Tripp Lite B121-000 Manual

Tripp Lite Wifi repeater B121-000

Læs gratis den danske manual til Tripp Lite B121-000 (4 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Tripp Lite B121-000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Warranty

Registration:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

DisplayPort

Active Extender

Model:

B121-000

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Contents:

• B121-000 DisplayPort Active Extender

• External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)

• Screwdriver for equalization adjustment

Product Features:

• Extend a 1920 x 1080 / 1080p (60Hz) signal up to 150 ft. from the source

• Built-in equalization control to adjust the video image

• DisplayPort version 1.1a compliant

• HDCP compliant

Optional Accessories:

• P580-Series DisplayPort cables

Owner’s Manual

12-366 93-3236.indd 1 9/10/2012 5:08:31 PM

Installation

Notes:

1. Test to make sure the entire installation works properly before pulling cables through ceilings/

walls.

2. The B121-000 has been designed for use with Tripp Lite P580-Series DisplayPort cables. To

ensure maximum distance and performance, it is recommended that you use Tripp Lite P580-

Series DisplayPort cabling. For distances over 100 ft., 24Awg cable is required (Available from

Tripp Lite as a custom order).

DISPLAYPORT

EXTENDER

Model: B121-000

SOURCE

DISPLAY

1 Connect the longer DisplayPort cable between the source and the Source port on the

B121-000.

Note: When transmitting a 1920 x 1080 (60Hz) signal, the DisplayPort cable connecting the

source to the B121-000 must be no longer than 150 ft. For distances over 100 ft., 24Awg cable

is required (Available from Tripp Lite as a custom order).

2 Connect the shorter DisplayPort cable between the monitor and the Display port on the

B121-000.

Note: The DisplayPort cable used to connect the monitor to the B121-000 must be no longer

than 16 ft. (5 m).

3 Connect the external power supply to the B121-000, and plug it into a Tripp Lite Surge

Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).

4 If necessary, use the equalization control to adjust the video image. Next to the

equalization control is a switch labeled S / L, which stands for Short Long and . When

adjusting the equalization, if you go through each setting without achieving an

acceptable image, flip this switch to the other setting. This provides a new range of

equalization settings to go through until an acceptable image is displayed.

Note: An improper Equalization setting can result in no image being displayed at all. Try each

setting until an acceptable image is displayed.

12-366 93-3236.indd 2 9/10/2012 5:08:32 PM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Wifi repeater
Model:	B121-000
Type:	AV sender
Bredde:	63.5 mm
Dybde:	50.8 mm
Højde:	22.9 mm
Vægt:	50 g
Brugervejledning:	Ja
Produktfarve:	Sort
Strøm:	0.5 A
Pakkevægt:	270 g
Pakkedybde:	182.9 mm
Pakkebredde:	57.2 mm
Pakkehøjde:	152.4 mm
Understøttede videotilstande:	1080p
Maksimal opløsning:	1920 x 1080 pixel
Understøttede grafikopløsninger:	1920 x 1080 (HD 1080)
DC-in-stik:	Ja
LED-indikatorer:	Ja
Effektkrav:	100-240V, 50/60Hz
Hovedkassen højde (udvendigt):	228.6 mm
Hovedkassens længde (udvendigt):	576.6 mm
Hovedkassens bruttovægt (udvendigt):	6120 g
Hovedkassens bredde (udvendigt):	340.4 mm
Oprindelsesland:	Taiwan
Driftsspænding:	240 V
Maksimal overførselsafstand:	45.75 m
Ekstern strømadapter:	Ja
Produkter pr. hovedkasse (udvendigt):	20 stk
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332175509
Antal forbindelser:	2
Stiktype:	Display Port