Tandberg Data RDX QuikStation 4 Manual

Tandberg Data Disk array RDX QuikStation 4

Læs gratis den danske manual til Tandberg Data RDX QuikStation 4 (117 sider) i kategorien Disk array. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Tandberg Data RDX QuikStation 4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/117

Product Manual

For QuikStation® 4 and QuikStation 8 Appliances

December 2017

1021970 Rev. C

RDX QuikStation 4 and 8 Product Manual

Sphere 3D Corp.

9112 Spectrum Center Boulevard

San Diego, CA 92123 USA

TEL 1.800.729.8725

1.858.571.5555

FAX 1.858.571.3664

www.sphere3d.com

Overland®, Overland Storage®, ARCvault®, DynamicRAID®, GuardianOS®, NEO®, NEO Series®, PowerLoader®, Protection OS®, RAINcloud®, REO®, REO

4000®, REO Series®, Snap Appliance

®, Snap Care® (EU only), SnapSAN®, SnapScale®, SnapScale X2®, SnapServer®, StorAssure®, Ultamus®, VR2®, and

XchangeNOW® are registered trademarks of Overland Storage, Inc.

Tandberg Data ®

, AccuGuard®, AccuVault®, DPS1000 Series®, DPS1100®, DPS1200®, DPS2000

®, Magnum®, QuikStation®, QuikStor®, RDX®, RDXPRO®,

StorageLibrary®

, StorageLoader®, Tandberg SecureService®

, Tandberg StorageLibrary®, and VXA® are registered trademarks of Tandberg Data, Inc.

Desktop Cloud Orchestrator® and V3® are registered trademarks of Sphere 3D Corp.

Campus Cluster™, NEO Agility™, RapidRebuild™, Snap ECR™, Snap Encrypted Continuous Replication™, SnapExpansion XSR™, SnapScale X4™,

SnapServer DX Series™, SnapServer XSD Series™, SnapServer XSD40™, SnapServer XSR Series™, SnapServer XSR40™, SnapServer XSR120™,

SnapServer Manager™, SnapStorage Manager™, and SnapSync™ are trademarks of Overland Storage, Inc.

BizNAS™, QuadPak™, and RDX+™ are trademarks of Tandberg Data, Inc.

G-Series™, Glassware 2.0™, and SnapCLOUD™ are trademarks of Sphere 3D Corp.

All other brand names or trademarks are the property of their respective owners.

The names of companies and individuals used in examples are fictitious and intended to illustrate the use of the software. Any resemblance to actual

companies or individuals, whether past or present, is coincidental.

PROPRIETARY NOTICE

All information contained in or disclosed by this document is considered proprietary by Sphere 3D Corp. By accepting this material the recipient agrees that

this material and the information contained therein are held in confidence and in trust and will not be used, reproduced in whole or in part, nor its contents

revealed to others, except to meet the purpose for which it was delivered. It is understood that no right is conveyed to reproduce or have reproduced any item

herein disclosed without express permission from Sphere 3D Corp.

Sphere 3D Corp. provides this manual as is, without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Sphere 3D Corp. may make improvements or changes in the product(s) or programs described in this

manual at any time. These changes will be incorporated in new editions of this publication.

Sphere 3D Corp. assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of this manual, nor for any problem that might arise from

the use of the information in this manual.

FW 01.003.05

REVISION HISTORY

Revision DescriptionDate

A June 2016 Initial release

B June 2017 Minor fixes and updates

C December 2017 Minor fixes including static IP configuration