Supermicro X6DAL-B2 Manual

Supermicro Bundkort X6DAL-B2

Læs gratis den danske manual til Supermicro X6DAL-B2 (116 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Supermicro X6DAL-B2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/116
®
X6DAL-B2
X6DAL-TB2
USER’S MANUAL
Revision 1.1
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be contained
in this document, makes no commitment to update or to keep current the information in this
manual, or to notify any person or organization of the updates. Please Note: For the most
up-to-date version of this manual, please see our web site at www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM
THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO
COMPUTER SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA
STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, RE-
PLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE,
OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa
Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro’s total
liability for all claims will not exceed the price paid for the hardware product.
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the manufacturer’s instruction manual, may cause interference with radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures: · Reorient or relocate the receiving
antenna. · Increase the separation between the equipment and the receiver. · Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Per-
chlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlor-
ate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other reproduc-
tive harm.
Revision Number: Rev. 1.1
Release Date: June 12, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America

Produkt Specifikationer

Mærke: Supermicro
Kategori: Bundkort
Model: X6DAL-B2

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro X6DAL-B2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bundkort Supermicro Manualer

Supermicro

Supermicro H12DSi-NT6 Manual

2 Oktober 2025
Supermicro

Supermicro BH12SSi-M25 Manual

2 Oktober 2025
Supermicro

Supermicro X11SSV-Q Manual

2 Oktober 2025
Supermicro

Supermicro X9SCM-iiF Manual

2 Oktober 2025
Supermicro

Supermicro X11SPA-T Manual

2 Oktober 2025
Supermicro

Supermicro H13DSH Manual

2 Oktober 2025
Supermicro

Supermicro B12SPE-CPU-25G Manual

2 Oktober 2025
Supermicro

Supermicro H12SSW-NTR Manual

2 Oktober 2025
Supermicro

Supermicro H12SSW-NTL Manual

2 Oktober 2025
Supermicro

Supermicro X7DVA-E ServerBoard Manual

2 Oktober 2025

Bundkort Manualer

Nyeste Bundkort Manualer

Advantech

Advantech ASMB-935 Manual

27 September 2025
Advantech

Advantech ASMB-927 Manual

27 September 2025
Advantech

Advantech ASMB-975 Manual

27 September 2025
Advantech

Advantech ASMB-925 Manual

27 September 2025
Advantech

Advantech ASMB-831 Manual

26 September 2025
Advantech

Advantech ASMB-976 Manual

26 September 2025
Advantech

Advantech ASMB-561 Manual

26 September 2025
ECS

ECS ADLN-I3 IPC Manual

17 September 2025
Asrock

Asrock H810TM-ITX Manual

16 September 2025
Asrock

Asrock B850 Challenger WiFi Manual

16 September 2025