Supermicro SuperWorkstation 7038A-I Manual

Supermicro Ikke kategoriseret SuperWorkstation 7038A-I

Læs gratis den danske manual til Supermicro SuperWorkstation 7038A-I (71 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Supermicro SuperWorkstation 7038A-I, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/71
SuperWorkstation
7038A-I
USER’S MANUAL
1.0a
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0a
Release Date: May 11, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperWorkstation 7038A-I.
Installation and maintenance should be performed by experienced technicians only.
The SuperWorkstation 7038A-I is a high-end system based on the SC732D4-903B
tower/4U rackmount chassis and the X10DAi serverboard.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
system and describes the main features of the X10DAi serverboard and the
SC732D4-903B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to setup the SuperWorkstation 7038A-I
into a rack and check out the server conguration prior to powering up the system. If
your system was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperWorkstation 7038A-I.

Produkt Specifikationer

Mærke: Supermicro
Kategori: Ikke kategoriseret
Model: SuperWorkstation 7038A-I

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro SuperWorkstation 7038A-I stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Supermicro Manualer

Supermicro

Supermicro SuperWorkstation 5039C-I Manual

21 Juli 2025
Supermicro

Supermicro X12STN-L-WOHS Manual

21 Juli 2025
Supermicro

Supermicro X10SDV-2C-TLN2F Manual

21 Juli 2025
Supermicro

Supermicro SuperServer SYS-530AD-I Manual

20 Juli 2025
Supermicro

Supermicro SuperServer SYS-741GE-TNRT Manual

20 Juli 2025
Supermicro

Supermicro X10SDV-4C+-TLN4F Manual

20 Juli 2025
Supermicro

Supermicro X12SDV-8C-SPT4F Manual

20 Juli 2025
Supermicro

Supermicro SuperServer SYS-551A-T Manual

20 Juli 2025
Supermicro

Supermicro X12SDV-8C-SPT8F Manual

20 Juli 2025
Supermicro

Supermicro X11SDV-4C-TP8F Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hager

Hager EC372 Manual

21 Juli 2025
Alpine

Alpine MRV-1002 Manual

21 Juli 2025
Kramer

Kramer VP-4x4K Manual

21 Juli 2025
Hager

Hager TRC270F Manual

21 Juli 2025
Speco Technologies

Speco Technologies O2DB1 Manual

21 Juli 2025
WowWee

WowWee Roboraptor Manual

21 Juli 2025
Hager

Hager EV102 Manual

21 Juli 2025
Cateye

Cateye Volt300 HL-EL460RC Manual

21 Juli 2025
Alpine

Alpine KCE-100V Manual

21 Juli 2025
Kramer

Kramer KAC-SPK-15 Manual

21 Juli 2025