TP-Link Festa FS308G Manual

TP-Link Skifte Festa FS308G

Læs gratis den danske manual til TP-Link Festa FS308G (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om TP-Link Festa FS308G, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Festa Smart Switch
LED Explanation
LED
Explanation
PWR On/O: Power on/o
SYS
On (Green): Running at 1000 Mbps
On (Yellow): Running at 10/100 Mbps
Blinking: Transmitting/receiving data
O: No connected device
PoE Status
(For Port 1-4 of Festa FS308GP
/Port 1-8 of Festa FS310GP)
On: Providing PoE power
Blinking: Current-overload/Short-circuit/Connected to a
non-standard PD/Power exceeded the user-dened value
O: Not providing PoE Power
PoE Max
(For Festa FS308GP/
Festa FS310GP)
On: Remaining power supply ≤ 7 W
Blinking: Remaining power supply keeps ≤ 7 W for more than
2 minuites
O: Remaining power supply keeps ＞ 7 W
Blinking: System running normally
On/O: System running abnormally
Speed
SFP1/SFP2
(For Festa FS310GP only)
Green/Yellow On: Running at 1000/100 Mbps
Blinking: Transmitting/receiving data
O: No connected device
For simplicity, we will take Festa FS310GP for example throughout the Guide.
For simplicity, we will take Festa FS308G for example throughout the Guide.
Note:
1. The PoE ports can also connect to non-PoE devices, but only transmit data.
2. The PoE ports shall not be used to charge lithium batteries or devices supplied
by lithium batteries.
3. Maximum PoE power is 30 W for each PoE port, and total PoE budget is 62 W
(for Festa FS308GP) / 61 W (for Festa FS310GP) respectively.
4. PoE budget calculations are based on laboratory testing. Actual PoE power
budget is not guaranteed and will vary as a result of client limitations and
environmental factors.
Note:
1. Port 8 is a PD (Powered Device) port. When powered through port 8, the
switch can only be powered by power supplies that comply with the 802.3af/at
standard and Power Source Class 2 (PS2) or Limited Power Source (LPS)
defined in the standard of IEC 62368-1.
2. The DC power input takes precedence over the PD port. If the DC input fails,
the PoE input on the PD port willl supply power instead.
Connection for Non-PoE Switch
Connection for PoE Switch
DC Power Adapter
AC Power Cord
PoE+ Ports (1-8)
SFP Slots
Router/Gateway
LAN Port
WAN Port
Internet
IP Camera AP IP Phone
Powered Device (PD)
PC
PC
Router/Gateway
LAN Port
WAN Port
Internet
©2024 TP-Link
7106511327 REV1.1.0
Installation
Note: For simplicity, we will take Festa FS310GP for example.
Desktop:
Attach the supplied feet to the bottom of the switch to prevent it from
slipping when placed on a desktop.
Note:
For detailed information, please refer to
the Wall Mounting Guide on the device’s
support page.
Wall-mounting:
Drill two holes on the wall according to the mounting holes on the
bottom of the switch, then secure the switch to the wall with two
suitable screws (not provided).
Switch
Router/Gateway
Festa Cloud
Clients
APAP AP AP
https://festa.tplinkcloud.com
1. Make sure that your devices can access the internet.
2. Launch a web browser and enter https://festa.tplinkcloud.com in the address
bar. Log in with your TP-Link ID.
3. Click + Add Controller, then you will see you have successfully registered for a
Cloud-Based Controller and the controller has been added to the controller list.
Configuration
Some models featured in this guide may be unavailable in your country or region. For local
sales information, visit https://www.tp-link.com/business-networking/.
Safety Information
EU declaration of conformity
UK declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and
Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca/
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Plug the product into the wall outlets with earthing connection through the power supply
cord.
The working temperature for the device shall be within 0-40 ℃.
Place the device with its bottom surface downward.
The plug on the power supply cord is used as the disconnect device, the socket-outlet
shall be easily accessible. (Not for Festa FS308G)
The socket-outlet shall be installed near the equipment and shall be easily accessible. (Not
for Festa FS308G)
Option 1: Via a Web Browser
You can easily configure and manage Festa Smart Switches via the Festa Cloud-Based Controller.
4. Click Set Up Now, click Config New Setup and follow the step-by-step
instructions to complete the configuration wizard of the controller.
5. On the controller’s management page, go to Devices, and click + Add Devices
and follow the step-by-step instructions to adopt your devices.
Now you can configure and manage your devices on the controller.
Note:
• Before you start, be sure to power up and connect your devices according to
the topology figure.
• A DHCP server (typically a router with DHCP function enabled) is required to
assign IP addresses to the devices and clients in your local network.
Option 2: Via Festa App
1. Download and install the Festa App from App Store or Google Play.
2. Launch the Festa App and log in with your TP-Link ID.
3. Tap + on the upper right corner, then you will see you have successfully
registered for a Cloud-Based Controller and the controller has been added to
the controller list.
4. Tap Confirm, tap Let’s Get Started and follow the step-by-step instructions to
complete the configuration wizard of the controller.
5. On the controller’s management page, go to Devices, and click + on the upper
right corner, and follow the step-by-step instructions to adopt your devices.
Now you can configure and manage your devices via the Festa App.
Scan for Festa App Festa App
or
For technical support and other information, please visit
https://www.tp-link.com/support/?type=smb, or simply scan the QR code.
To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit https://community.tp-link.com/business to join TP-Link Community.
Note:
• For detailed configurations, refer to the User Guide of the controller. The guide
can be found on the download center of our official website:
https://www.tp-link.com/support/download/?type=smb.
• Festa devices also support basic troubleshooting in the Standalone Mode. For
troubleshooting instructions, please refer to the FAQ on our official website:
https://www.tp-link.com/support/faq/3910/.

Produkt Specifikationer

Mærke: TP-Link
Kategori: Skifte
Model: Festa FS308G

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Festa FS308G stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte TP-Link Manualer

TP-Link

TP-Link Omada ES210GMP Manual

2 Januar 2025
TP-Link

TP-Link TL-SG605 Manual

10 December 2024
TP-Link

TP-Link Festa FS328G Manual

3 Oktober 2024
TP-Link

TP-Link Festa FS352GP Manual

3 September 2024
TP-Link

TP-Link Festa FS310GP Manual

2 September 2024
TP-Link

TP-Link Festa FS308G Manual

2 September 2024
TP-Link

TP-Link Festa FS328GP Manual

2 September 2024
TP-Link

TP-Link Festa FS308GP Manual

2 September 2024
TP-Link

TP-Link LS106LP Manual

31 August 2024
TP-Link

TP-Link LS105LP Manual

31 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom

Lancom GS-2412 Manual

4 April 2025
Lancom

Lancom GS-2412P Manual

4 April 2025
Lancom

Lancom GS-2426 Manual

4 April 2025
Hager

Hager ARF970D Manual

3 April 2025
Hager

Hager ARF920D Manual

3 April 2025
Roline

Roline 14.01.3579 Manual

2 April 2025
Fantini Cosmi

Fantini Cosmi B12BN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12DN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12GN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12HN Manual

1 April 2025