Toshiba E-Studio 520 Manual

Toshiba Printer E-Studio 520

Læs gratis den danske manual til Toshiba E-Studio 520 (12 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Toshiba E-Studio 520, eller vil du spørge andre brugere om produktet?

Side 1/12
Document
Manager
Operator´s Manual for
Basic Function
Networking Documents.
EPA
E
NERGY
S
TAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the
E
NERGY
S
TAR program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
E
NERGY
S
TAR Partner, the TOSHIBA
TEC CORPORATION has determined that this copier model meets the
E
NERGY
S
TAR guidelines for energy
efficiency.
E
NERGY
S
TAR guidelines for this class of copier require
E
NERGY
S
TAR copiers to have a ‘Sleep Mode’
feature that automatically makes the copier enter the sleep mode after a period of inactivity. The copier must also
automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
e-STUDIO520/600/720/850 Copier model (Base model)
‘Automatic Energy Save’-
The copier consumes less than 205 W (e-STUDIO520)/236 W (e-STUDIO600)/
282 W (e-STUDIO720)/332 W (e-STUDIO850) during Energy Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Off Mode’
The copier consumes less than 20 W (e-STUDIO520/600/720/850).
‘Off Mode’ Default Time-
The default time for the ‘Off Mode’ is 90 minutes.
e-STUDIO520/600/720/850 Copier/Printer + Fax model (Multifunction model)
‘Automatic Energy Save’-
The copier consumes less than 250 W (e-STUDIO520)/281 W (e-STUDIO600)/
327 W (e-STUDIO720)/377 W (e-STUDIO850) during Energy Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Sleep Mode’
The copier consumes less than 95 W (e-STUDIO520/600/720/850) in the ‘Sleep Mode’.
‘Sleep Mode’ Default Time-
The default time for the ‘Sleep Mode’ is 90 minutes.
Note1- The default setting for the ‘Sleep Mode’ andAutomatic Energy Save’ can be changed.
Note2- For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts warming
itself up and prints out the data when it becomes ready. Also, when the start button or the energy saver
button on the control panel is pressed, the copier starts warming itself up.
Note3- If ‘Automatic Energy Save’ and ‘Sleep Mode’ have the same setting time, ‘Sleep Mode’ takes priority.
Note4- For Copier models (Base models), after an automatic shutoff, the weekly timer feature cannot be
activated. If you prefer to activate this feature, contact your authorized Toshiba dealer.
* Note 4 is applied to the regions with power requirements other than 100 V.
In accordance with the EPA
E
NERGY
S
TAR Program guidelines, this copier is suitable for the use of recycled
copier paper (with up to 100% post-consumer content) meeting the requirements as specified in ENV 12281
(paper-printing and business paper-Requirements for copy paper for dry toner imaging processes).
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
E
NERGY
S
TAR is a U.S. registered mark.


Produkt Specifikationer

Mærke: Toshiba
Kategori: Printer
Model: E-Studio 520

Har du brug for hjælp?

Hvis du har brug for hjælp til Toshiba E-Studio 520 stil et spørgsmål nedenfor, og andre brugere vil svare dig