Sunnydaze Decor QZC-359 Manual


Læs gratis den danske manual til Sunnydaze Decor QZC-359 (3 sider) i kategorien Vandpumpe. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Sunnydaze Decor QZC-359, eller vil du spørge andre brugere om produktet?

Side 1/3
CY23F0013 07/2023
REPEATING SQUARES CYLINDER FOUNTAIN
QZC-359
Carefully review all assembly and care information before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain.

Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
IMPORTANT NOTES:
The water tubing is built into the fountain topper. Take care
when handling the water tube; detaching the tube from the
topper will damage the fountain and void the warranty.
Familiarize yourself with the flow control valve on the pump,
maximum (+) and minimum (-). This may need to be adjusted
to achieve optimal water flow.
The light and light cable are rated for contact with water. Use
care when handling the light, jarring movements or dropping
the light may cause it to burn out prematurely.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
 
Topper 1
Top Rim 1
Liner 1
Fountain Body 1
Electric Submersible Pump 1
Light Splitter 1
AC Adapter 1
CY23F0013 07/2023 Page 2 / 3
1. Connect the light splitter to the short pump
cable.
2. Locate the light cable inside the fountain
body and securely connect it to the light
splitter.
3. Run the long pump power cable through
the inside of the fountain body, and through
the hole in the bottom of the fountain body.
4. Place the pump inside the liner and set the
liner inside the fountain body.
5. Place the top rim onto the fountain body.
6. Locate the light cables on the underside of
the topper and rmly connect them to the
light splitter.
7. Firmly connect the pump to the water tube
on the topper; the connection will be tight.
8. Place the topper on the liner.
9. Fill the liner with enough water to keep the
pump fully submerged during operation.
10. Connect the adapter to the long pump
cable.
11. Plug the adapter into a properly grounded
GFCI outlet.
NOTE: When rst used, there may be air trapped inside the pump. It may take several minutes for trapped air to escape,
allowing water to ow. Refer to page 3 for more troubleshooting tips.
ASSEMBLY
IMPORTANT:
To prevent damaged to the power and light cables, ensure
they are installed between the wire coils within the fountain
body. Do not allow cords to become pinched by the fountain
liner or the top rim, pinched cords can permanently damage
the electrical components.


Produkt Specifikationer

Mærke: Sunnydaze Decor
Kategori: Vandpumpe
Model: QZC-359

Har du brug for hjælp?

Hvis du har brug for hjælp til Sunnydaze Decor QZC-359 stil et spørgsmål nedenfor, og andre brugere vil svare dig