Sun Joe AJP100E-RM Manual

Sun Joe Polermaskine AJP100E-RM

Læs gratis den danske manual til Sun Joe AJP100E-RM (16 sider) i kategorien Polermaskine. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Sun Joe AJP100E-RM, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model AJP100E-RM Form No. SJ-AJP100E-RM-880E-M-V1
RRANDOM ORBIT BUFFER + POLISHER
ELECTRIC | 0.7 AMP | 6" | 3800 OPM
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model AJP100E-RM Form No. SJ-AJP100E-RM-880E-M-V1
RRANDOM ORBIT BUFFER + POLISHER
ELECTRIC | 0.7 AMP | 6" | 3800 OPM
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
m WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a Ground Fault Circuit Interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use safety equipment. Always wear eye protection
– Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source,
picking up or carrying the tool. – Carrying power tools
with your nger on the switch or energizing power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Polermaskine
Model: AJP100E-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe AJP100E-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig


Polermaskine Sun Joe Manualer

Sun Joe

Sun Joe AJP100E-RM Manual

16 August 2024
Sun Joe

Sun Joe AJP100E Manual

19 Oktober 2022

Polermaskine Manualer

Nyeste Polermaskine Manualer

Hilti

Hilti DGH 130-22 Manual

31 August 2025
Blaupunkt

Blaupunkt OS6010 Manual

28 August 2025
Black Decker

Black Decker G650 Manual

22 August 2025
Worx

Worx WX856 Manual

21 August 2025
Milwaukee

Milwaukee 5460 Manual

13 August 2025
Milwaukee

Milwaukee AGS 15-125 C Manual

8 August 2025
Fein

Fein WPO 15-25 E Manual

7 August 2025
Fein

Fein WPO 10-25 E Manual

7 August 2025
Bosch

Bosch GPO 14 E Professional Manual

6 August 2025
Eibenstock

Eibenstock ESM 1311 Set Manual

30 Juli 2025