Sun Joe BDL-A0200 Manual

Sun Joe Hæftemaskine BDL-A0200

Læs gratis den danske manual til Sun Joe BDL-A0200 (20 sider) i kategorien Hæftemaskine. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Sun Joe BDL-A0200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

®, LLC

A Division of Snow Joe

®, LLC Model 24V-X2-TLR14 Form No. SJ-24V-X2-TLR14-880E-MR1

OPERATOR’S MANUAL

CORDLESS TILLER + CULTIVATOR

48V MAX* | 2.0 Ah | 14-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

Before using this cordless tool, carefully read and observe the

safety rules and instructions listed below. Before starting work,

make sure that you know how to stop the machine in case of

an emergency. The incorrect use of this machine could cause

serious injury. Keep these instructions in a safe place and on

hand so that they can be consulted when required.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

parts immediately.

3. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

5. Use the right tool – Do not use this machine for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

7. Avoid accidental starting – Do not carry the garden tiller

+ cultivator with your nger on the switch.

mCAUTION! Moving parts will continue to run for several

seconds after turning o the machine.

8. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

9. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

10. Do not overreach – Keep proper footing and balance at

all times.

If the tiller + cultivator strikes a foreign object, follow these

steps:

• Stop the cordless tiller + cultivator.

• Inspect for damage.

• Repair any damage before restarting and

operating the tool.

11. Use safety glasses – Also use safety footwear,

snug-tting clothing, protective gloves, hearing, and

head protection.

12. Remove the batteries – Remove the batteries from the

tiller + cultivator when it is not in use, before servicing it,

when changing accessories, and when performing any

other maintenance task.

13. Store idle tool indoors – When not in use, the tiller +

cultivator should be stored indoors in a dry and high or

locked-up place out of the reach of children.

14. Maintain the tiller + cultivator with care – Keep the

cutting edges sharp and clean for optimal performance

and to reduce the risk of injury. Keep the handles dry,

clean, and free from oil and grease. Follow the additional

recommendations described in the maintenance section

of this manual.

15. Avoid dangerous environments – Do not use the tiller

+ cultivator in rain or in damp or wet locations. Do not

operate the tiller + cultivator in gaseous or explosive

atmospheres or use the tiller + cultivator near ammable

or combustible liquids. Motors in these tools normally

spark, and the sparks might ignite fumes.

16. Stay alert – Watch what you are doing. Use common

sense. Do not operate the tiller + cultivator when you

are tired or under the inuence of drugs, alcohol, or

other medication.

17. Check for damaged parts – Before further use of the

appliance, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may aect its

operation. A guard or other part that is damaged should

be properly repaired or replaced. Contact the Snow Joe®

+ Sun Joe® customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

Training

• Read, understand, and follow all instructions on the tiller

+ cultivator and in the manual before operating this unit.

Thoroughly familiarize yourself with the controls and the

proper use of the equipment. Know how to stop the unit

and disengage the controls quickly.

• Children should never be allowed access to the equipment.

Adults should never operate the equipment without

carefully reading and understanding these instructions.

• Keep the area of operation clear of all persons, particularly

small children or pets.

• Exercise caution to avoid slipping or falling.

• Always plan your cultivating path to avoid discharge of

material toward people, pets, and property (e.g. windows,

cars, etc.). Thrown objects can cause serious personal

injury and property damage. Do not allow anyone in front of

a running machine.

• Keep people, pets, and property at least 25 feet from the

tiller + cultivator while it is in operation. Stop the tiller +

cultivator if people or pets enter the discharge area.

• Always observe the surface conditions in order to avoid

slipping, falling, and unexpected objects.

Preparation

• Always inspect the area where the tiller + cultivator is to

be used. Remove all objects (i.e. stones, sticks, wires, and

other foreign materials) that could be thrown by the blades

or cause the operator to trip.

• Thrown objects can cause serious injury to the eyes and

exposed body. Always wear safety glasses or eye shields

during operation and while making an adjustment or repair.

• Always operate the tiller + cultivator wearing adequate

garments. Do not wear jewelry or other loose clothing,

which could become entangled in moving parts. Wear

non-slip footwear to ensure proper footing.

• Observe any noise-prevention regulations and laws.

• Inspect the tiller + cultivator for worn, missing, or damaged

parts and safety labels. See maintenance section for

detailed instructions.

Operation

• Do not operate the machine while under the inuence of

alcohol or drugs.

• Keep all safety devices in place and in proper working

order. Do not operate with missing or damaged

components.

• Ensure the controls (start/stop) function properly

before cultivating.

• Hold onto the tiller + cultivator with both hands during

operation. Ensure the grips are dry.

• Contact with rotating parts can amputate hands and feet.

Keep hands and feet away from all rotating parts.

• Only operate the tiller + cultivator when there is good

visibility or light and dry conditions. Always watch your

footing and keep a rm hold on the grips. Walk; don't run!

• Do not operate the tiller + cultivator on slippery surfaces.

Check your footing during use.

• Exercise caution when changing direction and operating

the tool on slopes. Always keep feet and legs a safe

distance away from the machine. Look for hidden obstacles

or hazards.

• Do not overload machine capacity by attempting to

cultivate too deeply. It will cause excessive resistance.

• Stop the tiller + cultivator and remove the batteries before

leaving the operating position (behind the handles) to adjust

or inspect the unit. Wait until the blades have come to a

complete stop.

• If the tiller + cultivator should start to vibrate abnormally,

stop the machine and inspect thoroughly for damage.

• Turn the machine OFF when moving to a new work area.

Allow the blades to completely stop rotating before

transporting the unit.

• Always use proper care and good judgment when you

are confronted with a situation that is not covered in

this manual. If you are unsure of what to do, contact

your authorized Snow Joe® + Sun Joe® dealer or call

the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563).

• Do not use in rain or wet conditions.

• Do not grasp the exposed cutting blades or cutting edges

when picking up or holding the appliance.

Stopping Work

• Always turn the tiller + cultivator OFF and remove the

batteries when stopping work or when changing work

areas. Never leave the machine running when unattended.

• The blades will continue to rotate for a short period after

turning OFF the tiller + cultivator. Wait until the blades

have completely stopped before lifting the machine or

conducting inspection and maintenance.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Hæftemaskine
Model:	BDL-A0200

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe BDL-A0200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hæftemaskine Sun Joe Manualer

Sun Joe BDL-A0202 Manual

7 December 2024

Sun Joe BDL-A0200 Manual

7 December 2024

Sun Joe 24V-TLR-LTE-RED-RM Manual

10 August 2024

Sun Joe 24V-TLR-CT-SJG-RM Manual

10 August 2024

Sun Joe 24V-TLR-LTE-GRY-RM Manual

6 August 2024

Sun Joe 24V-TB-LTE-SJB-RM Manual

2 August 2024

Sun Joe TJ604E Manual

2 August 2024

Sun Joe 24V-TLR-CT-RM Manual

24 Juli 2024

Sun Joe 24V-TLR-LTE Manual

23 Juli 2024

Sun Joe 24V-TLR-LTE-SJG-RM Manual

21 Juli 2024

Hæftemaskine Manualer

Nyeste Hæftemaskine Manualer

Milwaukee M12 Fuel 2541-20 Manual

13 August 2025

Milwaukee M12 2448-20 Manual

13 August 2025

Milwaukee M12 2540-20 Manual

12 August 2025

Milwaukee M12 2458-20 Manual

12 August 2025

Makita MAC210Q Manual

11 August 2025

Black Decker BCN115 Manual

9 August 2025

DeWalt DCN660 Manual

9 August 2025

Ozito SNG-2050U Manual

9 August 2025

Hikoki N1804DB Manual

7 August 2025

Hikoki NV45AB3 Manual

4 August 2025