Supermicro X10SLQ Manual

Supermicro Bundkort X10SLQ

Læs gratis den danske manual til Supermicro X10SLQ (113 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Supermicro X10SLQ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/113

X10SLQ

X10SLQ-L

USER’S MANUAL

Revision 1.1a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

•Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.1a

Release Date: April 14, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Produkt Specifikationer

Mærke:	Supermicro
Kategori:	Bundkort
Model:	X10SLQ
Bredde:	244 mm
Dybde:	244 mm
Opbevaringstemperatur (T-T):	0 - 60 °C
Antal HDMI-porte:	1
Ethernet LAN-porte (RJ-45):	2
Antal USB 2.0-porte:	4
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	2
Ethernet LAN:	Ja
Intern hukommelse:	32 GB
Lyd-output kanaler:	7.1 kanaler
Strømkilde type:	ATX
On-board grafikkort:	Ja
Processorproducent:	Intel
Antal DisplayPorts:	1
Antal VGA-porte (D-sub):	1
Ethernet-grænsefladetype:	Fast Ethernet, Gigabit Ethernet
Grafikadapter:	HD Graphics 4600
Antal PS/2-porte:	2
Processor sokkel:	LGA 1150 (stik H3)
Kompatibel processor serie:	Intel Celeron, Intel Pentium
Bundkort chipset familie:	Intel
Bundkort chipsæt:	Intel® Q87
Understøttede hukommelsestyper:	DDR3-SDRAM
Hukommelses slots type:	DIMM
Understøttede hukommelsesclock-hastigheder:	1600 MHz
Ikke-bufferet hukommelse:	Ja
Antal SATA III-stik:	6
LAN Kontroller:	Intel I210-AT, Intel I217LM
USB 2.0-stik:	4
USB 3.2 Gen 1 (3.1 Gen 1) stik:	2
Antal COM-stik:	4
Antal DVI-D-porte:	1
Motherboard form faktor:	micro ATX
Understøttede lagerdrev brugerflader:	SATA III
BIOS-type:	AMI
BIOS-hukommelsesstørrelse:	128 Mbit
ACPI-version:	5.0
RAID-niveauer:	0, 1,5, 10
Hukommelsesspænding:	1.35, 1.5 V
PCI Ekspres x16 (Gen 3.x) slots:	1
TPM-stik:	Ja
Grafikadapter familie:	Intel
PC sundhedsovervågning:	FAN, LED, Temperature, Voltage
PCI Ekspres x1 (Gen 2.x) slots:	1
Intel® Core i3/i5/i7/i9 serie:	i3-4xxx, i5-4xxx, i7-4xxx
Understøttet UDIMM-clockhastigheder:	1600 MHz
Understøttede hukommelsesmodulkapaciteter:	1GB, 2GB, 4GB, 8GB
PCI Ekspres x4 (Gen 2.x) slots:	1
PCIe Mini Card Slot (fuld længde):	1
Understøttet UDIMM modul kapacitet:	32GB