Getting Started
The DS-22 comes mounted with an adapter for iPod with color display (40GB, 60GB),
“60GB (color) + Photo 40GB/60GB”. To play your iPod through the DS-22, you have first
to check if the factory mounted adapter fits your model of iPod. If it does not, you have
to replace it with a correct one, as explained below.
1. Remove the adapter from the DS-22.
Hold the left and right sides of the adapter and gently pull it up.
2. Choose the Dock adapter that fits your iPod mobile digital device.
“iPod touch” for iPod touch.
“nano” for iPod nano 1st and 2nd generations.
“nano 3G” 3G for iPod nano 3rd generation.
“mini” for iPod mini.
“Video 30GB” for iPod with video (30 GB)and iPod classic (80 GB).
“Video 60GB/80GB” for iPod with video (60 GB, 80 GB) and iPod classic (160 GB).
“20GB (color) + Photo 30GB” for iPod with color display (20GB, 30GB, U2 Special
Edition).
“60GB (color) + Photo 40GB/60GB” for iPod with color display (40GB, 60GB).
“20GB + U2” for iPod with Click Wheel (20 GB, U2 Special Edition).
“40GB” for iPod with Click Wheel (40 GB).
< Use a commercially available adapter to play iPod with dock connector (with four
buttons under the display).
3. Insert the adapter into the DS-22.
Fit the front edge of the adapter into the Dock, and
then press the back edge of the adapter onto the
Dock until a slight “click” is heard indicating the
adapter is inserted correctly.
< When you need to remove the adapter, hold the left
and right sides of the adapter and gently pull it up.
Specifications
Dimension (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . . . . .100 x 40 x 106 mm (without cable)
Weight ......................................................................370 g
"Made for iPod" means that an electronic accessory has been designed to connect
specifically to iPod and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased
the product.
