StarTech.com MDP2HDMIUSBA Manual

StarTech.com Kabler til pc'er og periferiudstyr MDP2HDMIUSBA

Læs gratis den danske manual til StarTech.com MDP2HDMIUSBA (2 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om StarTech.com MDP2HDMIUSBA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

I T: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

P T: Guia do usuário - pt.startech.com

Manual Revision: 03/28/2019

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x MDP2HDMIUSBA adapter

Installation

1. Make sure the computer system and display device are

turned o.

2. Connect the mini DisplayPort® connector into the host

computer system’s video card.

3. Connect the USB connector on the adapter into an

available USB port on the host computer system.

4. Connect a standard male/male HDMI® cable (not included)

from the adapter to an available HDMI® connector on the

display device.

5. Power on the display device.

6. Power on the computer system. The Power LED on the

adapter should light up.

7. The computer system should automatically detect the display

device. Driver installation or special setup requirements

depend on the connected display device. Consult any

documentation included with your display device.

8. The operating system should also automatically detect and

install a new audio output device.

9. If you wish to send audio over HDMI®, check the audio

properties for the operating system, to make sure the USB

adapter is set as the default audio device.

NOTE: This will disable audio output from any speakers/

headphones currently connected to the computer system.

10. If you do not wish to use audio over HDMI®, set the default

audio device back to the original audio output device (e.g.

sound card) for your system.

System Requirements

• DisplayPort® enabled computer system with available mini

DisplayPort® port

• USB enabled computer system with available port

• HDMI® enabled display device

MDP2HDMIUSBA

Mini DisplayPort® to HDMI® Adapter with USB Audio

*actual product may vary from photos

Mini

DisplayPort®

connector

USB connector

HDMI®

connector

(output)

Power LED

Specications

Bus Interface

Mini DisplayPort® 1.1a

USB 2.0

Video Signal High speed HDMI®

Connectors

1 x Mini DisplayPort® male

1 x USB type A male

1 x HDMI® female

LEDs 1 x Power

Integrated Cable Length 60cm / 2ft

Maximum Video Resolution 1920x1200 / 1080p

Audio Support Yes - 2 channel LPCM

HDCP Support Yes

Operating Temperature 5°C ~ 35°C (41°F ~ 35°F)

Storage Temperature 0°C ~ 70°C (32°F ~ 158°F)

Humidity

0 ~ 80% RH

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Kabler til pc'er og periferiudstyr
Model:	MDP2HDMIUSBA
Bredde:	56 mm
Dybde:	762 mm
Højde:	10 mm
Vægt:	90 g
Antal pr. pakke:	1 stk
Produktfarve:	Hvid
Pakkevægt:	90.5 g
Pakkedybde:	188 mm
Pakkebredde:	15 mm
Pakkehøjde:	213 mm
Understøttede videotilstande:	1080p
Opbevaringstemperatur (T-T):	0 - 70 °C
Relativ luftfugtighed ved drift (H-H):	0 - 80 %
Driftstemperatur (T-T):	5 - 35 °C
Maksimal opløsning:	1920 x 1200 pixel
Husmateriale:	Plast
Materiale:	Plast
Strømkilde:	USB
Certificering:	CE, FCC, REACH
Kabellængde:	0.68 m
Harmoniseret systemkode (HS):	84733080
Bæredygtighedscertifikater:	RoHS
Plug and play:	Ja
HDMI-version:	1.3b
DisplayPort-version:	1.1a
Pakkelængde:	188.00 mm
Stik 1:	HDMI, USB A
Stik 2:	Mini DisplayPort
Stik 1 køn:	Hunstik
Stik 2 køn:	Hanstik
Stik 1 formfaktor:	Lige
Stik 2 formfaktor:	Lige
Konverter type:	Passiv videoomformer