TP-Link AX1500 Manual

TP-Link Wifi repeater AX1500

Læs gratis den danske manual til TP-Link AX1500 (2 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om TP-Link AX1500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

7106509340 REV1.2.0

Power On

Quick Installation Guide

Range Extender

Next to

Solid On

Relocate

Set Up

1. Plug in the extender about halfway between your router and the Wi-Fi dead

zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,

relocate the extender closer to the router to achieve better signal quality.

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable,

then enjoy the internet. The password of your extended network is the

same as your host router.

Tip: You can also set up the extender in Access Point mode to transform your existing wired

network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.

Laptop

Smartphone

Tablet

Smart TV

Game Console

Desktop

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

Via the Tether App

1. Get the up-to-date Tether app from the

Apple App Store or Google Play, or simply

scan the QR code.

Via the Tether App

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

Note: If the LED does not turn solid on, please

refer to FAQ > Q2.

2. Launch the Tether app and log in with your

TP-Link ID. If you don’t have an account,

create one first.

Welcome to Tether

TP-Link ID (Email)

Password

3. Tap the button and select Range Extender.

Solid On

Tether

Scan for Tether

Note: If you cannot find your device, please refer to

FAQ > Q1.

For more details, please refer to the user guide at

https://www.tp-link.com/support/download.

More Setup Methods

Via a Web Browser

1. Connect your computer or smartphone to

the extender’s network TP-Link_Extender.

2. Visit http://tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

3. Follow web instructions to complete the setup.

2. Within 2 minutes, press the WPS button on the

extender for 1 second. The LED should

change from blinking to solid on, indicating

successful connection.

1. Press the WPS button on your router.

Via the WPS Button

3. If the extender connects to a dual band router,

repeat steps 1 and 2 to connect to the other

band.

Extended Network Names:

Router’s network name with

EXT

at the end

Same as your OneMesh router

(See back for OneMesh details)

Passwords:

Same as your router

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

* Images may differ from your actual product.

Plug the extender into a power outlet next to your router. Wait until

its Power LED turns solid on.

Note: For safety, only plug the extender in the direction as shown below.

My Devices

No devices found.

Choose your device type

Router

Gaming Router

Range Extender

Tip: To place the extender for optimal Wi-Fi performance, access extender settings

via the Tether app and go to Tools > Location Assistant, or simply scan the QR code

to visit https://www.tp-link.com/support/faq/3103/.

TP-Link OneMesh router and extenders work together to form one unied Wi-Fi

network. Walk through your home and stay connected with the fastest possible

speeds thanks to OneMesh’s seamless coverage.

OneMesh

with Seamless Roaming

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your

home for the fastest possible speeds.

Unied Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password,

access control settings and more.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the

Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code,

or visit https://www.tp-link.com/onemesh/compatibility.

LED Explanation

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the 5GHz

wireless network of your router.

5GHz On/O

The extender is connected or not connected to the 2.4GHz

wireless network of your router.

2.4GHz On/O

The extender is on or o.

The system is starting up or rmware upgrade is in progress.

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it

closer to your router.

WPS connection is in progress.

No wireless connection is established.

(Signal)

Solid blue

Solid red

Blinking

O

(Power)

INTERNET

SAME

Network Name & Password

for seamless roaming

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network

If you are

using a computer, unplug the Ethernet cable if any.

2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and

3. View or change extender settings as needed.

Method 1: Via the Tether App

1. Connect your smartphone to the extender‘s or router’s network.

2. Launch the Tether app, select your extender, and log in.

3. View or change extender settings as needed.

Access Extender Settings

After setup, you can access extender settings via any of the methods below.

You can reselect host network, change extended network settings and more.

Note: If your extender and router use the same network name, Method 1 is recommended.

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

Other...

< Settings

My Devices

Local Device

RExxx

XX-XX-X X-XX-X X-XX

Q1. What should I do if the Tether app cannot nd my device during

setup?

Try another method by following the steps below:

1. Connect your smartphone to the extender’s network TP-Link_Extender.

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after

completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the

conguration. Check the password and try again.

Make sure the extender is close to your router, preferably within 16 feet, and away

from large electrical appliances.

If you have enabled wireless MAC ltering, wireless access control, or access

control list (ACL) on your router, disable them rst, then follow any method on the

front page to complete the conguration.

Try setting it up via the WPS button.

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the RESET button for 1 second.

The extender will reboot.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

For technical support, replacement services, user manuals and other information,

please visit https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs for our product guides, you are welcome

to email techwriter@tp-link.com.cn.

To communicate with TP-Link users or engineers, please join the TP-Link Community

at https://community.tp-link.com.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use this

product with care and operate at your own risk.

RESET

If you need more setup help, please visit

https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

AX1500/AX1750/AX1800/AX3000 Wi-Fi 6 Range Extender Model: RE505X/RE603X/RE605X/RE705X

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Wifi repeater
Model:	AX1500
Type:	Netværksgentager
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	74 mm
Dybde:	46 mm
Højde:	124.8 mm
Brugervejledning:	Ja
Produktfarve:	Hvid
Pakkevægt:	400 g
Pakkedybde:	125 mm
Pakkebredde:	202 mm
Pakkehøjde:	97 mm
Wi-Fi:	Ja
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
Hurtig start guide:	Ja
Pakketype:	Kasse
Forbindelsesteknologi:	Kabel & trådløs
Certificering:	FCC, RoHS
Strømforbrug (maks.):	10 W
Wi-Fi-bånd:	Dual-band (2,4 GHz / 5 GHz)
Bedste Wi-Fi standard:	Wi-Fi 6 (802.11ax)
WLAN dataoverførselshastighed (maks):	1200 Mbit/s
Ethernet LAN-grænsefladetype:	Gigabit Ethernet
Kabelteknologi:	10/100/1000Base-T(X)
Netværksstandarder:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Modtager, følsomhed:	5GHz:\n\n11a 6Mbps: -93dBm, \n11a 54Mbps: -75dBm\n11ac HT20 MCS0: -92dBm, \n11ac HT20 MCS8: -70dBm\n11ac HT40 MCS0: -90dBm, \n11ac HT40 MCS9: -66dBm\n11ac HT80 MCS0: -87dBm, \n11ac HT80 MCS9: -62dBm\n\n2.4GHz:\n\n11g 54Mbps: -77dBm, \n11n HT20 MCS7: -75dBm\n11n HT40 MCS7: -72dBm
DHCP-klient:	Ja
DHCP-server:	Ja
Antennedesign:	Ekstern
Antenner, antal:	2
Webbaseret administration:	Ja
Knap til nulstilling:	Ja
LED-indikatorer:	Power, WAN, WLAN
Harmoniseret systemkode (HS):	85176990
Mac kompabilitet:	Ja
Bæredygtighedscertifikater:	RoHS
Frekvensbånd:	2.4 - 5 GHz
Understøttede Mac-operativsystemer:	Ja
Understøttede Linux-operativsystemer:	Ja
Maksimal dataoverførselshastighed:	1200 Mbit/s
Wi-Fi-datahastighed (maks.):	1300 Mbit/s
Antenne type:	Ekstern
Maksimal overførselsafstand:	- m
Understøttet browser:	Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser
Fuld duplex:	Ja
Auto MDI/MDI-X:	Ja
Dataoverførselshastighed:	1200 Mbit/s
Dynamisk IP:	Ja
Statisk IP:	Ja