Techno Line WM 5300 Manual

Techno Line Vejrstation WM 5300

Læs gratis den danske manual til Techno Line WM 5300 (3 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Techno Line WM 5300, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
7
KSPO:
NIL DV229NL & TS21 MANUAL (ENG)
SIZE: W105 X H148 (mm)
BY Lai HZ 21/12/12
Remote Thermo-Hygrometer
Main Unit
Meteotime Weather Station
with
Wireless Thermo-Hygrometer
DAY/NIGHT
MEM
CHANNEL
SET
TEST
2
In/Outdoor Temperature/
Humidity.
Information Window.
Today Weather Information
including Wind Speed, Wind
Direction, and the probability
of Rain/Snow/Hail, Day &
Night Temperature, Day &
Night Weather Status.
Tomorrow, One-Day-After,
and Two-Day-After Weather
Information including Day &
Night Temperature, Day &
Night Weather Status.
WM5300
three days for 470 cities
• 3 channel outdoor 433Mhz wireless Thermo-hygrometer (channel 1 sensor is included,
additional sensors are required for channels 2 and 3)
• Indoor Thermo-hygrometer
• Maximum and minimum memories of temperature and humidity readings
• Temperature and humidity trends (UP/ FLAT/ DOWN),
• Temperature unit in degree C only.
• Regional Day-time temperature and Night-time Temperature information
• 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch /Swedish/ Deutsch)
• Critical Weather Alert
• Maximum of 5 cities’ weather information can be selected and displayed
• Personalized a place name / city.
• Radio-controlled Clock and Calendar (24 hours format only)
• Time-zone setting
• Dual alarm (weekday alarm/single alarm, Alarm sound for 2 minutes)
• Pre- alarm (Programmable) for outdoor sensor – Channel 1 only.
• Battery Low Indicator for Main Unit and Wireless Sensor
• Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor
Alarm Time
DATE Weekday alarm “OFF W-ALM”
Single alarm “OFF S-ALM” Pre-alarm “OFF P-ALM”
Exit to city display mode
• Read critical weather information one by one.
• Turn ON the alarm
• Press and hold for 3 seconds to enforce a radio controlled clock DCF signal search
• Switch to next day’s weather information
• Turn OFF the alarm
• Press and hold for 3 seconds to enforce a wireless RF signal search from remote sensor
• Switch to read outdoor temperature and humidity readings of channels 1, 2 and 3
• Press and hold for 3 seconds to enter into the auto-circulation display mode
• SCAN A: the signal strength will be represented from 0 (very bad) to 9 (very good).
• You are able to press [SET] to switch from the display of the City to date, weekday alarm,
single alarm and pre-alarm.
DATE ALARM
temperature and humidity readings in record
[DAY/NIGHT]
[DAY/NIGHT]
[DAY/NIGHT]
DAY/NIGHT
UP [ ]▲
UP [ ]▲
UP [ ]▲
UP [ ]▲
WEATHER
WEATHER
WEATHER
DATE WEEKDAY ALARM
SINGLE ALARM PRE-ALARM.
WEATHER STATUS
There are total 15 weather status for Day and 15 weather status for Night.
REMOTE SENSORS STATUS
The wave icon above the current channel icon shows the connection status of the corresponding
remote sensor:
Icon Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals received for over 1 hour
SEARCH FOR REMOTE SENSORS
- The main unit can be manually activated to search for the signals from remote sensors by
pressing and holding button.DOWN ( )▼
VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY
Static Display:
- Press [ ] keys to select measurements from different remote sensors, each is CHANNEL
mode to a unique channel 1,2, or 3
Channel Auto-Scan Display:
- Press To enable an automatic scan of all channels, press and hold , until the [CHANNEL]
icon is displayed. The measurements from each remote channel will be alternately displayed
with a 5 seconds viewing.
NOTE: are more than one the channel auto-scan feature can be actived only if there remote
sensors operating and are set to different channels.
MAXIMUM AND MINIMUM TEMPERATURES
- The maximum and minimum recorded indoor and outdoor temperatures and humidity will be
automatically stored in the memory of the main unit. To display them, press button [MEM]
and the respective indicators, or [MAX] [MIN] will be displayed.
- To clear the memory, hold button for 3 seconds. The maximum and minimum [MEM]
temperature records will be erased.
flashing
flashing
SWITCH TO NEXT DAY’S WEATHER INFORMATION
For each press of the UP [ ] button, the user can switch and view the weather information ▲
from today to tomorrow, one-day-after and two-day-after.
Today’s weather
information:
Tomorrow’s weather
information:
One-day-after’s
weather information:
Two-day-after’s
weather information:
61

Produkt Specifikationer

Mærke: Techno Line
Kategori: Vejrstation
Model: WM 5300

Har du brug for hjælp?

Hvis du har brug for hjælp til Techno Line WM 5300 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vejrstation Techno Line Manualer

Techno Line

Techno Line WS 9130 Manual

3 August 2025
Techno Line

Techno Line WS 9215 Manual

3 August 2025
Techno Line

Techno Line WS 9490 Manual

2 August 2025
Techno Line

Techno Line WS 9750 Manual

2 August 2025
Techno Line

Techno Line MA 10860 Manual

2 August 2025
Techno Line

Techno Line WS 6441 Manual

2 August 2025
Techno Line

Techno Line WS 9136 Manual

2 August 2025
Techno Line

Techno Line WS 9910 Manual

1 August 2025
Techno Line

Techno Line WS 6832 Manual

1 August 2025
Techno Line

Techno Line WL1025 Manual

1 August 2025

Vejrstation Manualer

Nyeste Vejrstation Manualer

Hyundai

Hyundai WS 2303 Manual

10 August 2025
TFA

TFA 30.3039 Manual

8 August 2025
TFA

TFA Linea Plus 35.1144.01 Manual

7 August 2025
TFA

TFA 98.1111.02 Manual

7 August 2025
TFA

TFA 30.3900.02 Manual

7 August 2025
TFA

TFA View 35.1142 Manual

7 August 2025
Brandson

Brandson 307346 Manual

5 August 2025
Theben

Theben LUXORliving M140 Manual

3 August 2025
Theben

Theben Meteodata 140 S Manual

3 August 2025
Theben

Theben LUXORliving M130 Manual

2 August 2025