Supermicro SuperServer SYS-510D-10C-FN6P Manual

Supermicro Ikke kategoriseret SuperServer SYS-510D-10C-FN6P

Læs gratis den danske manual til Supermicro SuperServer SYS-510D-10C-FN6P (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Supermicro SuperServer SYS-510D-10C-FN6P, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
SuperServer 510D-(4C/8C/10C)-FN6P Quick Reference Guide
http://www.supermicro.com MNL-2530-QRG Rev. 1.0
Feature
Information
LED
LAN2 LED
LAN1 LED
HDD LED
Power LED
Reset Button
Power Button
Description
Alerts operator to several states
Indicates network activity on GLAN2 when flashing.
Indicates network activity on GLAN1 when flashing.
Indicates activity on the storage drives when flashing.
Steady on – Power on
Blinking at 4Hz – Checking BIOS/BMC integrity
Blinking at 4Hz and "i" LED is blue – BIOS firmware
updating
Two blinks at 4Hz, one pause 2hz and "i" LED blue –
BMC firmware updating
Blinking at 1Hz and "i" LED red – Fault detected
The reset button is used to reboot the system. Press
the button with a slender device such the tip of a pen.
The main power button is used to apply or remove power
from the power supply tothe server. Turning off system
power with this button removes the main power but
maintains system power. To perform maintenance tasks,
you must also unplug the system before servicing.
Informational LED
Color, Status Description
Red, solid An overheat condition has occurred.
Red, blinking at 1Hz Fan failure, check for an inoperative fan.
Red, blinking at 0.25Hz Power failure, check for a non-operational power supply.
Red, solid, with Power LED
blinking green Fault detected
Blue and red, blinking at 10 Hz Recovery mode
Blue, solid UID has been activated locally to locate the server in a
rack environment.
Blue, blinking at 1Hz UID has been activated using the BMC to locate the
server in a rack environment.
Blue, blinking at 4Hz The node remote UID is on.
Blue, blinking at 10Hz with
Power LED blinking green BMC/BIOS firmware is updating
Blue, blinking at 2Hz The node is powered down.
CautionRear I/O Ports
Control Panel Features
WARNING:
Always be sure all power supplies for this system have the same power
output. If mixed power supplies are installed, the system will not operate.
For more information go to : http://www.supermicro.com/support
SAFETY INFORMATION
IMPORTANT: See installation instructions and safety warning before
connecting system to power supply.
http://www.supermicro.com/about/policies/safety_information.cfm
!
WARNING:
To reduce risk of electric shock/damage to equipment, disconnect power
from server by disconnecting all power cords from electrical outlets.
If any CPU socket empty, install protective plastic CPU cap
!
!
Front View
Pro orcess
Support
S Int X s c s a tupports an el eon D-1700 serie pro es or with hermal
design power up 80 (TDP) of to W
Memory
Dr vei rtSuppo
Up 256 CC and Non- CC RD MM UD MM DDR4 memory to GB of E E I / I
wi speeds up 2933MHz our memor loth of to in f y s ts
Up four in ernal solid- di drive to S A3 2.5" AT t state sk s
Int M.2 s ts:ernal lo
One M.2 PCIe 3.0 p1-x4 or SATA 3.0 slot (M-Key 2280)
One M.2 PCIe 3.0 p1-x2 or SATA 3.0 or USB 3.0 Slot
(B-Key 2280/3042/3052)
One M.2 PCIe 3.0 p1-x1 or USB 2.0 slot (E-Key 2230)
Expansion
Slots
Net rkwo ing
One FHHL PCIe 4.0 p1-x16 slot
Two PCIe 3.0 p1-x4 SlimSAS connectors
Three internal fixed 40 x 28 mm fans
I/O Po rts
O cat B LAN tne dedi ed MC por
F G t t tsour igabi Etherne por
Two 25 28 por G SFP ts
System
C goolin
Power
Two por U 3.0 SB ts
O A tne VG por
Two onboard S A 3.0 c t (I-S A1, I-S A3)AT onnec ors AT AT
200 80 lu old power upplW AC P s G s y
Form act F or ( .2 x 1.7 x 9.8 WxHxD) 17 in
(437 43 249 mm) 1U hor -Dep Chassi x x S t th s
C ol Panelontr
Expans t sion Slo Lo ioncat
I m t PCIe 4.0)te Descrip ion (all
1x16 HH F L tslo
1
BMC AN L rtPo
UID Button
VGA Port
Two SFP28 Ports
Four GbE LAN Ports
USB 3.0 Ports
System Features: Front
Feature Description
Control Panel See the next page
LAN Ports One dedicated BMC LAN port, four
GbE LAN ports, two 25G SFP28 ports
USB Ports Two USB 3.0 ports
VGA Port Video port
UID Button Press the UID button to light up the
UID LED indicator.
Solid Blue The node local UID is on.
1Hz Blinking Blue The node remote UID is on.
No Illumination The node is powered down.
System Overview
Rear View
Board Layout
Power LED
HDD
ResetInformation
LED
Power
LAN2 LED
LAN1 LED
F ure t neat Descrip io
P S y C G s yower uppl 200W A old power uppl
Fan Int f sernal an
Fans Power Supply
# t n # t nDescrip io Descrip io
1
# t nDescrip io
IPMI LAN 6 RJ LAN345
2
11 UID Bu ontt
U 4 .0) 7 RJ LAN4SB (3 45
3 U 5 .0) 8 LAN5SB (3 SFP28
4 LAN1 9 LAN6RJ45 SFP28
5 LAN2 10 A P tRJ45 VG or
1
8
9
6
7
4
5
2
310 11
C or t nonnect Descrip io
BT tt1 O Banboard ery
COM1 COM rHeade
CPU F (FA : CPU F )/System an Headers N1 an
IPMI LAN
FA - FA , FAN FANBN1 N4 A,
Dedi ed orcat MI LAN PIP t
I-S A1 I-S A3AT and AT
S G P rerial Link eneral urpose I/O Heade
P LED (P s : P LED, P s : S )ower /Speaker in 1-3 ower in 4-7 peaker
F t t P rron Con rol anel Heade
Int P S A 3.0 P (I-S A1: S A DOM P )el CH AT orts AT AT ower
G P reneral urpose I/O Heade
M.2 PCIe 3.0 S A 3.0 S t Key )x4 or AT lo (M- 2280
4-pin BMC External I²C Header
Chas ru ion Headesis Int s r
LA ivi LED rN1 Act ty Heade
LA ivi LED rN2 Act ty Heade
LA /4 ivity LED rN3 Act Heade
I- 1SGPIO
JD1
JF1
JGP1
JIPMB1
JL1
JLA ED1NL
JLA ED2NL
JLA ED3NL
J 1MD
J 2MD
J 3 M.2 PCIe 3.0 U 2.0 S t (E-Key )MD x1 or SB lo 2230
M.2 PCIe 3.0 S A 3.0 U S t (B-Key / / )x2 or AT or SB 3.0 lo 2280 3042 3052
M.2 t sMoun ing Hole
JN , JN 2VI2C1 VI2C
J SRW1, J SRW1/2 MD1_ MD2_
J SRW1MD3_
JOPPS s v f O P se P Sec dRe er ed or ne ul er on
Non-Volatile Memory (NVMe) I²C Headers
JPH1
JPI2C1
JPWR1
4-pin HDD ower Connec P tor
Power System Management (SMB) I²C Header
JPV1
24-pin ATX ct P ower Conne or (Required )
JRK1
JSD1
JSDP1 - JSDP4
JSFPLED1
JSIM1
JSLI , JSLIM2M1
JSMB1
JSTBY1
JTPM1
JUIDB1
LA /2, LA /4N1 N3
LA /6N5
MH1 MH - 6
SL 6OT
SL 7OT
U 0/1, U 2/3SB SB
U 4/5SB
VGA
8-pin ower Connec or (Required CPU P t )
Int R D K rel AI ey Heade
S A DOM P orAT ower Connect
Re er ed or ime nchroni ios v f t sy zat n
LA /6 ivi LED rN5 Act ty heade
NANO M SSI lo or JMDt f 2
S PCIe 3.0 p1-x4 S tslimSAS lo
System Managemen us Heade t B r
Standb ower Headey P r
T P ( t torru edst la ormtf Module TP /PM) or 80 Connec
G t t RJ P tsigabi Etherne 45 or
25 28 orGbE SFP LAN P ts
Mo herboard Moun ing Holet t s
CPU SL 6 PCIe 4.0 x8OT
CPU SL 7 PCIe 4.0 x16OT
F s U 2.0 sront Acces ible SB Header
Back P U P tsanel SB 3.0 or
VGA P tor
Unit Identifier Switch
JMD1: M.2 -H PCIe 3.0 x4 /S A 3.0AT
JMD2_S RW1
JPG1
MH5
JLA LE D3
JBM1
MH
JLANL ED2
JNVI2C1
JRK1JIPMB1
JMD2_S RW2
JPME2
JWD1
JPH1
JPL3JVRM1JSDP4
JSDP1
JSFPL ED1
JOPP S
JLANL ED1
USB2 /3 US B0/1 J SMB1
J1
JG 1
I-S A3AT
I-S A1AT
JSLI M2 JSLIM1
PCIe 3.0 X4
PCIe 3.0 X4
JN 1F NB
MH2
JPT1
JRF1
JD1
JTPM1
JMD3_S RW1
JMD2
JSIM1
MH4
JSTBY 1
JSD1
M.2_H PCIe 3 .0 X2/ S-S A 3. 0AT
FANA
LED
FAN4
COM1
JF1
JMD3
M.2-H PCIe 3.0 X1
I-SGPI O1
CPU SL OT7 PCIe 4.0 X16
CPU SL OT6 PCIe 4.0 X8
JPCIE7
JPCIE6
LEDM1
VGA
JMD1_S RW1
LED2
LED3
JUIDB1
LAN3 /4
JLAN2
LAN1 /2
JLAN1
LAN5 /6
SFP1
X12SDV-4C-SP6F
DESIGNED IN USA
REV: 1.02
CPU
MH3
USB4 /5 (3. 0)
IPMI_ LAN
JPL2
JSDP3
JSDP2
JPL1
JPWR1
JPI2 C1
JL1
FAN3
JBT1
JNVI2C2
FAN2 FAN1
MH1
JPV1
BT1
JPF1
DIMMA2DIMMA1
DIMMB2
DIMMB1
LEDT2
LEDT4
LEDT1
LEDT3
BMC: XXXXXXXXXXXX
PWD: XXXXXXXXXX
IPMI LAN
US /5B4
J 2PL
L /2AN1
JPH1
L /4AN3
LED3
J BY1ST
FAN3
JPME2
JNVI2C2
FAN4
DI 1MMA
DI 2MMB
DI 2MMA
DI 1MMB
JF1
JBT1
US /3B2
JMD2_SRW2
US /1B0
JSD1
J M1SLI
J 1PI2C
L /6AN5
J D1SFPLE
SLOT7
MH3
J 1PG
SLOT6
JMD1
JBM1
J SOPP
LED1
FAN1
COM1
BT1
JS 1MB
I-S A3AT
J M1TP
CPU
JL1
J 1PT
J 1GP
I-S A1AT
J 1PL
LEDM1
LED2
JU DBI 1 AVG
JLANLED3
JSDP2
JSDP3
FAN2
J R1PW
J 1PV
J 1PF
MH1
I- 1SGPIO
JMD3
FANA
J M2SLI
JNS1
FANB
JD1
MH2
MH4
J M1SI
J1
JMD2
JWD1
JMD3_SRW1
J 3PL
JL D2ANLE
JL D1ANLE
JSDP1
JSDP4
JMD2_SRW1
MH5
MH6 JMD1_SRW1
JRK1
J 1IPMB
BMC
Password
Label
JNVI2C1

Produkt Specifikationer

Mærke: Supermicro
Kategori: Ikke kategoriseret
Model: SuperServer SYS-510D-10C-FN6P

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro SuperServer SYS-510D-10C-FN6P stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Supermicro Manualer

Supermicro

Supermicro A1SAM-2750F Manual

22 Juli 2025
Supermicro

Supermicro A2SAN-H Manual

21 Juli 2025
Supermicro

Supermicro A3SSV-24C-SPLN10F Manual

21 Juli 2025
Supermicro

Supermicro A4SAN-E Manual

21 Juli 2025
Supermicro

Supermicro SuperWorkstation 5039C-I Manual

21 Juli 2025
Supermicro

Supermicro X12STN-L-WOHS Manual

21 Juli 2025
Supermicro

Supermicro X10SDV-2C-TLN2F Manual

21 Juli 2025
Supermicro

Supermicro SuperServer SYS-530AD-I Manual

20 Juli 2025
Supermicro

Supermicro SuperServer SYS-741GE-TNRT Manual

20 Juli 2025
Supermicro

Supermicro X10SDV-4C+-TLN4F Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech

Advantech EAI-3100 Manual

30 Juli 2025
Deye

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025
Crestron

Crestron STIRP Manual

30 Juli 2025
Intellinet

Intellinet 790741 Manual

30 Juli 2025
Saris

Saris Edge 2-Bike Manual

30 Juli 2025
Advantech

Advantech ROM-3310 Manual

30 Juli 2025
Advantech

Advantech EKI-1751I Manual

30 Juli 2025
Advantech

Advantech ICR-1601W Manual

30 Juli 2025
C2G

C2G 29341 Manual

30 Juli 2025
Advantech

Advantech ITA-8120 Manual

30 Juli 2025