SVS SoundPath Tri-Band Manual

SVS Netværkskort/adapter SoundPath Tri-Band

Læs gratis den danske manual til SVS SoundPath Tri-Band (8 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om SVS SoundPath Tri-Band, eller vil du spørge andre brugere om produktet?

Side 1/8
TRI-BAND WIRELESS AUDIO
ADAPTER
Owner’s Manual
Thank you for choosing SVS!
Congratulations on bringing home the , the SVS SoundPath Tri-Band Wireless Audio Adapter
best solution available for eliminating subwoofer cable clutter without sacrificing performance.
Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo
speakers, powered surround sound speakers, amplifiers, and any stereo audio component.
The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.8 GHz
bands and is highly resistant to all forms of wireless interference from common household
devices. Seamless switching between channels ensures your subwoofer, speakers or other audio
components will remain connected in even the most congested wireless environments so you can
always enjoy uninterrupted listening experiences.
Installation requires only a few simple steps. If you have questions about subwoofer or speaker
placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,
please contact the SVS Sound Experts tech support 7-days-a-week.
custservice@svsound.com | 877.626.5623 | www.svsound.com
Specifications & Features
Adapter Includes
» Tri-Band Wireless Audio Transmitter
» Tri-Band Wireless Audio Receiver
» Mono RCA to RCA interconnect cable (x2)
» USB A to micro B power cable for power adaptor (x2)
» 5V DC power adapter with USB A Connector (x2)
» Velcro for securing devices (x2)
What You Will Need
» Output device (subwoofer, powered speakers or amplifier)
» Source device (AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out
or L/R line level pre-out)
Specifications
Operating Voltage
RF Frequency Band
Sample Rate
Working Distance
Transmitter analog input level
Receiver analog output level
Frequency Response
Latency
THD+N (dB)
SNR (dB)
Receiver
Minimum power requirement:
4.75V @0.3ARF
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
N/A
Maximum 1Vrms
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz
Transmitter
Minimum power requirement:
5V @0.5A
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
Maximum 2Vrms
N/A
6Hz – 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz – 20kHz)
+ 105 dB 10Hz – 20kHz


Produkt Specifikationer

Mærke: SVS
Kategori: Netværkskort/adapter
Model: SoundPath Tri-Band

Har du brug for hjælp?

Hvis du har brug for hjælp til SVS SoundPath Tri-Band stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter SVS Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer