Teka TR 831 HZ Manual

Teka Ovn TR 831 HZ

Læs gratis den danske manual til Teka TR 831 HZ (6 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Teka TR 831 HZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Safety warnings:

If the ceramic

glass breaks or

cracks, immediately

unplug the stovetop

to avoid electric

shocks.

This appliance is

not designed to work

with an external timer

(not built into the

appliance) or a sepa-

rate remote control

system.

Do not steam

clean this device.

The device and

its accessible parts

may heat up during

operation. Avoid tou-

ching the heating ele-

ments. Children youn-

ger than 8 years old

must stay away from

the stovetop unless

they are permanently

supervised.

This device may

solely be used by chil-

dren 8 years old or

older, people with

impaired physical,

sensory or mental abi-

lities, or those who

lack experience and

knowledge, ONLY

when supervised or if

they have been given

adequate instruction

on the use of the devi-

ce and understand the

dangers its use invol-

ves. User cleaning

and maintenance may

not be done by unsu-

pervised children.

Children must

not play with the devi-

ce.

Precaution. It is

dangerous to cook

with fat or oil without

being present, as

these may catch fire.

Never try to extin-

guish a fire with

water! in this event

disconnect the device

and cover the flames

with a lid, a plate or a

blanket.

Do not store any

object on the cooking

areas of the stovetop.

Prevent a possible fire

hazard.

Installation

Emplacement with cutlery drawer

If you wish to install furniture or a

cutlery drawer under the stovetop, a

separation board must be fitted betwe-

en the two. Accidental contact with the

hot surface of the device's housing is

thus prevented.

The board must be fitted 20 mm bene-

ath the under part of the stovetop.

Electrical connection

Before you connect the stovetop to the

mains, check that the voltage and fre-

quency match those specified on the

stovetop nameplate, which is underne-

ath it, and on the Guarantee Sheet, or

if applicable on the technical data

sheet, which you must keep together

with this manual throughout the pro-

duct's service life.

The electrical connection will be via an

all-pole circuit breaker

or plug, whenever accessible, in

accordance with the current and with a

minimum 3 mm distance between con-

Green-Yellow

Blue

Brown

Grey

Black

Don’t use L3

fig. 1

Green-Yellow

Blue

Grey

Brown

Black

tacts. This ensures disconnection in

emergencies and allows stovetop clea-

ning.

Only the TEKA official technical servi-

ce can handle or repair the appliance,

including replacement of the power

cable.

Ensure that the inlet cable does not

come into contact with the stovetop

housing or the oven housing, if it is ins-

talled in the same unit.

Warning:

The electrical connection

must be properly grounded, follo-

wing current regulations, otherwise

the stovetop may malfunction.

Unusually high power surges

can damage the control system (like

with any electrical appliance).

Keep the Guarantee Certifica-

te or the technical data sheet toge-

ther with the instructions manual

throughout the product's service

life. These contain important techni-

cal information.

Use and Mainte-

nance

Instructions for Using the

Touch Control

CONTROLS (fig 2)

On/off touch key.

Hot plate selection touch keys.

Power and/or residual heat dis-

plays.

“Decrease” power/time touch key.

“Increase” power/time touch key.

Double/triple burner selection touch

button (double or triple burner hot

plate).

Timer/stopwatch touch button.

Clock display.

Stop function touch button.

Hot plate double burner switched on

display (only next to double burner

hot plates). There are two displays in

three burner hot plates, one for each

additional burner.

Timed hot plate display.

Decimal point on displays:

Lit up: Hot plate can be operated.

Not lit up: Hot plate locked.

Countdown stopwatch display.

* Only visible while running.

The touch buttons activate the con-

trols, and each is linked to a display.

You do not need to exert force on the

touch button, you only need to touch it

with the tip of your fingertip to activate

the function.

Each action is verified by a beep.

SWITCHING THE APPLIANCE ON

1Press the on touch button (1) for

at least one second.

The touch control is activated and all of

the power displays (3) show a and0

the decimal point (12) flashes.

If you do not take any action in the next

10 seconds the touch control will

switch off automatically.

SWITCHING SELECTED HOT PLA-

TES ON

Once the touch control is activated

using the touch button (1), you can

switch on the selected hot plates.

1Press the touch button for the cho-

sen hot plate (2). A 0(3) appears on

the power display and the decimal

point (12) lights up, showing that

the hot plate has been selected

(ready to be used).

2Using touch button or (5/4),

choose the power level.

If you do not press the power touch

button within 10 seconds after you

have selected the hot plate, it will be

deactivated and you will have to select

it again.

The touch buttons and are

repetitive. If you keep them pressed

down they increase or decrease with a

0.5 second interval.

Only one hot plate can be selected at

the same time (2), in other words, it will

only show one decimal point (12).

Warning: To operate a hot

plate, it must be selected first.

When you can to operate a hot

plate, check that its decimal point

(12) is lit up.

Quick switch-on at maximum

power: Once you have selected the

hot plate, press the touch button

(4) once. The hot plate will be activa-

ted at full power.

SWITCHING THE HOT PLATE OFF

1The hot plate must be selected first.

Its decimal point (12) must be lit up.

2 Using the touch button (4), lower

the power to . The hot plate will0

switch off automatically.

Quick switch-off: When you press the

touch buttons and (5/4) simulta-

neously, the hot plate will switch off

quickly.

RESIDUAL HEAT DISPLAY

The power display will display an H

when the glass surface reaches a tem-

perature that could cause burning.

When this risk disappears, the display

switches off (if the appliance is discon-

nected), or displays a 0 (if the applian-

ce is still connected).

Switch the hot plate off before the coo-

king time ends to make the most of the

residual heat and save on electricity.

Warning: If while the H is still

displayed there is a power cut and

the power returns immediately, the

residual heat displays will not light

up again, even though the cooking

surfaces are still hot. Bear this in

mind.

fig. 2

Produkt Specifikationer

Mærke:	Teka
Kategori:	Ovn
Model:	TR 831 HZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Teka TR 831 HZ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ovn Teka Manualer

Teka HSB 6350 Manual

5 September 2025

Teka HSB 6456 Manual

14 August 2025

Teka HSB 6466 P Manual

14 August 2025

Teka HSB 6460 P Manual

12 August 2025

Teka HSB 6466 Manual

12 August 2025

Teka HCB 6525 SS Manual

26 Juli 2025

Teka HLB 8400 WH Manual

26 Juli 2025

Teka HSC 644 C SS Manual

26 Juli 2025

Teka HLC 8406 BK AirFry Manual

25 Juli 2025

Teka HLB 8417 Manual

25 Juli 2025

Ovn Manualer

Nyeste Ovn Manualer

Schock SFN54BKN Manual

14 September 2025

Belling BMR60DOINDB Manual

14 September 2025

Schock Silver F609 Manual

14 September 2025

Belling BMR60DODFW Manual

14 September 2025

Belling BFS60SCCER Manual

14 September 2025

Belling BMR60DODFB Manual

14 September 2025

Belling BI70MLPG Manual

14 September 2025

Belling BFS54DOGG Manual

14 September 2025

Belling BRD1100DFRE Manual

13 September 2025

Belling BEL BI602MM Manual

13 September 2025