Triax TMS 932 CE Manual

Triax Skifte TMS 932 CE

Læs gratis den danske manual til Triax TMS 932 CE (7 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Triax TMS 932 CE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Series

TMS 9XX SE A-EU

TMS 9XX SE P-EU

Single, w/PSU and EU Mains plug, 8-32 out, active TER

Single, w/PSU and EU Mains plug, 8-32 out, passive TER

TMS 9XX SE P-R

Single, no PSU, for SAT receiver DC sourcing, 8-32 out, passive TER

TMS 9XX CE A-EU

Cascade, for external PSU, 8-32 out, active TER

TMS 9XX CE P-EU

Cascade, for external PSU, 8-32 out, passive TER

Language

Version: 9.2016.A

User Guide

TMS 9XX SE/CE Euro Line Multiswitch Series

Triax Euro Line TMS 9XX SE/CE Multiswitch

The Triax Euro Line Multiswitch Range is a very high quality range of Multiswitches for single or cascade SAT-IF

(satellite) distribution networks with a need for RF loop-through. Available in both active and passive variants for RF

loop-through the range offers a perfect selection to use for both terrestrial aerial reception signals (A-active), as well

as a full CATV signal including DOCSIS support (P-passive). NOTE, DOCSIS limited by SAT-IF that occupies 950-

2150MHz.

The Euro Line Series is Made in Europe, and fully meets the EN 50083-3 Class A shielding requirements.

The purpose of this guide is to enable the successful installation and use of the TMS 9XX Multiswitch series.

The TMS 9XX Series (Two satellite positions):

 TMS 9XX SE P-EU = Stand-alone unit, terrestrial passive, built-in PSU with EU Mains plug.

 TMS 9XX SE A-EU = Stand-alone unit, terrestrial active, built-in PSU with EU Mains plug.

 TMS 9XX SE P-R = Stand-alone unit, terrestrial passive. No PSU.

 Power is sourced from the SAT-Receivers. Optionally an external PSU can be

added. This Version has no T-Active option to avoid too much power

consumption from connected SAT-receiver(s).

 TMS 9XX CE P = Cascaded output unit, terrestrial passive, for external PSU.

 TMS 9XX CE A = Cascaded output unit, terrestrial active, for external PSU.

 NOTE: The TMS 9XX Range uses two Quattro LNBs each receiving from one orbital Satellite position.

 XX are placeholder for individual units with 08, 12, 16, 24 or 32 user/subscriber outputs.

 Please refer to Triax.com for Euro Series Multiswitch products for reception of 1, 3 and 4 SAT positions

Security

 During installation please observe the requirements set forth in the EU safety standards EN 60065 and

50083-1 as well as local requirements and standards for SAT-IF and RF SMATV-installations.

 Exercise care and good practise when mounting coaxial connectors (F-connectors) on the cables to

avoid short circuits and unnecessary emission of noise and disturbance of neighbouring installations.

 Only perform multi switch installation jobs while mains plug of all power supplies are disconnected.

 Make sure no short circuits are present on the distribution cables before applying mains power to the

multi switch installation and Satellite Receivers. Short circuits may overload, overheat and harm Power

Supplies and Satellite Receivers that are attempting to supply an excessive amount of current.

 Check the rating labels of any attached power supply and make sure the local Mains Voltage you

connect it to never exceeds those ratings. Failure to observe this and act accordingly may compromise

the security and safety of the whole system and expose you and everyone attached to the installation to

damage, fire and electric shock.

 Make sure the ambient temperature at the installation site never exceeds the temperature limits for the

product installed. If required you must arrange for suitable temperature conditioning. Failure to observe

this and act accordingly may compromise the performance, security and safety of the whole system and

expose you and everyone attached to the installation to damage, fire and electric shock.

 A multi switch installation should be earthed. An earth screw is available on the multi switch unit.

 The manufacturer is not responsible for damage or system failures caused by Installers ignoring the

above safety measures.

Installation:

 First rule in any Multiswitch installation are: NEVER use a too small size satellite Dish, and

 NEVER use the compromise of a dual mount LNB for a multi satellite position reception on one Dish.

Produkt Specifikationer

Mærke:	Triax
Kategori:	Skifte
Model:	TMS 932 CE

Har du brug for hjælp?

Hvis du har brug for hjælp til Triax TMS 932 CE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Triax Manualer

Triax TMS 932 CE Manual

1 September 2024

Triax TMS 916 CE P Manual

18 Oktober 2022

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025