TC Helicon Blender Manual

TC Helicon Stavblender Blender

Læs gratis den danske manual til TC Helicon Blender (2 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 89 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 45 anmeldelser. Har du et spørgsmål om TC Helicon Blender, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Getting Started

1. With the power o, connect your audio sources to the input channels and headphones to the

outputs. Connect the power cable to the 5V socket.

2. Switch the power on.

3. Press the headphone button for the rst output that you want to adjust. It will light blue. Most of the

other functions in this list will be applied to this output only.

4. Turn the big knob down a bit to ensure that the level won’t be too loud.

5. Begin playing audio into Blender.

6. Press the input button for the rst audio source. It will ash blue. If the button ashes red, reduce the

output level of the audio source.

7. Use the big knob to adjust how much of the input’s signal is sent to the currently-selected output.

8. If you want to mix in some ambient room sound, press the Talk button and adjust the level with the

big knob.

9. Repeat steps 5-8 for any other audio sources until a balanced mix is achieved between the sources for

the rst pair of headphones.

10. Press the output button for the next set of headphones and repeat steps 4-9.

11. Visit tc-helicon.com to download the full manual and learn about advanced features such as remote

app control and multitrack recording.

Note – Due to the nature of unbalanced inputs, it is possible that grounding noise will be

transmitted to the outputs. If this happens, try the following steps to alleviate the problem:

• Plug the power cables into dierent power sources, especially dierent outlets from

one another.

• Use the Blender with 4 AA batteries instead of DC power. Do not expose the unit to excessive

heat when using battery power.

• Use your audio sources with battery power if possible.

Controls

(1) INPUTS - Connect stereo sources via ⁄" TRS cable. Pressing the

associated input button causes the button to ash blue, indicating

that the level of that input can be adjusted for the currently-

selected headphone channel using the big knob. If the button

lights red, lower the output level of the source audio.

(2) OUTPUTS - Connect a pair of headphones via ⁄" stereo cable.

Pressing the associated output button causes the button to

light blue, indicating that the headphone volume can be adjusted

with the big knob.

(3) MUTE - Press this button to mute the outputs.

(4) BLUETOOTH - Press this button to make the Blender discoverable

by Android and iOS devices for use with the control app.

(5) RESET - Hold this button for 3 seconds to reset the device to

factory default settings.

(6) COMPRESS - Press this button to compress and boost the

average level for inputs routed to the currently-selected output.

Compression can be engaged and adjusted separately for

each output.

(7) LEVEL METER - Indicates the level of the currently-selected input,

output, or Talk.

(8) BIG KNOB - Adjusts the level of the currently-selected item.

(9) TALK - Pressing this activates the onboard microphone, allowing

some room sound to be mixed into the outputs. While the Talk

button ashes, the level can be adjusted for the currently-selected

output. If another input or output button is pressed, the Talk

button remains lit red, but loses the focus of the big knob. Select

another output channel, then disengage and re-engage Talk so

that it ashes again, enabling the level for that output to

be adjusted.

(10) USB - Connect the included USB cable to a computer for multitrack

recording and rmware updates. Visit tc-helicon.com to download

the USB drivers.

(11) Power - Connect the included power cable.

(12) ON/OFF - Power the unit on and o with this switch.

BLENDER

Portable 12 x 8 Stereo Mixer with USB Connectivity

(1)

(3) (4)

(5)

(6)

(7)

(8)

(9)

(10) (11) (12)

(2)

Phones Volume

Select output

Input Volume

Select output

Other features

Select output

Headphone Volume

Input Volume Rotate to adjust

Produkt Specifikationer

Mærke:	TC Helicon
Kategori:	Stavblender
Model:	Blender

Har du brug for hjælp?

Hvis du har brug for hjælp til TC Helicon Blender stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stavblender TC Helicon Manualer

TC Helicon Blender Manual

30 December 2023

Stavblender Manualer

Nyeste Stavblender Manualer

Maestro MR-501 Manual

8 December 2025

Maestro MR-503 Manual

7 December 2025

Gorenje HBX1500VS Manual

3 December 2025

Sunbeam Mixmaster HeatSoft MXM7000WH Manual

3 December 2025

Gorenje HBX1500VX Manual

2 December 2025

Lakeland 61781 Manual

2 December 2025

Sunbeam Mixmaster MXM5000 Manual

1 December 2025

Sunbeam Mixmaster Combo Pro MXP1000 Manual

29 November 2025

Sunbeam Mixmaster HeatSoft JM7000 Manual

29 November 2025

Chefman RJ19-BP Manual

29 November 2025