Supermicro SBA-7142G-T4 Manual

Supermicro Server SBA-7142G-T4

Læs gratis den danske manual til Supermicro SBA-7142G-T4 (80 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Supermicro SBA-7142G-T4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/80
SBA-7142G-T4
Blade Module
User’s Manual
Revison 1.0d
SBA-7142G-T4 Blade Module User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software and documentation, is the
property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction
of this product is not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY
EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.
Manual Revison 1.0d
Release Date: April 3, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Produkt Specifikationer

Mærke: Supermicro
Kategori: Server
Model: SBA-7142G-T4

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro SBA-7142G-T4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Server Supermicro Manualer

Supermicro

Supermicro SuperServer 6028TR-DTR Manual

7 September 2025
Supermicro

Supermicro SuperServer SYS-620BT-DNTR Manual

28 August 2025
Supermicro

Supermicro SuperServer 2029U-E1CR4 Manual

28 August 2025
Supermicro

Supermicro Blade SBI-411E-1G Manual

28 August 2025
Supermicro

Supermicro SuperServer AS-1114S-WN10RT Manual

28 August 2025
Supermicro

Supermicro SuperServer 1029U-TRT Manual

22 August 2025
Supermicro

Supermicro SuperServer AS -2024US-TNR Manual

21 August 2025
Supermicro

Supermicro SuperServer AS-2024US-TRT Manual

21 August 2025
Supermicro

Supermicro SuperServer SYS-221BT-HNC8R Manual

23 Juli 2025
Supermicro

Supermicro SuperServer 1019S-MC0T Manual

6 Juli 2025

Server Manualer

Nyeste Server Manualer

Ibm

Ibm eServer xSeries 346 Manual

13 September 2025
Ibm

Ibm BladeCenter HS23 Manual

13 September 2025
Ibm

Ibm eServer System x3850 X5 Manual

13 September 2025
Ibm

Ibm eServer xSeries 445 Manual

13 September 2025
Ibm

Ibm System x x3690 X5 Manual

13 September 2025
Ibm

Ibm eServer xSeries 206 Manual

13 September 2025
Ibm

Ibm xSeries 365 Manual

13 September 2025
Ibm

Ibm System x x3650 M3 Manual

13 September 2025
Ibm

Ibm System x3650 M3 Manual

13 September 2025
Ibm

Ibm System x x3950 X5 Manual

13 September 2025