TP-Link TL-SG1210MP Manual

TP-Link Skifte TL-SG1210MP

Læs gratis den danske manual til TP-Link TL-SG1210MP (3 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om TP-Link TL-SG1210MP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Wall Mounting Guide

Wall Mountable Switches

1.1 Wall Mounting Preparation

Before mounting the switch, you need to prepare the tools below:

ǴA screw driver.

ǴTwo screws which complies to the corresponding standard. For details, see Wall

Mounting Specification.

1.2 Wall Mounting Procedure

On the bottom of the panel, there are two mounting holes. You need to drive two screws

into the wall, then mount the switch on the wall. Note that the switch should be mounted

on the wall upright rather than sideways.

1) Determine the location on the wall where you want to mount the switch.

2) Mark the wall where the two mounting holes are. The distance between the two marks

must be the same as that between the two mounting holes of the switch. For the wall-

mounting-holes distance, see .Wall Mounting Specification

3) Drive the screws into the wall at the marks using the screw driver. For the Screw-

Head-to-Wall Minimum Distance, see .Wall Mounting Specification

4) Mount the switch on the wall.

1.3 Wall Mounting Specification

Model

Screw Standard of

ANSI B1.1

Minimum Length

of Screw

Screw-Head-to-Wall

Minimum Distance

Wall-Mounting-Holes

Distance

LS105G 4#, (5#), 6# 7mm 1.5mm 76mm

LS108G 4#, (5#), 6# 7mm 1.5mm 65mm

LS1005G 4#, (5#), 6# 7mm 1.5mm 38mm

LS1008G 4#, (5#), 6# 7mm 1.5mm 48mm

TL-SF1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SF1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SF1006P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

TL-SF1008LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SF1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SF1009P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SG1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SG1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SG1008D 4# 8mm 2mm 100mm

TL-SG1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Skifte
Model:	TL-SG1210MP
Bredde:	209 mm
Dybde:	126 mm
Højde:	26 mm
Produktfarve:	Sort
Pakkevægt:	1410 g
Pakkedybde:	315 mm
Pakkebredde:	240 mm
Pakkehøjde:	70 mm
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Hurtig start guide:	Ja
Strømkilde:	DC
Certificering:	CE, FCC
Strømforbrug (maks.):	141.4 W
Netværksstandarder:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Indgangsspænding:	53.5 V
Indgangsstrøm:	2.43 A
Strøm over Ethernet (PoE):	Ja
Switch-type:	Ikke administreret
Total Power over Ethernet (PoE):	123 W
Power over Ethernet plus (PoE+) porte, antal:	8
Power over Ethernet (PoE) effekt pr. port:	30 W
10G understøttelse:	Ingen
Auto MDI/MDI-X:	Ja
Flowkontrol support:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX
Basis omskiftning RJ-45 Ethernet porte, antal:	9
Basis omskiftning RJ-45 Ethernet porttype:	Gigabit Ethernet (10/100/1000)
Kombo SFP porte, antal:	1
Opbevar-og-frem:	Ja
MAC adresselabel:	4000 entries
Switch kapacitet:	20 Gbit/sek.
Stativ-montering:	Ingen
Varmeafgivelse:	482.17 BUT/t
MAC-adresse auto-indlæring understøttet:	Ja
MAC-adresse auto-forældelse understøttet:	Ja
Auto-forhandling:	Ja
Pakke bufferlager:	14.88 MB
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e
Ventilatorfri:	Ja