Topeak JoeBlow Booster Manual

Topeak Pumpe JoeBlow Booster

Læs gratis den danske manual til Topeak JoeBlow Booster (5 sider) i kategorien Pumpe. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Topeak JoeBlow Booster, eller vil du spørge andre brugere om produktet?

Side 1/5
User's Guide
JOEBLOW BOOSTER
GB
HOW TO INFLATE TUBELESS TIRE
NOTE
Engage the valve and turn to
CHARGE mode.
Pump and store air in Air
Chamber.
Pump to 160 psi/ 11 bar
for best results.
160 11 psi / bar
• Please read the instruction before first use.
Follow tire manufacturer's
recommended installation
instructions for tubeless
tires.
Tighten valve and
ensure tubeless tire
has been installed
correctly before
inflation.
If inflation fails, deflate tire and check tire installation, rim and valve. Follow inflation sequence to install and
inflate tire correctly.
1.1 1.2
2STEP 3STEP
DO NOT squeeze tire when
engaging pump head.
CHARGE MODE
Turn to mode then a strong blast of air will inflate the tire at the same time. If INFLATE
the installation is perfect, the bead of tire will snap into the rim as shown during inflation.
4STEP 5STEP
INFLATE MODE
Continue to pump to desired pressure
immediately. Press the Air Release Button
to adjust the pressure as necessary.
SmartHead™ Valve
fits Presta and Schrader
valve
Air Release Button
Air Chamber
Top Mount Gauge +
Mode Selector
Extra Long Hose
1STEP
User's Guide
JOEBLOW BOOSTER
HOW TO INFLATE NORMAL TIRES
WARNING
2-year Warranty: All mechanical components
against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have
your original sales receipt. Items returned
without a sales receipt will assume that the
warranty begins on the date of manufacture.
All warranties will be void if the product is
damaged due to user crash, abuse, system
alteration, modification, or used in any way
not intended as described in this manual.
* The specifications and design are subject
to change without notice.
Please contact your Topeak dealer with
any questions. For USA customer service,
call: 1-800-250-3068
www.topeak.com
WARRANTY
M-TJB-BST-GB 11/15
Copyright © Topeak, Inc. 2015
There are two common reason for
inflation failure.
Tire was not
installed properly.
Valve was not
tightened sufficiently.
1
DO NOT turn Mode Selector to
mid-point between modes. The
pump will not function properly
and the gauge will display "0 psi/
0 bar.
2
To avoid injury, turn Mode
Selector carefully.
RECOMMENDED
OPERATING POSITION
4 5
DO NOT exceed the maximum air pressure of your tubeless tire. Follow tire manufacturer's
recommended installation instructions for tubeless tires.
6
Release air and turn mode selector
to after each use. For INFLATE
safety reasons, DO NOT store
pressurized air in Air Chamber when
not in use.
3
Turn to mode.INFLATE
1STEP
Engage the valve.
2STEP
Pump to desired pressure. Press the Air
Release Button to adjust the pressure
as necessary.
3STEP
GAP
DO NOT squeeze tire when
engaging pump head as it may
separate tire and rim and prevent
a good seal when inflating.


Produkt Specifikationer

Mærke: Topeak
Kategori: Pumpe
Model: JoeBlow Booster

Har du brug for hjælp?

Hvis du har brug for hjælp til Topeak JoeBlow Booster stil et spørgsmål nedenfor, og andre brugere vil svare dig