Streacom ZF240 Manual

Streacom Computer adapter ZF240

Læs gratis den danske manual til Streacom ZF240 (2 sider) i kategorien Computer adapter. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Streacom ZF240, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ZF240 Overview

The ZF240 has been specially designed to fit inside Streacom cases and utilize the heatsink of

the case in order to eliminate the need for fans and provide a totally silent solution.

Unlike traditional ATX PSU’s, the AC input socket is on a flexible cable and must be secured to

the back socket of the case. This allows the PSU more freedom when positioning it and

allows us to design cases that break the standard PC case mold.

The heatsink connector and various holes (marked in red) on both of its sides in order to

mount to different cases in different orientations, but should always be mounted to the case

heatsink.

Remove the screws and nuts from the IEC Socket

Prepare the ZF240 for installation to the case by removing the 2 screws and nuts pre-installed

in the IEC socket. This will allow you to fit the socket to the case back panel

Prepare the case for installation

All compatible cases have a DC Jack Mounting Plate installed over the IEC socket in order to

allow for the NanoPSU jack. When using the ZF240, this plate will need to be removed in

order to fit the IEC Socket. This is done by removing the 2 screws which secure the plate to

the back panel.

A Message from the Streacom Team

Thank you for choosing Streacom! In a market dominated by generic and uninspired products, we

are on a mission to break the mold, not only of design, but materials and finish. This is a value that

is not easily conveyed in an industry preoccupied with specs and numbers, so your choice shows an

appreciation and understanding of what makes our products different, and we sincerely thank you

for that.

Every care has been taken to ensure that this product meets the highest quality and standards we

have defined. If anything about this product falls short of your expectations or you have any

questions that are not covered in this user guide, please contact us online at

www.streacom.com/contact. We respond to every question received and your feedback is a

critical part of our ongoing product development and refinement.

From everyone at Streacom, we hope that you enjoy using our product!

Specification

Power Output

Input Voltage Range

Output Connectors

Input Connector

Input Cable Length

Output Cable Length

Dimensions

Compatible Cases

Net Weight

240W Total Combined Power:

3.3V @ 10A, 5V @ 10A, 5VSB @ 2A, 12V @14A, -12V @ 0.3A

100-240V AC 50/60Hz

1 x 20+4 ATX, 1 x 4PIN CPU, 2 x SATA, 2 x MOLEX, 1 x FDD

IEC C14 Socket

150mm

400mm

139 x 86 x 47mm (LxWxH)

FC5 Evo* & FC5 Alpha*, FC9** & FC9 Alpha**,

FC10* & FC10 Alpha*

848g

IEC C14 Socket

1 x Berg (Floppy) Connector

Aluminium

PSU Enclosure

2 x 4PIN Molex Connector

2 x SATA Connector

1 x 4PIN ATX Connector

Heatsink Connector

1 x 20+4PIN

ATX Connector

*Micro-ATX Only

** Mini-ITX Only

CS-M3x8

DC Jack Mounting Plate

CS-M3x4

Fitting the IEC Socket (Newer Generation Cases)

With the DC Jack Mounting Plate removed, fit the IEC socket through the opening from

the inside of the case, then secure it to the back panel using the screws and nuts

originally fitted to the IEC socket. Note that the screws fit from the OUTSIDE of the

case and the nuts fit in the IEC socket.

Fitting the IEC Socket (Older Generation Cases)

With the DC Jack Mounting Plate removed, fit the IEC socket to the back panel from the

inside of the case and secure it from the inside using the original screws holding the DC Jack

Mounting Plate in place. Note that the screws fit from the INSIDE of the case and the socket

does NOT fit through the opening but instead sits flat against the inside of the back panel.

Fit the ZF240 to the case heatsink

The ZF240 secures to the case using the 3 hex screws supplied and fixes directly to the

heatsink. Place the ZF240 against the side of the case and adjust the position until the holes in

the heatsink connector align with the holes in the case heatsink. Note that thermal paste is

NOT required when fitting the ZF240.

Connect all the cables

With the ZF240 and all other components fitted, connect the motherboard and peripheral

hardware to the PSU. Finally, connect the mains cable to the IEC socket and power up your

system.

Important Notice

IMPORTANT NOTICE

Passively cooled products can get hot to the touch, especially when systems are running at high loads for

extended periods. This is a normal part of their operation and they have been tested to run safely under

these conditions. Please take their operational temperature into consideration when positioning and handling.

a retrieval system, or transmitted, in any form or in any means – by electronic, mechanical, photocopying,

recording or otherwise – without prior written permission. All trademarks and registered trademarks in this

publication are the property of their respective owners. Streacom is a registered trademark.

HC-M3x8

Produkt Specifikationer

Mærke:	Streacom
Kategori:	Computer adapter
Model:	ZF240

Har du brug for hjælp?

Hvis du har brug for hjælp til Streacom ZF240 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Computer adapter Streacom Manualer

Streacom ZF240 Manual

24 Juni 2025

Computer adapter Manualer

Nyeste Computer adapter Manualer

Volcano HEX 850W GOLD Manual

12 August 2025

Asus TUF-Gaming-550B Manual

11 August 2025

Cooler Master GX III Gold 650 Manual

5 August 2025

Cooler Master GX III Gold 850 Manual

4 August 2025

Cooler Master GX III Gold 750 Manual

4 August 2025

Gigabyte GP-UD850GM PG5 Manual

3 August 2025

Gigabyte AORUS P1200W Manual

3 August 2025

Gigabyte UD750GM Manual

3 August 2025

Thermaltake Smart BM3 Manual

1 August 2025

Thermaltake Smart BX3 Bronze Manual

1 August 2025