Tripp Lite E2SLD Manual

Tripp Lite Detektor E2SLD

Læs gratis den danske manual til Tripp Lite E2SLD (16 sider) i kategorien Detektor. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Tripp Lite E2SLD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Owner’s Manual

EnviroSense2

Leak Detection Sensor

Model: E2SLD

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1 Introduction 2

1-1 Parts List 2

1-2 Tools Required 2

1-3 Speciﬁcations 2

2 Important Safety Instructions 2

3 E2SLD Installation 3

3-1 Mounting the Leak Detection Sensor 3

3-2 Wiring the Sensor 3

4 Connecting to WEBCARDLX and E2MTHDI 4

5 Warranty and Product Registration 4

Español 5

Français 9

Русский 13

1-1 Parts List

A Water Sensor

B Cover

C 22 AWG Cable, 15 ft. (4.6 m)

D Owner’s Manual

E Double-Sided Adhesive Tape

1-2 Tools Required

A Wire Cutters

B Wire Strippers

C Phillips Screwdriver

D Flathead Screwdriver

1-3 Speciﬁcations

Electrical

Voltage: 5~24V DC

Standby Current: 1 mA

Alarm Current: 200 mA

Contact Closure Type: Normally Open

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the products

described in this manual. Read all instructions and warnings thoroughly before attempting installation. Failure to comply may

invalidate the warranty and cause property damage and/or personal injury.

1 – Introduction

2 – Important Safety Instructions

The E2SLD leak detection sensor is designed to detect water leakage or leakage of any electrically conductive ﬂuid. The E2SLD supports a

Normally Open contact closure connection. It must be used with a compatible Tripp Lite UPS or PDU equipped with the WEBCARDLX or

LX Platform interface, along with a compatible E2 environmental sensor module (both are sold separately).

• Install in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and gasses, conductive contami-

nants, dust and direct sunlight.

• Provide suitable grounding in accordance with all applicable electrical wiring regulations.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

A B C D

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Detektor
Model:	E2SLD
Bredde:	63.5 mm
Dybde:	12.7 mm
Højde:	12.7 mm
Vægt:	20 g
Produktfarve:	Hvid
Produkttype:	Sensmitter
Pakkevægt:	100 g
Pakkedybde:	153.9 mm
Pakkebredde:	114 mm
Pakkehøjde:	32 mm
Husmateriale:	Acrylonitrilbutadienstyren
Forbindelsesteknologi:	Ledningsført
Certificering:	TAA, RoHS
Hovedkassen højde (udvendigt):	195.1 mm
Hovedkassens længde (udvendigt):	484.9 mm
Hovedkassens bruttovægt (udvendigt):	3000 g
Hovedkassens bredde (udvendigt):	249.9 mm
Oprindelsesland:	Taiwan
Produkter pr. hovedkasse (udvendigt):	30 stk
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332213614