StarTech.com CRJ4550PK Manual

StarTech.com Kabler til pc'er og periferiudstyr CRJ4550PK

Læs gratis den danske manual til StarTech.com CRJ4550PK (2 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om StarTech.com CRJ4550PK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: January 25, 2019 12:48 PM

Product Diagram (CRJ4550PK)

Connector Function

1Pins x 8

• Used to connect the eight wires within the

Ethernet cable to the .Modular Connector

Requirements

• Unshielded Twisted Pair Patch Cable (UTC) x 1

• Modular Connectors x 2

• Crimping Tool x 1

• Cable Tester x 1

• Wire Cutter x 1

Installation

Notes: Wire Cutter’s are very sharp and should be used with extreme care.

Wiring should be completed by a certied professional as per the local safety and

building code guidelines.

1. Carefully using a strip the jacket o of the 1.5” from the end Wire Cutter UTC Cable,

of the cable exposing the four pairs of twisted wires.

2. Spread the four pairs of twisted wires apart.

Note: CAT5e cables have a pull sting that will need to be removed.

CAT6 Cables have a spine that will need to be removed.

3. Untwist the four pairs of wires, creating eight separate wires.

Cat5e RJ45 Modular Plug Connector - 50 Pkg

4. Arrange the eight wires using either the T568A or T568B pattern. See Wire

Orientation for more information.

5. Using the , cut the eight wires 0.5” from the end of the wires, leaving a Wire Cutters

clean straight cut at the end of the wires.

6. Carefully insert the wires in the . Ensure that each of the wires Modular Connector

passes through the guides that are inside of the .Modular Connector

7. Push the into the slot in the and squeeze down Modular Connector Crimping Tool

on the handle to secure the wires in the .Modular Connector

8. Repeat steps 1 - 7 on the other end of the .UTC Cable

9. Using the on both ends of the to test each of the pins in the Cable Tester UTC Cable

Modular Connector.

Wire Orientation

T568A Standard:

Note: Start from the left of the and work towards the right (Pin Modular Connector

1 - 8).

Pin Wire

Pin 1 • White/Green

Pin 2 • Green

Pin 3 • White/Orange

Pin 4 • Blue

Pin 5 • White/Blue

Pin 6 • Orange

Pin 7 • White/Brown

Pin 8 • Brown

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Kabler til pc'er og periferiudstyr
Model:	CRJ4550PK
Dybde:	21 mm
Vægt:	50.5 g
Antal pr. pakke:	50 stk
Pakkevægt:	85 g
Pakkedybde:	225 mm
Pakkebredde:	125 mm
Pakkehøjde:	25 mm
Certificering:	RoHS