Thames & Kosmos Structural Engineering: Bridges & Skyscrapers Manual

Thames & Kosmos Ikke kategoriseret Structural Engineering: Bridges & Skyscrapers

Læs gratis den danske manual til Thames & Kosmos Structural Engineering: Bridges & Skyscrapers (48 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Thames & Kosmos Structural Engineering: Bridges & Skyscrapers, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/48

EXPERIMENT MANUAL

Franckh-Kosmos Verlags-GmbH & Co. KG, Pfizerstr. 5-7, 70184 Stuttgart, Germany | +49 (0) 711 2191-0 | www.kosmos.de

Thames & Kosmos, 301 Friendship St., Providence, RI, 02903, USA | 1-800-587-2872 | www.thamesandkosmos.com

Thames & Kosmos UK LP, 20 Stone Street, Cranbrook, Kent, TN17 3HE , UK | 01580 713000 | www.thamesandkosmos.co.uk

› › › IMPORTANT INFORMATION

Safety Information

Warning! Not suitable for children under 3 years. Choking hazard

— small parts may be swallowed or inhaled. Strangulation

hazard — long cords may become wrapped around the neck.

Store the experiment material and assembled models out of the

reach of small children.

Keep packaging and instructions as they contain important

information.

Assembly Tips

Dear Parents and Supervising

Adults,

Before starting the experiments, read through the instruction

manual together with your child and discuss the safety

information. Check to make sure the models have been

assembled correctly. Assist your child with the experiments,

especially with reading the assembly diagrams and putting

pieces together that may require more dexterity or hand

strength than the child currently possesses.

We hope you and your child have a lot of fun with the

experiments!

String connectors

Some of the models in this kit use string connectors to connect the

strings to the other parts. These diagrams show you five different

ways to insert the strings into the string connectors.

Anchor pins and connectors

Take a careful look at the different assembly components. Red

anchor pins, blue anchor pins, and joint pins all look pretty

similar at first glance. When you assemble the models, it’s

important to use the right ones. The blue anchor pins are shorter

than the red ones. The joint pins allow the parts to rotate.

Axle rods

The building system contains axles of various lengths. In this

kit, these axles are used as rods. Axle rods can be connected to

the other rods and to each other using the axle rod connectors.

When assembling a model, always be sure that you’re using the

right axle rod and that the axle rod connector is oriented the

correct way on the axle rod.

Anchor pin lever

When you want to take your model apart again, you will need

the anchor pin lever. Use the narrow end of the lever to remove

the anchor pins. You can use the wide end to pry apart other

parts.

Pull the string into the notch.

Pull the string into the notches.

Loop the string through and around

the connector and into the notches.

Pull the string into the notches.

Loop the string through

the holes in the connector.

Produkt Specifikationer

Mærke:	Thames & Kosmos
Kategori:	Ikke kategoriseret
Model:	Structural Engineering: Bridges & Skyscrapers

Har du brug for hjælp?

Hvis du har brug for hjælp til Thames & Kosmos Structural Engineering: Bridges & Skyscrapers stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her