Techly ITC-LASER26 Manual

Techly Trådløs præsentationsenhed ITC-LASER26

Læs gratis den danske manual til Techly ITC-LASER26 (2 sider) i kategorien Trådløs præsentationsenhed. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Techly ITC-LASER26, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

User’s manual

WIRELESS PRESENTER

I -LASER26TC

www.techly.com

In compliance with EU Directive WEEE this

product is marked with this symbol. It means

that used electrical and electronic products

should not be mixed with general household

waste. There is a separate collections system

for these products in compliance with WEEE

directive, otherwise contaminative and

hazardous substances can pollute the

environment.

With the CE sign, Techly® ensures that the

product is conformed to the basic European

standards and directives.

INSTALLATION

Install battery.

The presenter supports PowerPoint,

Keynote and Prezi by switching the

functions of the page down/up buttons.

By default, the page down/up buttons

of the presenter function as the

Up/Down Arrow on keyboard, which

can support PowerPoint and Keynote.

By pressing the page down/up buttons

at the same time, the function will

change to the left and right arrows on

the keyboard for Prezi support. Doing it

a second time changes the function to

page up and down, which supports

many other programs.

Pressing them together a third time will

revert back to the default setting.

EN WIRELESS PRESENTER www.techly.com

Take out the mini USB receiver from the

wireless presenter.

Install the USB receiver.

The operation systems including

Windows, Android and Linux will install

the driver for the USB receiver

automatically.

Operate the wireless presenter. When a

button is pressed, the blue led on the

wireless presenter will ﬂash.

Turn off the wireless presenter.

10 11

FREQUENTLY ASKED QUESTIONS

1. How to know the battery is out of

power?

Turn on the power switch of the presenter,

then press laser button to check if the laser

can be turned on. If the laser cannot be

turned on, usually it means the battery is

out of power or the laser diode is broken

and need replacement.

In other case, If the LED on the wireless

presenter starts to ﬂash slowly, it means the

power is low and the battery needs to be

replaced.

2. Why does the laser pointer not work?

First, turn on the power switch. Second,

check whether the wireless presenter is in

low power or out of power. If the LED

ﬂashes slowly, it means the power is low

and the battery needs to be replaced. If all

the other buttons can work, only the laser

pointer cannot work, the laser diode may

need replacement. Third, check the place of

anode and cathode of battery. Before

putting a battery into the presenter,

remember to remove the plastic cover of

the battery.

3. Why does the computer does not

detect the device when the USB

receiver plugs into the PC?

Please check whether the USB works or

not. You can use a USB mouse or keyboard

to test the USB port. If a USB mouse or

keyboard works on the USB port and the

USB receiver of the presenter doesn’t work

, it means the USB receiver of the presenter

is broken or the USB drivers is not

compatible with the USB receiver.

You can try another USB port of the same

computer or USB ports of another

computer to check whether the USB

receiver of the presenter is good or not. If it

works on other computer, it means the USB

drivers of the computer are not compatible

with the USB receiver. You need to back up

your data and reinstall the OS.

4. The laser is ok and the USB receiver

can be detected by the computer, why

does the presenter cannot control the

computer?

The reason is the USB receiver doesn’t

save the presenter’s address properly. You

can use a CodeMatch software to let the

USB receiver to save the presenter’s

address again.

6. 2.

Produkt Specifikationer

Mærke:	Techly
Kategori:	Trådløs præsentationsenhed
Model:	ITC-LASER26
Tænd-/slukkontakt:	Ja
Bredde:	138.8 mm
Dybde:	17.6 mm
Højde:	15 mm
Vægt:	75 g
Antal pr. pakke:	1 stk
Brugervejledning:	Ja
Produktfarve:	Sort
Pakketype:	Kasse
Certificering:	CE, RAEE
LED-indikatorer:	Ja
Batteritype:	AAA
Antal understøttede batterier:	1
Trådløs teknologi:	RF
Kompatible operativsystemer:	Android 4.3
Antal knapper:	3
Frekvensbånd:	2.4 GHz
Brugergrænseflade med trådløs modtager:	USB
Trådløs rækkevidde:	100 m
Understøttede Mac-operativsystemer:	Ja
Understøttede Linux-operativsystemer:	Ja
Oprindelsesland:	Kina
Plug and play:	Ja
Kapabilitet:	PowerPoint, Keynote, Prezi
Laser klasse:	2M
Præsentationsfunktioner:	Laserpointer
Laserpen farve:	Rød
Bølgelængde område:	0 - 650 nm
Laserbølgeeffekt:	1 mW