Tanaka TCG31EBSP Manual

Tanaka Plæneklipper TCG31EBSP

Læs gratis den danske manual til Tanaka TCG31EBSP (57 sider) i kategorien Plæneklipper. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Tanaka TCG31EBSP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/57
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
BEFORE operating the power tool. Please keep this manual available for other users and owners before
they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation de cet outil motorisé peut entraîner la mort ou de INCORRECTE OU DANGEREUSE
sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit. Prière de
lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce mode d’emploi à la
disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi
doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización de esta herramienta eléctrica puede provocar lesiones INAPROPIADA O PELIGROSA
graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
TCG31EBS (P)
Model
Modèle
Modelo
TCG 31EBS (P)
TCG 31EBS (LP)
Brush Cutter
Débroussailleuse
Desbrozadoras
2
English
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand
their meaning before use.
It is important that you read, fully
understand and observe the
following safety precautions and
warnings.
Careless or improper use of the
unit may cause serious or fatal
injury.
Shows maximum shaft
speed. Do not use the cutting
attachment whose max rpm is
below the shaft rpm.
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Gloves should be worn
when necessary, e.g., when
assembling cutting equipment.
Always wear eye, head and ear
protectors when using this unit.
Use anti-slip and sturdy
footwear.
Be careful of the engine.
Engine gets hot by running engine.
Blade thrust may occur when
the spinning blade contacts a
solid object in the critical area. A
dangerous reaction may occur
causing the entire unit and
operator to be thrust violently.
This reaction is called blade
thrust. As a result, the operator
may lose control of the unit
which may cause serious or
fatal injury. Blade thrust is more
likely to occur in areas where it
is diffi cult to see the material to
be cut.
Keep all children, bystanders and
helpers 15 m away from the unit.
If anyone approaches you, stop
the engine and cutting attachment
immediately.
Be careful of thrown objects.
Indicate handle location. Do
not attach handle above this
point.
Contents
WHAT IS WHAT .................................................... 3
WARNINGS AND SAFETY INSTRUCTIONS ........ 4
SPECIFICATIONS ................................................. 6
ASSEMBLY PROCEDURES ................................. 7
OPERATING PROCEDURES .............................. 10
MAINTENANCE .................................................. 13

Produkt Specifikationer

Mærke: Tanaka
Kategori: Plæneklipper
Model: TCG31EBSP

Har du brug for hjælp?

Hvis du har brug for hjælp til Tanaka TCG31EBSP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Plæneklipper Tanaka Manualer

Tanaka

Tanaka TCG31EBSP Manual

24 August 2024

Plæneklipper Manualer

Nyeste Plæneklipper Manualer

Gardol

Gardol GLVE 1400-34 Manual

10 September 2025
Toro

Toro 21848 Manual

9 September 2025
Toro

Toro 21843 Manual

9 September 2025
Toro

Toro 21836 Manual

9 September 2025
Toro

Toro GrandStand 79589 Manual

8 September 2025
Toro

Toro 21844 Manual

8 September 2025
Toro

Toro 21811 Manual

8 September 2025
Toro

Toro TimeCutter ZS 4200 Manual

8 September 2025
Graphite

Graphite 59G475 Manual

8 September 2025
Graphite

Graphite 52G673 Manual

7 September 2025