Tennsco 1480 Manual

Tennsco Ikke kategoriseret 1480

Læs gratis den danske manual til Tennsco 1480 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 65 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 33 anmeldelser. Har du et spørgsmål om Tennsco 1480, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
PK-1740212
Congratulations on your purchase of a
Tennsco Storage Cabinet! Tennsco's 1480 units
are general purpose storage cabinets that
provide a level of quality you won't find
elsewhere. They provide secure storage for
office supplies, books, records, small parts,
tools, etc.
adjustable shelves, a locking chrome handle
with two keys, and a three-point locking system
for extra security.
Tennsco's cabinets are constructed from top
quality 22 to 24 gauge steel, with 22 gauge
steel shelves, offering weight capacities of up to
200 lbs. per shelf (evenly distributed). Our
attractive and durable powder-coated paint
finish will provide for years of service.
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must
be taken when handling various pieces to avoid
injury. For safety, wear a pair of work gloves when
assembling or performing any maintenance on
your cabinet.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1740212
Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000
TENNSCO STORAGE CABINET
Model 1480
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT
SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
(615) 446-8000 or (866) 446-8686 (toll free)
Website: www.tennsco.com E-mail: Info@tennsco.com
Tools Needed: A free
11
/32" nut driver is provided with each Tennsco cabinet (Ref. No. 17). In addition,
you will need a flathead screwdriver. A hammer is required to install the hinge pin and lock bar.
Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.
INSTALLATION OF 1480 CABINETS
1. The reference numbers used throughout this
sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as
they are mentioned.
2. Place the cabinet back (Ref. No. 1) on a
protected surface to prevent
scratching the paint. The
flange on the
bottom of
the back
should be facing
upward.
4. Attach the right side (Ref. No. 3) to the back in
the same manner as you did in step 3,
again making sure that
the flange is around the
back and that the lances
on the
shelf adjustment
strips are
p o i n t e d
in the
s a m e
direction as
those on the back
and left side.
6. Insert bolts into the outside
holes on the header (Ref.
No. 5), placing two on each end
as shown in Inset A. Attach
the nuts, but do not tighten. Next, insert
the loose bolt heads on the
header into the large
end of the
keyhole
slots
at the
top of
each
side panel.
Slide the bolt
heads securely into the
smaller end
of the keyhole slot, and tighten the
four nuts securely.
7. Attach the sill (Ref. No. 6) to the two holes on
each side of the cabinet bottom, using the same
technique you used to attach
the header in step 6.
Flange faces upward
3. Attach the left side (Ref. No. 2) to the back by
placing flange (A) around the back and
bolting the back and
side together with
seven bolts
and nuts
(Ref.
Nos.
18 &19).
Be sure
that the lances
on all shelf
adjustment
strips (B) point
in the same
direction.
Flange goes
under back
B
A
5. To help hold the sides in position, insert one
shelf (Ref. No. 4) into the approximate center of
the unit, inserting the shelf edges into the
lances on all
four shelf
adjustment strips.
Be sure that the
channeled edge of
the shelf
is toward
the cabinet
front. If
a lance
is too
tight, it
may be
helpful to use
a screwdriver to
SLIGHTLY pry it open.
Two bolts
and nuts on
each side
All lances point UP
on both back
and side.
Inset A
Inset B
Loosely place
two bolts and
nuts on each
side, then
slide into
keyhole slots
and secure.
Inset A
Place bolt heads into
keyhole slots, slide to
narrow end, and
secure nuts.

Produkt Specifikationer

Mærke: Tennsco
Kategori: Ikke kategoriseret
Model: 1480

Har du brug for hjælp?

Hvis du har brug for hjælp til Tennsco 1480 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Tennsco Manualer

Tennsco

Tennsco J1878SU Manual

12 Juni 2025
Tennsco

Tennsco 1480 Manual

6 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Philips

Philips TD5101X Manual

15 August 2025
Philips

Philips AWP1721 Manual

15 August 2025
Candy

Candy CWVB6B Manual

15 August 2025
Philips

Philips ED8DVDRW Manual

15 August 2025
Sauermann

Sauermann Si-60 Manual

15 August 2025
Philips

Philips ES8DVDRX Manual

15 August 2025
Philips

Philips TD5101I Manual

15 August 2025
Philips

Philips GoSure TE60x Manual

15 August 2025
Adj

Adj FS600LED Manual

15 August 2025
Philips

Philips GoSure TE50i Manual

15 August 2025