

StarTech.com DK30CHHPD Manual

7 December 2024

StarTech.com 155NA-USB4-DOCK Manual

11 September 2024

StarTech.com 155UE-USB4-DOCK Manual

11 September 2024

StarTech.com ST7300USBME Manual

4 September 2024

StarTech.com 101N-USBC-DOCK Manual

4 September 2024

StarTech.com USB31C2SAT3 Manual

4 September 2024

Andet computertilbehør Manualer

Nyeste Andet computertilbehør Manualer

Kensington SD5780T Manual

3 April 2025

WyreStorm USB-HUB4 Manual

3 April 2025

ATen UH3240 Manual

1 April 2025

Rocstor Y10P003-B1 Manual

12 Marts 2025

20 Februar 2025

20 Februar 2025

20 Februar 2025

20 Februar 2025

20 Februar 2025

PureLink VL-SD200 Manual

12 Februar 2025