TP-Link TL-SM331T Manual

TP-Link Ikke kategoriseret TL-SM331T

Læs gratis den danske manual til TP-Link TL-SM331T (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 57 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 29 anmeldelser. Har du et spørgsmål om TP-Link TL-SM331T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installing the RJ45 SFP / RJ45 SFP+ Module

RJ45 SFP / RJ45 SFP+ Module

1. Lock the yellow latch into place and insert the module into an SFP / SFP+ slot with label side up.

2. Gently push the module into the slot until you hear a click. Then, insert the RJ45 network cable.

Installation Guide

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides,

welcome to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link

users or engineers, please visit https://community.tp-link.com

to join TP-Link Community.

Removing the RJ45 SFP / RJ45 SFP+ Module

1. Press the RJ45 crystal head and pull out the cable.

2. Pull down the latch and remove the module.

Note: Images may dier from the actual products.

The 10G RJ45 SFP+ modules consume more power than optical modules. This may result in higher heat. To avoid overheating, it is recommended to place the

modules separated by multiple optical transceivers or empty slots. When used in high temperature environments additional cooling must be applied.,

Positioning the 10G RJ45 SFP+ Modules

Specications

Compatiblity

We recommend that you use only TP-Link modules on your TP-Link devices.

TL-SM331T:

https://www.tp-link.com/tl-sm331t/product-list/

TL-SM5310-T:

https://www.tp-link.com/tl-sm5310-t/product-list/

Note:

1. TL-SM331T does not support the data rate of 10 Mbps or 100 Mbps.TL-SM

5310-T does not support the data rate of 10 Mbps, but supports 100 Mbps /

1 Gbps / 2.5 Gbps / 5 Gbps / 10 Gbps.

2. When a Gigabit RJ45 SFP module is inserted into a 10 Gbps SFP+ slot, extra



3. When the 10G RJ45 SFP+ module is inserted into a 10 Gbps SFP+ slot and

the maximum rate of the peer connection port is 5 Gbps, 2.5 Gbps, 1 Gbps,



manually enabled.

To check the compatible TP-Link devices of your module, please visit our

website:

Product Operating Temperature 

Storage Temperature 

Storage Humidity 5% to 90% RH, Non-condensing

Operating Humidity 10% to 90% RH, Non-condensing

Environmental and Physical Specications

Safety Information



Do not touch the device while it is operating.

To prevent potential risks caused by heat, do not place your network device on

non-heat-resistant paper, cloth, fabrics, plastics, or any other surface that

doesn't provide space beneath your device for heat dissipation.

            

temperature should be lowered to keep the temperature of the modules within

the recommended range.

Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/30/EU,



The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce.

EU Declaration of Conformity

UK Declaration of Conformity

Scenario 1:

Not RecommendedRecommended

Scenario 2:

Recommended Not Recommended

General Specications

RX_LOS

MAC Interface

  2.5 W

Yes

Standards and Protocols

Normal

Data Rate

TX_Fault

TX_Disable

Yes

Hot Swappable

LLF

LFP

1000BASE-X

1.25 Gbps

TL-SM331T

1000BASE-T: UTP

cat.5e or above



TL-SM5310-T

XFI

10.3125 Gbps

100BASE-TX: UTP cat.5



1000BASE-T/2.5GBASE-T/

5GBASE-T: UTP cat.5e or



10GBASE-T: UTP cat.6a or



Cable Distance

DDM

Yes























Normal

Supported

TL-SM331T TL-SM5310-T

Supported

Supported

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Electromagnetic Compatibility



The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca



power margin.

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	TL-SM331T
Bredde:	67.4 mm
Dybde:	13.75 mm
Højde:	13.8 mm
Brugervejledning:	Ja
Produktfarve:	Sølv
Pakkevægt:	60 g
Pakkedybde:	122.5 mm
Pakkebredde:	81.5 mm
Pakkehøjde:	38.5 mm
Opbevaringstemperatur (T-T):	-40 - 85 °C
Ethernet LAN:	Ja
Driftstemperatur (T-T):	0 - 70 °C
Certificering:	FCC, CE
Netværksstandarder:	IEEE 802.3ae
Harmoniseret systemkode (HS):	85369010
Indgangsspænding:	3.3 V
Maksimal dataoverførselshastighed:	1250 Mbit/s
SFP modtagertype:	Fiberoptisk
Grænsefladetype:	SFP
Fiber kabeldiametre understøttes (kerne/beklædning):	50/125 µm
Multitilstand fiber (MMF) understøttet:	Ja
Maksimal overførselsafstand:	300 m
Bølgelængde:	850 nm
Ethernet-grænsefladetype:	Gigabit Ethernet
Antal produkter inkluderet:	1 stk