TOA SP-301 Manual

TOA Højtalerbeslag SP-301

Læs gratis den danske manual til TOA SP-301 (4 sider) i kategorien Højtalerbeslag. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om TOA SP-301, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
INSTALLATION MANUAL
SP-131
SP-201
SP-301
Thank you for purchasing TOA's Speaker Mount Bracket.
Please carefully follow the instructions in this manual to ensure long,
trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and causing personal injury and/or property damage.
• Do not useother methods than specied to mountthe unit. Extreme force is applied to the unitand the
speaker could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the wall's structure and composition. Failure to do so may cause
the speaker to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the unit has no loose joints after installation to prevent
accidents that could result in personal injury.
• Donotmounttheunitinlocationsexposedtoconstantvibration.Theunitcanbedamagedbyexcessive
vibration,potentiallycausingthespeakertofall,whichcouldresultinpersonalinjury.
• Do not use anti-rust lubricant. If it contacts resin or rubber parts, they could deteriorate and cause the unit to
fall, possibly resulting in personal injury.
SPEAKER MOUNT BRACKETS
When Installing the Unit
• Avoidtouchingtheunit'ssharpmetaledgetopreventinjury.
When the Unit is in Use
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Havetheunitcheckedperiodicallybytheshopfromwhereitwaspurchased.Failuretodosomayresultin
corrosion or damage to the unit that could cause the unit to fall, possibly causing personal injury.
2. GENERAL DESCRIPTION
These Speaker Mount Brackets are designed to mount horn speakers or wide range speakers to walls or poles.
Pole mounting of the speaker requires addition of the optional YS-60B Pole Band.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
3. COMPONENT PARTS
4. INSTALLATION
4.1. SP-131 (Designed for pole mounting)
Quantity
SP-131* SP-201 SP-301
2
- -
-
1
-
- -
1
422
422
844
422
422
422
844
422
No.
1
2
3
4
5
6
7
8
9
10
11
Part name
SP-131 pole bracket
SP-201 base bracket
SP-301 base bracket
Hexagon bolt M8 x 20
Nut (for M8)
Plain washer (for M8)
Spring washer (for M8)
Hexagon bolt M10 x 25
Nut (for M10)
Plain washer (for M10)
Spring washer (for M10)
1
2
3
4
5
6
7
8
9
10
11
* The SP-131 contains 2 sets of brackets.
Step 1. Attach the SP-131 pole bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Mount the SP-131 pole bracket to
the pole by using the YS-60B Pole
Band.
Note
The YS-60B permits speaker mounting to
a pole of 9 to 34 cm in diameter.
Example of mounting reinforcement
If the installation location is susceptible to
vibrations or strong wind, use the SP-131 in
combination with 2 YS-60Bs to reinforce the
mounting strength as shown below.
SP-131 pole bracket YS-60B (option)
Reinforcing plate
Note: Separately prepare the one with 5 mm or
more in thickness.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-131 pole bracket
Hexagon bolt
SP-131 pole bracket
YS-60B (option)

Produkt Specifikationer

Mærke: TOA
Kategori: Højtalerbeslag
Model: SP-301

Har du brug for hjælp?

Hvis du har brug for hjælp til TOA SP-301 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtalerbeslag TOA Manualer

TOA

TOA SP-301 Manual

21 Juni 2025

Højtalerbeslag Manualer

Nyeste Højtalerbeslag Manualer

Vaydeer

Vaydeer YX1021 Manual

23 Juni 2025
Sound Bass

Sound Bass ONE Manual

23 Juni 2025
Roadworx

Roadworx Wallmount 1 Manual

23 Juni 2025
Suptek

Suptek SPM201 Manual

22 Juni 2025
Suptek

Suptek S3 Manual

21 Juni 2025
OmniMount

OmniMount 30.0 CA Manual

21 Juni 2025
USX-Mount

USX-Mount SAS008 Manual

20 Juni 2025
Suptek

Suptek SDM001 Manual

20 Juni 2025
HomeMount

HomeMount ST33 Manual

20 Juni 2025
PERLESMITH

PERLESMITH PSSS6 Manual

19 Juni 2025