Tripp Lite PDUMNV15 Manual


Læs nedenfor 📖 manual på dansk for Tripp Lite PDUMNV15 (36 sider) i kategorien Strømskinne. Denne guide var nyttig for 8 personer og blev bedømt med 4.9 stjerner i gennemsnit af 4.5 brugere

Side 1/36
Owner’s Manual
Monitored Rack PDU
Switched Rack PDU
0U (Vertical) Format
Important Safety Instructions 2
Monitored Rack PDU Features 2
Switched Rack PDU Features 3
Installation 3
Features 8
Configuration and Operation 11
Service 11
Warranty and Product Registration 12
Español 13
Français 25
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PDUMN15/NET
(120V 12A Model)
Series Number: AG-0008
PDUMNV20/NET
(120V 16A Model)
Series Number: AG-0009
PDUMNV30/NET
(120V 24A Model)
Series Number: AG-0010
16-10-209-933666.indb 1 12/22/2016 11:31:08 AM
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
Important Safety Instructions
Monitored Rack PDU Features
The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line
noise protection for connected equipment.
The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).
The PDU must be installed by a qualified technician only.
Do not attempt to mount the PDU to an insecure or unstable surface.
Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
The electrical outlets supplying power to the equipment should be installed near the
equipment and easily accessible.
Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
Never attempt to install electrical equipment during a thunderstorm.
Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlets rating.
The total load connected to the PDU must not exceed the maximum load rating for the PDU.
Do not attempt to modify the PDU, input plugs or power cables.
Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
Do not attempt to use the PDU if any part of it becomes damaged.
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
Network interface enables remote power monitoring and event notification.
Digital amp meter for on-site load monitoring.
Optional EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) allow for a variety of
environmental monitoring and control options.
Toolless button-mount installation in Tripp Lite SmartRack
® and many third-party enclosures.
16-10-209-933666.indb 2 12/22/2016 11:31:08 AM


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Strømskinne
Model: PDUMNV15

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PDUMNV15 stil et spørgsmål nedenfor, og andre brugere vil svare dig