Technoline WT 435 Manual


Læs gratis den danske manual til Technoline WT 435 (3 sider) i kategorien Vækkeur. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Technoline WT 435, eller vil du spørge andre brugere om produktet?

Side 1/3
WT 435 – Digital Clock with Words
Features:
1. Time and date displayed in digits.
2. Time displayed in words (German/English).
Keys:
1. MODE
2. +
3. -
Power Supply:
1. 2 x AAA batteries
2. 4.5V/230V AC/DC adapter
Quick Setup:
Use of adapter:
Insert the AC/DC adapter to any 230 AC household outlet. Then insert the DC jack to the
back case of your unit. The display is lighted all the time while using the adapter!
Use of batteries:
Slide down the battery cover at the back of your clock, then insert 2 x AAA batteries to the
battery compartment, according to +/- polarity. Then replace the battery cover.
While using batteries, the display will only have light for 5 seconds after starting and
while pressing any button on the clock!
LCD Display:
Function of Keys:
1. MODE
1Press MODE for 3 seconds to enter into time and date setting mode and to confirm each
section of the setting mode.
2On normal mode, press MODE to switch between digits mode and languages
(German/English) mode.
2. +
1On setting mode, press + to increase time or date.
3. -
1On setting mode, press – to decrease time or date.
Time Display:
1. Time in digits displays exact hour and minute, and will change every minute.
2. Time in languages (German/English) changes every 5 minutes, that means it will
only display 00:05, 00:10, 00:15……23:55, 24:00 in words. For example, it displays
7:55 in words when it is between 7:53-7:57, and will change to 8:00 in words when it
is between 7:58-8:02.
Time and Date Setting:
1. Press MODE for 3 seconds to enter into time and date setting mode. The hour value
of the time display flashes.
2. Press the + or – button to set the desired value.
3. Confirm your setting by pressing the MODE button. The minute indicator of the time
display blinks.
4. Press the + or – button to set the desired value.
5. Confirm your setting by pressing the MODE button. The day indicator flashes in the
date display.
6. Press the + or – button to set the desired value.
7. Confirm your setting by pressing the MODE button. The month indicator flashes in
the date display.
8. Press the + or – button to set the desired value.
9. Confirm your setting by pressing the MODE button. The year indicator flashes in the
date display.
10. Press the + or – button to set the desired value.
11. Confirm your setting by pressing the MODE button.
Trouble Shooting:
If your clock displays irrelevant time or does not function properly, which may be caused by
electro-static discharge or other interference, unplug the DC jack to disconnect the AC
power and remove the batteries. The clock will be reset to default settings and you need to
set it again.
Care of your LCD Clock:
1. Do not expose the unit to extreme temperature, water or direct sunlight
2. Avoid contact with any corrosive materials
3. Do not subject the unit to excessive force, dust or humidity
4. Do not open the inner back case or tamper with any components of this unit
5. Only use the original AC/DC adapter with correct specifications or voltage


Produkt Specifikationer

Mærke: Technoline
Kategori: Vækkeur
Model: WT 435
Type: Kvarts bordur
Bredde: 155 mm
Dybde: 34 mm
Højde: 42 mm
Antal pr. pakke: 1 stk
Produktfarve: Sort
Produkttype: Bord
Formfaktor: Rektangulær
Kalender: Ja
Batterier inkluderet: Ingen
Batteritype: AAA LR03
Antal understøttede batterier: 2
Understøttet placering: Bord

Har du brug for hjælp?

Hvis du har brug for hjælp til Technoline WT 435 stil et spørgsmål nedenfor, og andre brugere vil svare dig