Taga Harmony PF-1000LPS Manual


Læs gratis den danske manual til Taga Harmony PF-1000LPS (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Taga Harmony PF-1000LPS, eller vil du spørge andre brugere om produktet?

Side 1/16
PF-LPS Series [230-240V]
POWER NOISE FILTERS and LINEAR POWER SUPPLY
FOR USE WITH AUDIO-VIDEO EQUIPMENT
Instruction Manual
Edition 12-2023
2
Introduction
Thank you for purchasing this TAGA Harmony power lter.
PF-LPS power lters combine 4 functions in one device: power noise ltering; linear power supply
with selectable output DC voltage for various devices; two USB ports powered by the built-in
linear power supply to use for powering and charging; and surge and overload protection (for all
powered outputs, including DC socket and USB ports).
POWER NOISE FILTERING
The electricity network in our homes or workplaces is exposed to different interferences for
instance electromagnetic interference (EMI) generated by appliances connected to the same
network (refrigerators, air conditioners, computers etc.).
These interferences are not only produced inside your house or ofce but by all appliances in
your building or even outside it and can differ on the time of day or week when the trafc on the
electrical network changes.
All these interferences which we call noises can get into your AC power and interfere with your
system.
This “dirty” electricity can have a negative effect on performance of your audio-video system.
TAGA Harmony power noise lter is a great way to limit the negative noises from your electricity
and to isolate your system from the contaminated power.
The contaminated electricity has also a negative impact on internal circuits and power supplies
of your equipment and because the PF-LPS lter works as a buffer between the wall socket and
your gear helping to increase the longevity of the connected components.
LINEAR POWER SUPPLY FOR DC AND USB OUTPUTS
Most DC-powered electronic devices use simple, low-cost external power adapters with switch-
mode power supplies.
Such adapters operate at high switching frequencies to supply power, which may cause various
electrical noises getting to the connected devices, and even to inject these noises into your
electricity network affecting other equipment. Such noises dramatically deteriorate the sound
performance and efciency of audio-video devices.
The solution is to use a high-quality linear power supply utylized in the PF-LPS lters.
The PF-LPS linear power supply offers a very signicant and immediate upgrade to the sound
performance of your DC-powered devices.
DC output and USB ports utilize:
• High-power 100W, isolating toroidal power transformer providing up to 3A (72W) at 24V.
• 3-tier ltering network:
I & II tier for 230V - 240V voltage : the initial ltering by the device’s power noise ltering system,
and the second by the built-in isolating power transformer.
III tier for the DC Voltage : specially-designed ltering at the end stage separate for the DC
output and USB ports.
DC output:
• Flexible and easy DC output conguration:
- 6 selectable DC output voltages (5V, 9V, 12V, 15V, 19V, 24V).
- Selectable DC output polarity.
• High-quality DC-output cable: 2 x 0.75 mm
2
Oxygen Free Copper conductors.
• Supplied 10 DC plugs (including the one installed on the DC-output cable) in most popular
shapes and sizes allow to use with many DC-powered devices.


Produkt Specifikationer

Mærke: Taga Harmony
Kategori: Ikke kategoriseret
Model: PF-1000LPS

Har du brug for hjælp?

Hvis du har brug for hjælp til Taga Harmony PF-1000LPS stil et spørgsmål nedenfor, og andre brugere vil svare dig