Sunnydaze Decor MCA-2471 Manual


Læs gratis den danske manual til Sunnydaze Decor MCA-2471 (3 sider) i kategorien Vandpumpe. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Sunnydaze Decor MCA-2471, eller vil du spørge andre brugere om produktet?

Side 1/3
03/2024MCLST272 Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
IMPORTANT NOTES:
The nylon strings in the fountain body cannot be replaced or repaired.
The water tubing is built into the fountain. Take care when handling the water tube;
detaching the water tube from the fountain will damage the unit and void the warranty.
Sponge-like polyurethane foam lters in the top and bottom of the fountain body help
control water ow and catch debris ― do not remove these lters.
Familiarize yourself with the flow control regulator on the front of the pump as it may
need to be adjusted to achieve optimal water flow.
RELAXING RAIN GALVANIZED STEEL
WATER FOUNTAIN
MCA-2471
Review all assembly and care information before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain.

 
Fountain Body 1
Basin 1
Electric Submersible Pump 1
AC Adapter 1
M8x35mm Bolt Set 4
CHOKING HAZARD This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING

Hex Key
03/2024MCLST272 Page 2 / 3
ASSEMBLY
1. Locate the light cable on the underside of the
fountain body and rmly attach it to the short cable
on the pump.
2. Firmly connect the pump to the water tube that is
built into the fountain body.
3. Run the pump power cord up through the hole in
the sidewall of the fountain body.
4. Fill the basin with enough clean water to keep the
pump fully submerged during operation.
5. Ensuring the pump remains upright and the water
tube does not become kinked, place the fountain
body onto the basin and secure using four bolt sets.
6. Firmly connect the AC adapter to the pump power
cord.
7. Plug the power cord directly into a properly
grounded GFCI outlet.
NOTE: When rst used, there may be air trapped in the pump.
It may take several minutes for trapped air to escape, allowing water to ow.
Care & Maintenance
IMPORTANT: Do not discard the sponge-like polyurethane
foam lters in the top and bottom of the fountain.
TIP: Check and adjust the water ow before
securing the fountain body to the basin.
Some splashing may occur; adjust the flow rate on the pump if the water rate is too high or low.
Some climates and weather conditions increase water evaporation, requiring water to be added more frequently.
During high temperatures, windy conditions and long-term exposure to direct sunlight, frequently check water levels to
ensure the pump remains submerged underwater. Never allow the pump to run dry as doing so will burn out the motor.
Only use water in this fountain. Distilled water helps prevent mineral buildup but is not required. Tap water is okay to
use, but avoid heavily chlorinated water as it may damage the pump and fountain finish.
Periodically change the water to help keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything abrasive to scrub the fountain.
DO NOT use a pressure washer to clean the fountain.


Produkt Specifikationer

Mærke: Sunnydaze Decor
Kategori: Vandpumpe
Model: MCA-2471

Har du brug for hjælp?

Hvis du har brug for hjælp til Sunnydaze Decor MCA-2471 stil et spørgsmål nedenfor, og andre brugere vil svare dig