TP-Link Festa F65-Outdoor Manual

TP-Link Adgangspunkt Festa F65-Outdoor

Læs gratis den danske manual til TP-Link Festa F65-Outdoor (2 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16 anmeldelser. Har du et spørgsmål om TP-Link Festa F65-Outdoor, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Overview

Package Contents

Panel Layout

Passive PoE Adapter

LED Status Indication

Solid green The device is initializing or working properly.

Flashing yellow System errors. RAM, Flash, Ethernet, WLAN or

rmware may be malfunctioning.

Slowly Flashing yellow, green Firmware update is in progress. Do not disconnect

or power o the device.

Quickly ashing yellow, green The device is being reset to its factory default

settings.

Flashes green twice Initialization is completed.

SYS LED Explanation

Quickly ashing green Locate the device.

Slowly ashing green The device is in an isolated state.

RESET Grounding

Terminal

Ethernet

Port

Power LED PoE Port LAN Port

Waterproof Kit

Seal

(For Unshielded Cable) O-RingBracket

Seal

(For Shielded Cable)

Spiral Cover

Power Cord

Passive PoE Adapter

(Mounting Bracket Included)

Screw

(For Grounding

Wire Securing)

AP Installation Guide

Quick Installation Guide

Setup with videos

Visit https://www.tp-link.com/support/setup-video/ or scan the QR

code to search for the setup video of your product model.

Indo or/Outdoor Access Point

Plastic Wall Anchors Self-tapping ScrewsMounting Bracket

(For AP)

Pole Mounting Strap

Mounting Kit

* Accessories may vary by product.

Note: PoE Adapter may vary by model.

Lightning and ESD Protection

Before mounting the AP, consider Lightning and ESD Protection to ensure

safety.

Proper grounding is extremely important for outdoor devices. To reduce the

damage of potential lightning and ESD attacks, connect the grounding

terminal to grounding facilities using a proper grounding wire, which should

meet the local installation requirements. You need to secure the grounding

wire to the grounding terminal with the screw.

Hardware Installation

Mount the AP

The AP can be pole-mounted or wall-mounted. Follow the steps below

for the appropriate installation.

Option 1: Pole Mounting

Lead the end of the pole mounting strap

through the back of the AP.

Step 1:

Position the AP and wrap the pole

mounting strap around the pole.

Feed the end through the screw-block

and tighten the strap until the AP is

secure.

Step 2:

Option 2: Wall Mounting

Step 1:

Place the mounting bracket for AP in

the right position. Mark positions for

the screw holes .

Drill holes for the screws at the marked

positions.

Step 2:

Insert the plastic wall anchors into the

holes.

Align the mounting bracket to the

plastic wall anchors and drive the

self-tapping screws into the anchors

through the mounting bracket.

Step 3:

Align the mounting tabs on the back of

the AP with the slot of the mounting

bracket.

Push and slide the AP downward until

it locks into place.

Φ 7.6 mm (19/64 in)

Grounded PoE Adapter

Ethernet Cable

Grounded 3-wire

Power Outlet

Indoor/Outdoor Access Point

Note: Festa F65-Outdoor is used as an example throughout the Guide. Images

may dier from your actual product.

Quick Installation Guide

You can congure and manage Festa APs via the Festa Cloud-Based

Controller.

Option 1: Via Web Browser

Switch

Router / Gateway

Festa Cloud

Clients

AP AP AP AP

Option 2: Via Festa App

1. Make sure that your management device can access the internet.

2. Launch a web browser and enter https://festa.tplinkcloud.com in the

address bar. Log in with your TP-Link ID.

3. Click + Add Controller, then you will see you have successfully registered

for a Cloud-Based Controller and the controller has been added to the

controller list.

4. Click , and follow the step-by-step Set Up Now Config New Setup, click

instructions to complete the configuration wizard of the controller.

5. On the controller’s management page, go to Devices + Add , click

Devices, and follow the step-by-step instructions to adopt Festa devices.

Now you can configure and manage Festa devices on the controller.

https://festa.tplinkcloud.com

1. Download and install the Festa App from App Store or Google Play.

2. Launch the Festa App and log in with your TP-Link ID.

3. Tap + on the upper right corner, then you will see you have successfully

registered for a Cloud-Based Controller and the controller has been added

to the controller list.

4. Tap , tap Confirm Let’s Get Started, and follow the step-by-step

instructions to complete the conguration wizard of the controller.

5. On the controller’s management page, go to , click Devices + on the upper

right corner, and follow the step-by-step instructions to adopt Festa

devices.

Now you can configure and manage Festa devices via the Festa App.

Scan for Festa App Festa App

For technical support, the user guide and other information,

please visit https://www.tp-link.com/support/?type=smb, or simply

scan the QR code.

To ask questions, find answers, and communicate with TP-Link users

or engineers, please visit https://community.tp-link.com/business to

join TP-Link Community.

For detailed configurations, refer to the User Guide of the controller. The

guide can be found on the download center of our official website:

https://www.tp-link.com/support/download/?type=smb.

NO SE SI SKPL PT RO UK(NI)

IT LI MT NLLT LU LV

EL FI FR HR HU IEES

BE BG DE DKCH CY CZ

Attention: In EU member states, EFTA countries and Northern Ireland,

the operation in the frequency range 5150MHz-5350MHz is only

permitted indoors.

Attention: In Great Britain, the operation in the frequency range

5150MHz - 5350MHz is only permitted indoors.

For Festa Controller, go to the Devices page and select the desired AP

to specify the channel.

Software Conguration

Safety Information

• Keep the device away from re or hot environments. DO NOT immerse in

water or any other liquid.

• Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Do not use any other chargers than those recommended.

• Do not use damaged charger or USB cable to charge the device.

• Adapter shall be installed near the equipment and shall be easily

accessible.

• Adapter should be used indoors where the ambient temperature is lower

than or equal to 40 ℃.

• Plug the adapter into the wall outlets with earthing connection through the

power supply cord.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC,

2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at

https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca/

Connect the Cable

Fit an Ethernet cable through the Spiral Cover Bracket O-Ring, , and ,

and connect the cable to the port.

Fit the and screw the to O-Ring Bracket to the head of the Bracket

the body of the device.

Note: Don’t warp the O-Ring.

Fit the Ethernet cable through the ’s slit with the Seal thicker side

towards the .Bracket Bracket, and plug the seal to the

Note: Choose the proper Seal according to the type and diameter of

the Ethernet cable.

Screw the Spiral Cover to the Bracket.

Spiral Cover

O-Ring

Bracket

Seal

Power On

The AP can be powered via the passive PoE adapter or a PSE device (such

as a PoE switch) which complies with Power Source Class 2 (PS2) or Limited

Power Source (LPS) of IEC 62368-1.

Option 1: Via Passive PoE Adapter

Connect the PoE Adapter

Connect the AP to a Power over Ethernet (PoE) adapter as follows:

Mount the PoE Adapter (Optional)

Note: To ensure the passive PoE adapter is attached most securely, it is recommended

to install the adapter with the Ethernet port facing upward.

Step 1:

Remove the mounting bracket from the

passive PoE Adapter.

Drill two holes on the wall and insert the

plastic wall anchors into the holes. Secure

the mounting bracket to the wall. Make sure

the shoulders at the corners of the

mounting bracket are on the outside and

pointing upward.

Step 2:

Attach the passive PoE adapter to the

mounting bracket by sliding the adapter in

the direction of the arrows until it locks

into place.

Option 2: Via PoE Switch

Connect an Ethernet cable from the PoE switch to the Ethernet port.

Note: For PoE power supply specications, refer to the product label.

PoE Switch

PoE LAN

Ethernet cable

length up to 100 m

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Adgangspunkt
Model:	Festa F65-Outdoor

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Festa F65-Outdoor stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangspunkt TP-Link Manualer

TP-Link Omada EAP115-Wall Manual

30 December 2025

TP-Link Festa F65-Outdoor Manual

11 December 2024

TP-Link RE6000XD Manual

4 December 2024

TP-Link Festa F65-Wall Manual

3 Oktober 2024

TP-Link EAP110-Outdoor V3 Manual

1 Oktober 2024

TP-Link WBS210 Manual

11 September 2024

TP-Link CAP300 Manual

10 September 2024

TP-Link Archer T2U Manual

10 September 2024

TP-Link Festa F65 Manual

2 September 2024

TP-Link Omada EAP110-Outdoor Manual

2 September 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer

Cudy AP11000 Manual

3 Juni 2025

Planet WDAP-C5100BE Manual

5 April 2025

Peplink AP One AX Manual

20 Marts 2025

Cisco Aironet 3600i Manual

15 Januar 2025

Cisco Aironet 3600e Manual

13 Januar 2025

Luxul P40 Manual

13 Januar 2025

Luxul XAP-1440 Manual

13 Januar 2025

Ubiquiti Networks UniFi AP Flex HD Manual

12 Januar 2025

D-Link DBT-900AP Manual

26 December 2024

D-Link AirPro DWL-6000AP Manual

23 December 2024