Sylvania SRM910-33ECN Manual

Sylvania Åben ildsted SRM910-33ECN

Læs gratis den danske manual til Sylvania SRM910-33ECN (6 sider) i kategorien Åben ildsted. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Sylvania SRM910-33ECN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

ElEctric FirEplacE HEatEr

Model: SRM910-33ECN

iMpOrtaNt: plEasE NOtE wHEN yOu OpEN tHE cartON carEFully

cHEck tHE uNit aNd MakE surE tHErE is NO daMagE. iF yOu

HavE aNy prOblEMs witH assEMbliNg tHE uNit, witH HOw tHE

variOus FuNctiONs wOrk Or witH daMagE Or MissiNg parts

plEasE call 1-800-459-4409 (Est) iMMEdiatEly FOr sErvicE.

NOtE:

dO NOt rEturN uNit tO tHE stOrE bEFOrE calliNg tHE tOll FrEE

NuMbEr.

Do not dispose of your cartons until you are completely satisﬁed with your new

ﬁreplace heater.

NOTE: Light bulbs may become loose during shipping. If the ﬂame effect is dim or

does not work, please check that light bulb or bulbs are ﬁnger tight in socket. See

instructions for replacing bulb or bulbs.

INSTRUCTION MANUAL

attENtiON:

1. Find a location for the ﬁreplace heater that is protected from direct sunlight.

2. Do not plug the unit into the power outlet before reading all instructions.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

IMPORTANT SAFETY

INSTRUCTIONS

wHEN usiNg ElEctrical appliaNcEs, basic prEcautiONs sHOuld

always bE FOllOwEd tO rEducE tHE risk OF FirE, ElEctric sHOck,

aNd iNJury tO pErsONs, iNcludiNg tHE FOllOwiNg:

1) Read all instructions before using this electric ﬁreplace heater.

2) This electric ﬁreplace heater is hot when in use. To avoid burns, do not let bare

skin touch hot surfaces. The grill directly in front of the heater outlet becomes

hot during heater operation. Keep combustible materials, such as furniture,

pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) away from

the front of the unit and keep them away from the sides and rear.

3) Extreme caution is necessary when any heater is used by, or near, children or

individuals with disabilities and whenever the ﬁreplace is left operating

and unattended.

4) Always unplug ﬁreplace when not in use.

5) Do not operate any electric ﬁreplace with a damaged cord or plug or after the

heater malfunctions, has been dropped or damaged in any manner.

6) Do not use outdoors.

7) This electric ﬁreplace heater is not intended for use in bathrooms, laundry

areas and similar indoor locations. Never locate heater where it may fall into a

bathtub or other water container.

8) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or

similar coverings. Arrange cord away from trafﬁc area and where it will not be

tripped over.

9) To disconnect ﬁreplace, turn controls to off, then remove plug from outlet.

10) Connect to properly grounded outlets only.

11) Do not insert or allow foreign objects to enter any ventilation or exhaust open-

ing as this may cause an electric shock or ﬁre, or damage the heater.

12) To prevent a possible ﬁre, do not block air intakes or exhaust in any manner. Do

not use on soft surfaces, like a bed, where openings may become blocked.

13) A heater has hot and arcing or sparking parts inside. Do not use it in areas

where gasoline, paint, or ﬂammable liquids are used or stored.

14) Use this ﬁreplace heater only as described in this manual. Any other use not

recommended by the manufacturer may cause ﬁre, electric shock, or injury to

persons.

15) Avoid the use of an extension cord because the extension cord may overheat

and cause a risk of ﬁre. However, if you have to use an extension cord, the cord

shall be No.16AWG minimum size and rated not less than 1875 watts.

16) Caution: Do not plug this product into a receptacle controlled by a wall switch

or dimmer.

17) When storing or transporting the unit and cord, keep in a dry place, free from

excessive vibration and store so as to avoid damage.

cautiON:

iF yOu usE tHis HEatEr iN cONJuNctiON witH a tHErMal cONtrOl, a

prOgraM cONtrOllEr, a tiMEr Or aNy OtHEr dEvicE tHat switcHEs

tHE HEatEr ON autOMatically, rEMEMbEr tO ObsErvE all saFEty

warNiNgs at all tiMEs. tHE FirEplacE HEatEr Has saFEty OvErHEat

prOtEctiON. iF tHE OvErHEat prOtEctiON trips, switcH OFF all

switcH buttONs aNd wait apprOxiMatEly 5 -10 MiNutEs. it sHOuld

rEsEt autOMatically ONcE tHE uNit cOOls dOwN.

warNiNg:

Procedures and techniques if not carefully followed will result in damage to the

equipment and will expose the user to the risk of serious injury, illness or death.

This electric ﬁreplace heater is for use on 120 volts. The cord has a plug as shown

at A in illustration below. An adapter as shown at C is available for connecting

three-blade grounding-type plugs to two-slot receptacles. The green grounding

plug extending from the adapter must be connected to a permanent ground such

as a properly grounded outlet box. The adapter should not be used if a three-slot

grounded receptacle is available.

A 15 AMP circuit is required to operate this heater. If the breaker trips when the

heater is used then you may need to move the heater to another location or unplug

other appliances that are on the same circuit. If you require an extension cord use

one that is rated at 1875 watts.

SYLVANIA is a registered trademark of OSRAM SYLVANIA, used under license.

ASSEMBLY INSTRUCTIONS

parts list:

Fireplace insert .................................................................................................................... 1

A) Top panel ....................................................................................................................... 1

B) Base panel ..................................................................................................................... 1

C) Upper front panel ........................................................................................................ 1

D) Left front panel ............................................................................................................. 1

E) Right front panel........................................................................................................... 1

F) Left side panel .............................................................................................................. 1

G) Right side panel ............................................................................................................ 1

S) Wood connectors ......................................................................................................... 8

T) Short KD screws ........................................................................................................... 5

U) Mounting Clips ............................................................................................................. 3

V) Mounting Brackets ....................................................................................................... 2

W) KD screws .................................................................................................................... 45

X) Plastic Connectors ....................................................................................................... 13

Y) SELF REPAIR SET

Touch-up repair paint (bottle)

L-shape bracket ................................................................................................................... 2

Screws for L bracket ........................................................................................................... 8

Plastic connectors ............................................................................................................... 1

KD screws ............................................................................................................................ 3

KD nuts ................................................................................................................................. 3

Z) WALL ANCHOR SAFETY CABLE

Wall anchor ......................................................................................................................... 1

Screw for wall anchor ........................................................................................................ 1

Screw for mantle ................................................................................................................. 1

Safety cable ...........................................................................................................................1

This ﬁreplace mantel requires 1 - 2 people to assemble and normally takes 45

minutes - 1 hour to complete.

TOOL REQUIRED: PHILLIPS HEAD SCREWDRIVER

MANTEL ASSEMBLY

CAUTION: Place a piece of cardboard or protective sheet on the ﬂoor in order to

avoid scratching the decorative surface of your mantle during assembly.

Please DO NOT fully tighten the KD screws until all panels are assembled.

NOTE: Each Plastic Connector is pre-assembled (pre-drilled) on the speciﬁc panels

with 2 screws. If the KD screw(s) do not ﬁt during assembly, loosen the 2 (pre-drilled)

screws to adjust the Plastic Connector until the KD screws are able to be installed.

Tighten all KD screws once all panels are assembled.

Step 1: Attach 13 Plastic Connectors [X] to Panel C, D E, F and G with 26 KD screws as

shown in Fig. A. (2 KD screws for each plastic connector). Attach 2 Wood Connectors

[S] to Panel C with 4 KD screws (2 KD screws for each wood connector).

Produkt Specifikationer

Mærke:	Sylvania
Kategori:	Åben ildsted
Model:	SRM910-33ECN

Har du brug for hjælp?

Hvis du har brug for hjælp til Sylvania SRM910-33ECN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Åben ildsted Sylvania Manualer

Sylvania SRM910-33ECN Manual

9 August 2024

Åben ildsted Manualer

Nyeste Åben ildsted Manualer

Napoleon Trivista Pictura NEFL50H-3SV Manual

8 Januar 2025

Napoleon Harsten Bluetooth NEFL50HF-BT Manual

8 Januar 2025

Russell Hobbs RHEFSTV1002B Manual

30 December 2025

24 December 2024

24 December 2024

24 December 2024

24 December 2024

24 December 2024

24 December 2024

24 December 2024