TOA WM-5265 Manual

TOA Mikrofon WM-5265

Læs gratis den danske manual til TOA WM-5265 (40 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 18 anmeldelser. Har du et spørgsmål om TOA WM-5265, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

Thank you for purchasing TOA's Wireless Microphone.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

WM-5225

WM-5265

WIRELESS MICROPHONES

INSTRUCTION MANUAL

When the Unit is in Use

• To prevent the electromagnetic wave from badly

influencing medical equipment, make sure to

switch off the unit's power when placing it in close

proximity to the medical equipment.

• Use TOA’s BC-5000 Battery Charger when

recharging.

• The wireless microphone can be powered by WB-

2000 Battery. But, if use of any other than the

counter specified battery into the BC-5000 Battery

Charger, it may cause fire, personal injury, or

environmental contamination due to battery rupture

or leakage.

• The use of any other than the specified charger

could result in fire, personal injury, or

environmental contamination due to battery rupture

or leakage.

• Stop charging, if the batteries are not fully charged

within 3 hours. Failure to do so may cause the

batteries to fire, explode, leak, or heat.

• Never short-circuit the charging terminals on the

bottom of the microphone with metal objects. Doing

so could result in electric shocks or burns.

When the Unit is in Use

• When the unit is not in use for 10 days or more, be

sure to take the battery out of the unit because

battery leakage may cause personal injury or

contamination of environment.

• Make sure to observe the following handling

precautions so that a fire or personal injury does

not result from leakage or explosion of the battery.

· Do not short, disassemble, heat nor put the

battery into a fire.

· Never charge batteries of the type which are not

rechargeable.

· Do not solder a battery directly.

· Be sure to use the specified type of battery.

1. SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully before use.

• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages

regarded as very important precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property

damage which could result from mishandling. Before operating your product, read this manual first and

understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

WARNING

CAUTION

· Note correct polarity (positive and negative

orientation) when inserting a battery in the unit.

· Avoid locations exposed to the direct sunlight,

high temperature and high humidity when storing

batteries.

Do not place the dry cell battery into charger.

Placing non-rechargeable batteries in the charger

may cause the battery to crack resulting in a fire

and/or harm to the body.

When recharging, please only use the BC-5000

Battery Charger and WB-2000 Battery.

Do not use other battery types.

When the battery becomes inflated or leaks,

discontinue use and replace with new one

immediately.

If there’s any burning and/or peculiar smell while

charging the battery, please switch off the power

immediately.

CAUTION TO USER: Changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to operate

the equipment.

IMPORTANT NOTE: To comply with the FCC RF

exposure compliance requirements, no change to

the antenna or the device is permitted. Any change

to the antenna or the device could result in the

device exceeding the RF exposure requirements and

void user’s authority to operate the device.

License requirement

The term "IC:" before the radio certification number

only signifies that Industry Canada Technical

specifications were met. Operation is subject to the

following two conditions;

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Le présent appareil est conforme aux CNR

d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil

doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en

compromettre le fonctionnement.

Produkt Specifikationer

Mærke:	TOA
Kategori:	Mikrofon
Model:	WM-5265

Har du brug for hjælp?

Hvis du har brug for hjælp til TOA WM-5265 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon TOA Manualer

26 Juli 2025

28 Januar 2025

15 September 2024

6 September 2024

1 September 2024

1 September 2024

1 September 2024

TOA IR-200BT-2 Manual

31 August 2024

TOA IP-A1MP Manual

31 August 2024

TOA IR-200BC Manual

31 August 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Zoom SSH-6e Manual

31 Juli 2025

Sennheiser Digital 6000 Manual

30 Juli 2025

JLab JBuds Talk Manual

30 Juli 2025

JLab Epic Talk Manual

30 Juli 2025

The T.bone free solo HT 863 Manual

30 Juli 2025

JLab Create Wireless Manual

29 Juli 2025

MIPRO MU-506HS Manual

29 Juli 2025

NUX B-6 Manual

28 Juli 2025

Sennheiser L2021-40L Manual

28 Juli 2025

Sony ECM-CG50 Manual

28 Juli 2025