Supermicro X10SDV-TP8F Manual

Supermicro Ikke kategoriseret X10SDV-TP8F

Læs gratis den danske manual til Supermicro X10SDV-TP8F (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Supermicro X10SDV-TP8F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

SUPERMICR R

ContaCt nformatIon I

• Manuals: http://www.supermicro.com/support/manuals

• Drivers & Utilities: ftp://ftp.supermicro.com/CDR_Images/CDR-X10-UP/

• Safety: http://www.supermicro.com/about/policies/safety_information.cfm

consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.

P CaCkage ontents

X10sDV f atX s

leX erIes

Q r g r . 1.0uICk eferenCe uIDe eV 0

• One (1) Supermicro Motherboard

• Four (4) SATA Cables

• Four (4) Mini-SAS HD Cables (7TP8F/7TP4F)

• One (1) I/O Shield

• One (1) Quick Reference Guide

• Website: www.supermicro.com

• General Information: marketing@supermicro.com

• Technical Support: support@supermicro.com

• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008

f or your system to work ProPerly Please DownloaD aPProPrIate,

DrIVers Images user s manual from the lInks below/ / ' :

MNL-1858-QRG-100

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

Item # Jumper Description Default

21 JBR1 BIOS Recovery Pins 1-2 (Normal)

74 JBT1 CMOS Clear Open: Normal, Short: Clear CMOS

16, 17 JI2C1, JI2C2 SMB to PCI-E Slots Pins 2-3 (Disabled)

14 JPB1 BMC Enable (Debug use only) Pins 1-2 (Enabled)

18 JPG1 VGA Enable Pins 1-2 (Enabled)

6, 7, 9 LAN1, LAN2, LAN3/4/5/6 Enable Pins 1-2 (Enabled)JPL1, JPL2, JPL3 (JPL3: TP8F/TP8F)

40 JPME1 ME Recovery Pins 1-2 (Normal)

64 JPME2 Manufacturing Mode Pins 1-2 (Normal)

53 JPTG1 10Gb Ethernet Enable Pins 1-2 (Enabled)

20 JPS1 (7TP8F/7TP4F only) SAS 2.0 Enable/Disable Pins 1-2 (Enabled)

51 JPUSB1 USB Wakeup (For USB0/1) Pins 1-2 (Enabled)

22 JWD1 Watch Dog Enable Pins 1-2 (Reset)

BAR CODE

JTGLED1

X10SDV-TP8F

REV:1.01

DIMMB1

DIMMA2

DIMMB2

DIMMA1

BT1

LED3

LEDM1

LED8

LED7

JITP1

DESIGNED IN USA

COM1

PRESS FIT

JPS1JPG1 JWD1

JPME2

JBR1

JPUSB1

JPL1

JPL2

JPME1

JPL3

JPTG1

JI2C2JI2C1JSMB1JPB1

JNVI2C1

JIPMB1

LEDT4

LEDT2

LEDT3

LEDT1

LEDS1

MP_SRW1

MP_SRW2

JMP1

FAN4

FANA

FANB

FAN1

FAN3

FAN2

JSTBY1

JLANLED1

I-SGPIO1

I-SATA3

I-SATA2

I-SATA0

I-SATA1

JSD1

JSD2

JOH1

JL1

JTPM1

JF1

JSAS4

PRESS FIT

JSAS3

PRESS FIT

JSAS2

PRESS FIT

JSAS1

PRESS FIT

JPW1

JPI2C1

JD1

JGP1

JPH1

JPV1

M2_SRW2

M2_SRW3

M2_SRW1

VGA

LAN 7/8

LAN 5/6 LAN 3/4 LAN 1/2

JO H1-OH

SATA POWER

L-SAS12-15

L-SAS0-3

L-SAS4-7

L-SAS8-11

IPMI_LAN

2-3:D ISABLE

1-2:ENABLEJPUSB1: USB0/1 WAKE UP

2-3:D ISABLE

LAN3/4/5/6

1-2:ENABLE

JPL3:

PWR RST NIC1 L

PCI-E 2.0 X1 / I-SATA5

CPU SLOT7 PCI-E 3.0 X8

CPU SLOT6 PCI-E 3.0 X8

USB 5/6

USB 3/4

USB 2

USB 0/1(3.0)

PCI-E 3.0 X4 / I-SATA4

JMD1: M.2

Intel Xeon

D-1500

SoC

1-2:ENABLE

2-3:D ISABLE

JPG1 :

2-3:D ISABLE

JPL1/JPL2:

1-2:ENABLE

JL1:2-3:NMI

1-2:RS T

JWD1: WATCH DO G

JBT1:

LAN2LAN1/

CHASS IS

CMOS

INTRUSIO N

CLEAR

4-7:S PEAKER

1-3:P WR LED

JD1:

1-2:ENABLE

2-3:D ISABLE

JI2C1 /JI2C2:

UID

1-2:ENABLE

2-3:D ISABLE

JPS1 :SAS

2-3:D ISABLE

1-2:ENABLE

JPTG 1: 10Gb LAN

JBR1

1-2:NO RMAL

2-3:BIO S RECO VERY

LSI

2116

(-7TP4F/-7TP8F)

BMC

AST2400

PHY

10GbE

CS2447

i350

AM4

(-7TP8F/

-TP8F)

DIMM Memory Installation

Jumpers and Connectors

Memory Support

Motherboard Layout and Features

Jumpers

Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this

guide.

Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors, and LED indica-

tors.

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/

motherboard installation instructions.

= mounting hole

Front Panel Control (JF1)

37 42

44 45 46

59 60

39 40

32 33 34 35

29 30

Note: Item numbers are shown in counterclockwise order

LED Indicators

Item # LED Description Color/State Status

38 LED3 Power LED Green: On System Power On

12 LED7 UID Switch LED Blue: On Unit Identied

56 LED8 Overheat/PWR Fail/Fan Fail LED Red: Solid on

Blinking

Solid On: Overheat,

Blinking: PWR Fail or Fan Fail

57 LEDM1 BMC Heartbeat LED Green: Blinking BMC: Normal

67 LEDS1 SAS Heartbeat LED

(7TP8F/7TP4F)

Green: Blinking

Red

SAS Active

SAS Error

LED Indicators

Back Panel I/O

A. IPMI LAN E. LAN Port 1 I. LAN Port 5

B. USB Port 1 F. LAN Port 4 J. LAN Port 8 (SFP+)

C. USB Port 0 G. LAN Port 3 K. LAN Port 7 (SFP+)

D. LAN Port 2 H. LAN Port 6 L. VGA Port

Power Button

OH/Fan Fail/PWR Fail

NIC1 Activity LED

Reset Button

HDD LED

FP PWR DLE

Reset

PWR

3.3 V

3.3V Stby

Ground

1516

Power Fail LED

NIC2 Activity LED 3.3V Stby

3.3V Stby

UID LED

3.3V

Item # Connector Description

75 BT1 Onboard Battery

19 COM1 COM1 Header

47,44,43,35,30,29 FAN1 ~ FAN4, FANA-B CPU/System Cooling Fans

1 IPMI LAN Dedicated IPMI LAN Port

71,70,28,26,69,62 I-SATA0 ~ I-SATA5 Intel ® Serial ATA Ports (I-SATA0, I-SATA1 support SuperDOM, I-

SATA4 via M.2, I-SATA5 via Mini-PCIE mSATA)

42 I-SGPIO1 Serial Link General Purpose I/O Headers

68 JD1 Speaker/Buzzer (Pins 1-3: Power LED, Pins 4-7: Speaker)

39 JF1 Front Panel Control Header

41 JGP1 General Purpose I/O Header

13 JIPMB1 4-pin External SMbus I 2C Header (for an IPMI Card)

23 JL1 Chassis Intrusion Header

65 JLANLED1 LAN3 ~ LAN6 Activity LED Header (7TP8F/TP8F only)

69 JMD1 M.2 PCI-E 3.0 X4 / I-SATA4 Slot

62 JMP1 Mini PCI-E 2.0 X1 / I-SATA5 Slot

63 JNVI 2C1 NVMe I2C Header

24 JOH1 Overheat LED Header

45 JPH1 4-pin Power Connector for HDD use (To provide power from the

motherboard to onboard HDD devices.)

49 JPI 2C1 Power Supply SMBus I

2C Header

50 JPV1 12V 8-pin DC Power Connector (To provide alternative power for

special enclosure when the 24-pin ATX power is not in use.)

48 JPW1 24-pin ATX Main Power connector

72, 73 JSD1, JSD2 SATA DOM (Device On Module) Power Connector

15 JSMB1 SMBus Header

46 JSTBY1 Standby Power Header

66 JTGLED1 LAN7 ~ LAN8 Activity LED Header

37 JTPM1 Trusted Platform Module (TPM)/Port 80 Connector

3, 4

5, 8

LAN1/2, LAN3/4

LAN5/6, LAN7/8

Gigabit Ethernet (RJ45) Ports (LAN1~LAN6) (LAN3 ~ LAN6 on 7TP8F/

TP8F only). 10Gigabit Ethernet (SFP+) Ports (LAN7 ~ LAN8)

34, 33, 31, 32 LSAS0 ~ LSAS15 SAS 2.0 Ports (7TP8F/7TP4F only)

52, 54, 55 M2-SRW1 ~ SRW3 M.2 Mounting Screws

59, 58 MP-SRW1 ~ SRW2 PCI-E 2.0 X1 / I-SATA5 Slot Mounting Screws

60, 61 SLOT6, SLOT7 CPU PCI-E 3.0 X8 Slot

11 UID Unit Identier (UID) Button

2 USB0/1 Back panel USB 3.0 Ports

36 USB2 USB Type-A

27, 25 USB3/4, USB5/6 Front Access USB 2.0 Ports

10 VGA Back panel VGA Port

The X10SDV Flex ATX Series motherboard supports up to 128GB of DDR4

ECC RDIMM or 64GB of DDR4 ECC/Non-ECC UDIMM.

Note: Check the Supermicro website for recommended memory modules.

Module Notch

2. Install the DIMM module straight down into the socket until it is securely

seated in the socket. The side clips will automatically lock the module into

place.

When installing memory modules, the DIMM slots should be populated in the

following order: DIMMA1, DIMMB1, then DIMMA2, DIMMB2.

• Always use DDR4 DIMM modules of the same size, type and speed. Mix-

ing memory modules of different types and speeds is not allowed. The

motherboard will support one DIMM module installed. However, for best

memory performance, install DIMM modules in pairs.

Installing DIMM Memory Modules

1. Align the key on the bottom of the DIMM module against the key on the

memory slot. Take note of the notches on the side of the DIMM module,

and of the locking clips on the socket to avoid causing damage.

Module Key

Socket Key Locking Clip

DIMMB2

DIMMB1

DIMMA2

DIMMA1

Back Panel I/O Connectors

70 71

72 73 74

Recommended Population (Balanced)

DIMMA1 DIMMB1 DIMMA2 DIMMB2 Total System Memory

4GB 4GB 8GB

4GB 4GB 4GB 4GB 16GB

8GB 8GB 16GB

8GB 8GB 8GB 8GB 32GB

16GB 16GB 32GB

16GB 16GB 16GB 16GB 64GB

32GB 32GB 64GB

32GB 32GB 32GB 32GB 128GB

LAN3 ~ LAN6 is available on 7TP8F/TP8F only

Connectors

CPU Support

Intel® Xeon/Pentium D-1500 Family Processor (BGA).

Produkt Specifikationer

Mærke:	Supermicro
Kategori:	Ikke kategoriseret
Model:	X10SDV-TP8F
Bredde:	228.6 mm
Dybde:	184.2 mm
Wi-Fi:	Ingen
Ethernet LAN-porte (RJ-45):	8
Antal USB 2.0-porte:	5
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	2
Ethernet LAN:	Ja
Driftstemperatur (T-T):	0 - 60 °C
Bæredygtighedscertifikater:	RoHS
Maksimal intern hukommelse:	128 GB
On-board grafikkort, model:	Aspeed AST2400
Processorproducent:	Intel
Antal VGA-porte (D-sub):	1
Ethernet-grænsefladetype:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Trusted Platform Module (TPM):	Ja
Processor sokkel:	BGA 1667
Understøtter RAID:	Ja
Fejlkorrigerende kode:	Ja
Understøttede hukommelsestyper:	DDR4-SDRAM
Ikke-fejlkorrigerende kode:	Ja
Understøttede hukommelsesclock-hastigheder:	1600,1866,2133 MHz
Antal SATA III-stik:	4
Antal COM-stik:	1
Motherboard form faktor:	Flex-ATX
Understøttede lagerdrev brugerflader:	SATA III
BIOS-type:	AMI
BIOS-hukommelsesstørrelse:	128 Mbit
ACPI-version:	5.0
RAID-niveauer:	0, 1,5, 10
Antal understøttede processorer:	1
Hukommelsesspænding:	1.2 V
TPM-stik:	Ja
Antal DIMM-slots:	4
Trusted Platform Module (TPM) version:	2.0
PCI Ekspres x8 (Gen 3.x) slots:	2
Understøttet RDIMM-clockhastigheder:	1600,1866,2133 MHz
IPMI LAN (RJ-45) port:	Ja
Understøttet DIMM modul kapaciteter:	4GB, 8GB, 16GB, 32GB
Maksimal RDIMM hukommelse:	128 GB
Intel® Xeon serie:	D-1500
Maksimal UDIMM hukommelse:	64 GB
Antal understøttede processor cores:	4
Processor, termisk ydeevne (maks.):	35 W
Understøtter LRDIMM clock hastigheder:	1600,1866,2133 MHz