Supermicro X8DT3 Manual


Læs gratis den danske manual til Supermicro X8DT3 (98 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Supermicro X8DT3, eller vil du spørge andre brugere om produktet?

Side 1/98
X8DT3
X8DTi
USER’S MANUAL
Revision 1.0a
X8DT3-F
X8DTi-F
X8DTi-LN4F
X8DT3-LN4F
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Manual Revision 1.0a
Release Date: April 30, 2009
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.


Produkt Specifikationer

Mærke: Supermicro
Kategori: Bundkort
Model: X8DT3
Bredde: 305 mm
Dybde: 330 mm
Opbevaringstemperatur (T-T): -40 - 70 °C
Relativ luftfugtighed ved drift (H-H): 8 - 90 %
Relativ luftfugtighed ved opbevaring (H-H): 5 - 95 %
Ethernet LAN-porte (RJ-45): 2
Antal USB 2.0-porte: 2
Driftstemperatur (T-T): 10 - 35 °C
Strømkilde type: ATX
Maksimal intern hukommelse: 96 GB
Processorproducent: Intel
Antal VGA-porte (D-sub): 1
Grafikadapter: G200eW
I/O-porte: 8 x SAS
Netværksfunktioner: Gigabit Ethernet
Antal serielle porte: 1
Antal PS/2-porte: 2
Processor sokkel: Socket B (LGA 1366)
PCI Ekspres x8 slots: 3
Bundkort chipsæt: Intel® 5520
Antal hukommelsesstik: 12
LAN Kontroller: Intel® 82576
USB 2.0-stik: 6
Antal SATA stik: 6
Motherboard form faktor: Udvidet ATX
BIOS-type: AMI
RAID-niveauer: 0, 1,10
Hukommelsesspænding: 1.5 V
Floppy-drev, stik: Ja
Controller (2.) grænsefladetype: SAS
Controller-grænsefladetype: SATA
PCI-slots: 2
PCI Ekspres x4 slots: 1
IPMI 2.0 slot: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Supermicro X8DT3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Bundkort Supermicro Manualer

Bundkort Manualer

Nyeste Bundkort Manualer

Advantech

Advantech ASMB-935 Manual

27 September 2025
Advantech

Advantech ASMB-927 Manual

27 September 2025
Advantech

Advantech ASMB-975 Manual

27 September 2025
Advantech

Advantech ASMB-925 Manual

27 September 2025
Advantech

Advantech ASMB-831 Manual

26 September 2025
Advantech

Advantech ASMB-976 Manual

26 September 2025
Advantech

Advantech ASMB-561 Manual

26 September 2025
ECS

ECS ADLN-I3 IPC Manual

17 September 2025
Asrock

Asrock H810TM-ITX Manual

16 September 2025