Thermalright HR-03 GT Manual

Thermalright Ikke kategoriseret HR-03 GT

Læs gratis den danske manual til Thermalright HR-03 GT (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Thermalright HR-03 GT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

The Ultimate Cooling Solutions !

www.thermalright.com

HR-03 GT Heatsink

Screw Cap

HR-03 GT

Heatsink

Ram SinkD

Ram Sink A

Mounting

Bracket

Washer

2 3

4 5

6 7

Ram Sink B

8800GT Video Card

Ram Sink C

TYPE 2TYPE 1

Cross-shaped

Cushion Pad

Cross-shaped Backplate

Screw

Heatsink Base

GPU of Video Card

Installation

Component

Exploded View

Important! Before proceeding with installation, please check for the most up-to-date

instructions at www.thermalright.com

There are two types of installation method. Please choose the best one to fit your

system setup and configuration. Type 1 and Type 2 methods share the same Step 1.

Step 1 : Thermal Paste and RAM sinks Application

Remove stock cooler and thorough clean the surface of GPU and RAM

chipsets, making sure oily residue is removed completely. Apply a thin

layer of thermal paste to heatsink base and GPU. Unpeel the backing

of the RAM sinks (A, B, C and D) and stick them to the appropriate

RAM chipsets (see illustration on the right for reference).

Step 2: Backplate Installation

Apply the adhesive padding to

the cross-shaped backplate.

Insert the screws through the

holes from the backplate and

then screw them in to secure in

place. Then insert the washers

from the other side and through

the thread. Finally, insert the

threads through the mounting

holes from the back of the

video card.

Step 3: Heatsink Installation

Slide the heatsink in the

direction depicted by the

arrow from the illustration

with the video card in

between the heatpipes

and the heatsink base.

Step 4: Mounting Bracket Installation

Have the heatsink base in

full contact with the GPU.

Have the mounting bracket

slide through the threads

from the screws and place

it firmly on the heatsink

base.

Step 5: Installation Complete

Use the four screw caps on the

exposed threads and turn till finger

tight to secure heatsink in place.

Installation complete.

Step 2: Moutning Bracket

Installation

Insert screws though the holes

on the mounting bracket and

place the mounting bracket on

top of the heatsink base.

Step 3: Heatsink Installation

Place the heatsink on top of GPU

making sure of a full contact.

Step 4: Backplate Installation

Insert the washers through the

threads on the backside of the

video card and then the cross-

shaped backplate with the

adhesive padding on it.

Step 5: Installation Complete

Use the four screw caps on the

exposed threads and turn till

finger tight to secure heatsink in

place. Installation complete.

Fan Installation

Insert each end of fan wire clip into the holes on the fin (See

illustration for reference). Place any 92 x 25mm fan on top of

heatsink. Pull on fan wire clip to hook into fan mounting holes.

Fan installation complete.

Parts Name Piece(s)

HR-03 GT Heatsink

RAM Sink A

RAM Sink B

RAM Sink C

RAM Sink D

Bracket Mount

Cross-shaped Backplate

Cross-shaped Cushion Pad

Fan Wire Clip

Screws

Washer

Thermal Paste

Nut/Screw Cap 4

Produkt Specifikationer

Mærke:	Thermalright
Kategori:	Ikke kategoriseret
Model:	HR-03 GT
Type:	Køleplade/køler
Vægt:	410 g
Produktfarve:	Sølv
Dimensioner (BxDxH):	126 x 159 x 51 mm
Materiale:	Aluminium