Totolink SW24DM Manual

Totolink Skifte SW24DM

Læs gratis den danske manual til Totolink SW24DM (1 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Totolink SW24DM, eller vil du spørge andre brugere om produktet?

Side 1/1
Checking Package Contents
Before Installation
1* 16/24 ports Ethernet Switch
1* Power Cord
1* Quick Installation Guide
2* Mounting Brackets and the fittings
Quick Installation Guide
Ethernet Switch
SW16,SW16D,SW16DM,
SW24,SW24D,SW24DM
For more information, please go to www.totolink.net
Information in this document is subject to change without prior notice.
Copyright
TOTOLINK., All rights reserved.
Appearance
(Take SW24 & SG24 for Example)
LED Indicators
Working Modes
(Only for SG24
&SG24D)
Link/Act
(1~16 or 1~24)
POWER
LED Indicator
Description
The indicator lights green when powered on
The corresponding indicator lights green when connected
to other device, flashes green during data transfer
Flow Control ON
Flow Control OFFM1
M2
23/24 Ports Aggregation based on MAC sourcesM3
1-22 Port Isolation 23~24 Port Uplink, M4
Note: M3 mode must be used with TOTOLINK products
Hardware Installation Refer to the application scene graph below
Notice
1. The switch should be used indoor only.
2. Use the Power cord comes with the switch.
3. Set the device on a flat surface strong enough to support the entire weight
of the device with all fittings.
4. Dont place heavy objects on the switch.
Use Ethernet cable to connect router to Switch (LAN port to LAN port)
Use Ethernet cable to connect PC or Laptops RJ45 port to Switch
Plug one end of the power cord into switchs AC power jack and then
other end to wall socket.
Ethernet Switch
Router


Produkt Specifikationer

Mærke: Totolink
Kategori: Skifte
Model: SW24DM

Har du brug for hjælp?

Hvis du har brug for hjælp til Totolink SW24DM stil et spørgsmål nedenfor, og andre brugere vil svare dig