Swan SDW7040LN Manual

Swan Opvaskemaskine SDW7040LN

Læs gratis den danske manual til Swan SDW7040LN (25 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Swan SDW7040LN, eller vil du spørge andre brugere om produktet?

Side 1/25
Compartment A:
Compartment
Compartment
Compartment
Compartment Compartment A:
A:
A:
A:A:
With each wash cycle.
Compartment B:
B:
B:
B:
B:B:
For programmes with pre-wash only.
(Follow the user instructions!)
Mechanical indicator C.
Mechanical indicator
Mechanical indicator
Mechanical indicator
Mechanical indicator Mechanical indicator
C.
C.
C.
C.C.
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Close the door, t urn on the water tap. The machine will start working after about 10 seconds.
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Open the door and press the power button, then press program button to select your desired program.
( See the section entitled Operationg instruction )
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance by pressing the Power button.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot steam may escape
when the door is opened!
WARNING!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
Press the Power switch button to switch on the appliance, Open the door.
1.Open the door to stop the machine.
2.Add the forgotten dishes, when the sprayers stop running completely.
3.Close the door, and the dishwasher will start running again after 10
seconds.
Quick operation guide
Quick operation
Quick operation
Quick operation
Quick operationQuick operation guide
guide
guide
guide guide
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. If the detergent has
already been released and the water has already been drained out, the detergent dispenser must
be refilled.
2. Open the door carefully. When sprayers stop running, pless press the program button more than
3 seconds to cancel the running programme.
3. Select a new programme.
4. Close the door to restart the dishwasher.
C
C
C
C
CC
A
A
A
A
AA
B
B
B
B
BB


Produkt Specifikationer

Mærke: Swan
Kategori: Opvaskemaskine
Model: SDW7040LN

Har du brug for hjælp?

Hvis du har brug for hjælp til Swan SDW7040LN stil et spørgsmål nedenfor, og andre brugere vil svare dig




Opvaskemaskine Swan Manualer

Swan

Swan SDW65 Manual

22 September 2024
Swan

Swan SDW7030W Manual

28 Juli 2024
Swan

Swan SDW7040RN Manual

27 Juli 2024
Swan

Swan SDWB2020 Manual

21 Juli 2024
Swan

Swan SDW7040ON Manual

19 Juni 2023
Swan

Swan SDW7040LN Manual

6 December 2022
Swan

Swan SDW7040CN Manual

5 December 2022
Swan

Swan SDW2020W Manual

3 November 2022

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer