Tripp Lite SmartPro SMART1000RM1U Manual

Tripp Lite Uafbrydelig strømforsyning (UPS) SmartPro SMART1000RM1U

Læs gratis den danske manual til Tripp Lite SmartPro SMART1000RM1U (36 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartPro SMART1000RM1U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Owner’s Manual

1111 W. 35th Street Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Important Safety Instructions 2

Mounting 3

Quick Installation 5

Basic Operation 7

Storage and Service 11

Español

®is a registered trademark of Tripp Lite.

SmartPro®Rackmount

Intelligent, Line-Interactive UPS Systems

• 120V Sine-Wave Input/Output* • 500VA - 3000VA Capacities

• Extended-Run Options

* Except SMART500RT1U: sine-wave output on line; PWM output on battery.

Battery Replacement 12

Français 25

Optional Installation 6

WARRANTY

REGISTRATION

to win a FREE Tripp Lite product!

www.tripplite.com/warranty

200503166 93-2406 Sinewave SmartPro Rackmount UPS OM.qxd 3/29/2005 3:12 PM Page 1

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during the installation, operation

and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

• Use caution when lifting UPS. Because of the considerable weight of all Rackmount UPS

systems, at least two people should assist in lifting and installing them.

• Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, the ambient temperature near your UPS should be between 0° C and

40° C (between 32° F and 104° F).

• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its

vents or fan openings.

UPS Connection Warnings

• The UPS contains its own energy source (battery). The output terminals may be live even

when the UPS is not connected to an AC supply.

• Connect your UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug

in a way that would eliminate the UPS's connection to ground. Do not use adapters that

eliminate the UPS’s connection to ground.

• Do not plug your UPS into itself; this will damage the UPS and void your warranty.

• If you are connecting your UPS to a motor-powered AC generator, the generator must provide

filtered, frequency-regulated computer-grade output. Connecting your UPS to a generator will

void its Ultimate Lifetime Insurance.

Equipment Connection Warnings

• Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or

failure of a Tripp Lite UPS System could cause failure or significantly alter the performance

of a life-support device.

• Do not connect surge suppressors or extension cords to the output of your UPS. This might

overload the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or

batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the

UPS before performing battery replacement. Use tools with insulated handles. There are no

user-serviceable parts inside the UPS. Battery replacement should be performed only by

authorized service personnel using the same number and type of batteries (sealed Lead-Acid).

The batteries are recyclable. Refer to your local codes for disposal requirements or in the

USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit

www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System

Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com to

locate the specific replacement battery for your UPS.

• During hot-swap battery replacement, the UPS will not provide backup power in the event of

a blackout or other power interruptions.

• Do not operate UPS without batteries.

• When adding external battery packs to select models with external battery pack connectors,

connect only Tripp Lite-recommended battery packs of the correct voltage and type. Do not

connect or disconnect battery packs when the UPS is operating on battery power.

200503166 93-2406 Sinewave SmartPro Rackmount UPS OM.qxd 3/29/2005 3:12 PM Page 2

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Uafbrydelig strømforsyning (UPS)
Model:	SmartPro SMART1000RM1U

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SmartPro SMART1000RM1U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Uafbrydelig strømforsyning (UPS) Tripp Lite Manualer

Tripp Lite S3MT-30KWR480V Manual

18 September 2024

Tripp Lite S3MT-30K480V Manual

18 September 2024

Tripp Lite S3MT-100KWR480V Manual

18 September 2024

Tripp Lite S3MT-100K480V Manual

18 September 2024

Tripp Lite SmartPro SMART1000RM1U Manual

14 Maj 2024

Tripp Lite Internet600 Manual

8 Maj 2024

Tripp Lite SmartOnline SUT60K Manual

28 April 2024

Tripp Lite Internet900U Manual

19 April 2024

Tripp Lite SmartOnline SV100KL Manual

5 Marts 2024

Tripp Lite SmartPro SMART1500RMXL2UA Manual

20 Februar 2024

Uafbrydelig strømforsyning (UPS) Manualer

Nyeste Uafbrydelig strømforsyning (UPS) Manualer

Conceptronic ZEUS02G Manual

17 Juni 2025

Middle Atlantic UPS-IPCARD Manual

15 Juni 2025

PowerWalker VI 1000 GXB Manual

9 Juni 2025

Green Cell UPS09 Manual

8 Juni 2025

PowerWalker Basic VI 600 STL Manual

7 Juni 2025

APC Back-UPS Pro BN1350M2 Manual

10 April 2025

APC RBC172 Manual

28 Marts 2025

APC Back-UPS XS 1500 Manual

28 Marts 2025

APC Smart-UPS SCL500RMI1UNC Manual

28 Marts 2025

APC Back-UPS Pro BR1000G Manual

27 Marts 2025