Swan SDW7040CN Manual

Swan Opvaskemaskine SDW7040CN

Læs nedenfor 📖 manual på dansk for Swan SDW7040CN (25 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 28 personer og blev bedømt med 4.7 stjerner i gennemsnit af 14.5 brugere

Download PDF

Side 1/25

Compartment A:

Compartment

Compartment Compartment A:

A:A:

With each wash cycle.

Compartment B:

B:B:

For programmes with pre-wash only.

(Follow the user instructions!)

Mechanical indicator C.

Mechanical indicator

Mechanical indicator Mechanical indicator

C.C.

Electric indicator on control panel (if provided).

Check the rinse aid level

(On models with water softener system only.)

Electric indicator on control panel (if provided).

If there is no salt warning light in the control panel

(for some models), you can estimate when to fill the salt into

the softener by the number of cycles the dishwasher has run.

Check the regeneration

salt level

Load the baskets

Select a programme

Close the door, t urn on the water tap. The machine will start working after about 10 seconds.

Running the dishwasher

Switch off the appliance

Turn off the water tap,

unload the baskets

Fill the detergent dispenser

Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling

the dishes and utensils while they are still hot and more susceptible to break.

They will also dry better.Unload the appliance, starting from the lower basket.

Changing the programme

Add forgotten dishes in the

dishwasher.

Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,

then load the baskets. Refer to the dishwasher loading instructions.

Open the door and press the power button, then press program button to select your desired program.

( See the section entitled Operationg instruction )

When the working cycle has finished, the buzzer of the

dishwasher will sound 8 times, then stop.

Turn off the appliance by pressing the Power button.

If the appliance is switched

off during a wash cycle.

Open the door carefully.

Hot steam may escape

when the door is opened!

WARNING!

If the appliance is switched off during a wash cycle, when switched

on again, please re-select the washing cycle and operate the dishwasher

according to the original Power-on state ).

Switch on the appliance

Press the Power switch button to switch on the appliance, Open the door.

1.Open the door to stop the machine.

2.Add the forgotten dishes, when the sprayers stop running completely.

3.Close the door, and the dishwasher will start running again after 10

seconds.

Quick operation guide

Quick operation

Quick operationQuick operation guide

guide

guide guide

For detailed operating method read the corresponding content on the instruction manual.

1. A running cycle can only be modified if it has been running for a short time. If the detergent has

already been released and the water has already been drained out, the detergent dispenser must

be refilled.

2. Open the door carefully. When sprayers stop running, pless press the program button more than

3 seconds to cancel the running programme.

3. Select a new programme.

4. Close the door to restart the dishwasher.

Produkt Specifikationer

Mærke:	Swan
Kategori:	Opvaskemaskine
Model:	SDW7040CN
Vekselstrømsindgangsspænding:	230 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	598 mm
Dybde:	600 mm
Højde:	845 mm
Indbygget skærm:	Ingen
Pakkedybde:	695 mm
Pakkebredde:	635 mm
Pakkehøjde:	886 mm
Placering af apparat:	Delvist indbygget
Støjniveau:	44 dB
Antal vaskeprogrammer:	6
Forsinket start-timer:	Ja
Dør farve:	Cremefarvet
Vandforbrug pr. cyklus:	11 L
Antal kuverter:	12 kuverter
Cyklustid:	60 min.
Opvaskeprogrammer:	Eco, Intensive, Normal
Halv belastning:	Ja
Energiforbrug pr. cyklus:	0.91 kWh
Energieffektivitetsskala:	A til G
AquaStop funktion:	Ingen
Produktstørrelse:	Fuld størrelse (60 cm)
Wi-Fi kontrolleret:	Ingen
Støjemissionsklasse:	B
Energieffektivitetsklasse:	E
Energiforbrug pr. 100 cyklusser:	95 kWh
Brugerdefineret panel klar:	Ja
Temperatur (maks):	- °C