Tiptop Audio MODEL 258T Manual

Tiptop Audio Tastatur MODEL 258T

Læs gratis den danske manual til Tiptop Audio MODEL 258T (1 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Tiptop Audio MODEL 258T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

BUCHLA & TIPTOP AUDIO

DUAL OSCILLATOR MODEL 258

5cps 20kc

DUAL OSCILLATOR - MODEL 258t

Text from the Buchla 200 series catalogue from the 70's. Slight adjustments were made.

Processing input:

The processing control attenuverter

input permits control of pitch

scaling/inversion/expansion without

the need for a separate external

processor.

1V/Oct input:

Control Voltage input for 1V/oct

note tracking.

Frequency modulation control:

For adjusting vibrato depth or

creating clangorous or bell-like

tones, rich in non-harmonic upper

partials.

Oscillator frequency control:

Spans the audio spectrum of 5 Hz to

20 kHz with no range switching.

(The original graphic 5cps to 20kc

was only intended and noted to be

approximate.)

Processing control:

Used to set desired range of incoming

control voltage for expansion,

compression and inversion.

Waveshape control input:

Waveshapes can be varied from

sine to saw (OSC 1) and sine to

square (OSC 2). Voltage control of

waveshape enables powerful

dynamic control of timbre.

Two independent voltage-controlled oscillators. Each has one processing input, a frequency modulation input and a 1V/oct input.

Waveshapes, as well as frequency, can be voltage controlled. Model 258 oscillators feature low sine wave harmonic content,

negligible settling error, and high short and long-term stability, even with rapidly changing ambient temperatures.

TRIMMERS:

There are three trimmers for each oscillator on the back of the module:

1V/oct is the octave tracking trimmer and is set at the factory using high precision instruments.

SHAPE is the trimmer that set the sine wave, for the lower harmonic content of the sine wave.

VC WAVE SHAPE sets the response of the waveshaper to the incoming control voltage. Both SHAPE and VC WAVE SHAPE

trimmers are used to adjust the sine wave purity.

Eurorack 200 series

Size: 18HP - Depth: 45mm - Power: +12V 70mA / -12V 40mA

Produkt Specifikationer

Mærke:	Tiptop Audio
Kategori:	Tastatur
Model:	MODEL 258T

Har du brug for hjælp?

Hvis du har brug for hjælp til Tiptop Audio MODEL 258T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tastatur Tiptop Audio Manualer

Tiptop Audio Control Path Manual

7 Juli 2025

Tiptop Audio QART-QNTZ Manual

4 April 2025

Tiptop Audio SD808 Manual

4 April 2025

Tiptop Audio Happy Ending Kit Manual

4 April 2025

Tiptop Audio Z-PASSIVE Manual

4 April 2025

Tiptop Audio MODEL 258T Manual

4 April 2025

Tiptop Audio 257t Manual

30 Marts 2025

Tiptop Audio 245t Manual

30 Marts 2025

Tiptop Audio 266T Manual

28 Marts 2025

Tiptop Audio 292t Manual

28 Marts 2025

Tastatur Manualer

Nyeste Tastatur Manualer

Intellijel Mult 1U Manual

7 Juli 2025

Roland LX-5 Manual

7 Juli 2025

Modal Electronics Carbon8 Manual

7 Juli 2025

Roland LX-9 Manual

7 Juli 2025

Intellijel CVX 1U Manual

7 Juli 2025

Crestron ZUMMESH-KP10ABATT Manual

7 Juli 2025

Asus ROG Falchion RX Low Profile Manual

7 Juli 2025

Crestron ZUMMESH-KP10DBATT Manual

6 Juli 2025

Crestron ZUMMESH-KP10BBATT Manual

6 Juli 2025

Trust Ody II Wireless 25465 Manual

6 Juli 2025