Tripp Lite SmartPro SMART1050SLTAA Manual

Tripp Lite Uafbrydelig strømforsyning (UPS) SmartPro SMART1050SLTAA

Læs gratis den danske manual til Tripp Lite SmartPro SMART1050SLTAA (32 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartPro SMART1050SLTAA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Owner’s Manual

SmartPro® SLT

Intelligent, Line-Interactive UPS Systems

100/110/120V Input/Output • Sine Wave Output

Models:

Not suitable for mobile applications.

Important Safety Instructions 2

Quick Installation 3

Optional Installation 4

Basic Operation 4

Battery Replacement 9

Product Registration 10

Storage & Service 10

Español 12

Français 23

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com

® is a registered trademark of Tripp Lite.

SMART1050SLT,

SMART1050SLTAA

(Series No. AGSM5384)

SMART1500SLT

(Series No. AGSM7136)

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

16-02-272-932442.indb 1 2/18/2016 4:55:06 PM

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the

installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed

these warnings may affect your warranty.

UPS Location Warnings

• Install your UPS indoors, away from excess moisture or heat, conductive

contaminants, dust or direct sunlight.

• For best performance, keep the indoor temperature between between 32º F and

104º F (0º C and 40º C).

• Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

• Connect your UPS directly to a properly grounded AC power outlet. Do not plug the

UPS into itself; this will damage the UPS.

• Be sure to use the proper overcurrent protection for the installation, in accordance

with the plug/equipment rating.

• Do not modify the UPS's plug, and do not use an adapter that would eliminate the

UPS’s ground connection.

• Do not use extension cords to connect the UPS to an AC outlet.

• The electrical outlets supplying power to the equipment should be installed near the

equipment and easily accessible.

• If the UPS receives power from a motor-powered AC generator, the generator must

provide clean, filtered, computer-grade output.

Equipment Connection Warnings

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to

significantly affect its safety or effectiveness is not recommended. Do not use this

equipment in the presence of a flammable anesthetic mixture with air, oxygen or

nitrous oxide.

• Do not connect surge protectors or extension cords to the output of your UPS.

This might damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

• Batteries can present a risk of electrical shock and burn from high short-circuit

current. Observe proper precautions. There are no user-serviceable parts inside the

UPS. Do not open the UPS except to perform battery replacement. Do not open

batteries. Do not short or bridge the battery terminals with any object. Unplug and

turn off the UPS before performing battery replacement. Use tools with insulated

handles. Battery replacement should be performed only by authorized service personnel

using the same number and type of batteries (Sealed Lead-Acid). Do not dispose of

the batteries in a fire. The batteries are recyclable. Refer to your local codes for

disposal requirements or visit http://www.tripplite.com/support/recycling-program

for recycling information. Tripp Lite offers a complete line of UPS System

Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at

www.tripplite.com/support/battery/index.cfm to locate the specific replacement

battery for your UPS.

Important Safety Instructions

16-02-272-932442.indb 2 2/18/2016 4:55:07 PM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Uafbrydelig strømforsyning (UPS)
Model:	SmartPro SMART1050SLTAA
Bredde:	171 mm
Dybde:	337 mm
Højde:	260 mm
Vægt:	16300 g
Produktfarve:	Sort
Formfaktor:	Tower
Opbevaringstemperatur (T-T):	-15 - 50 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 40 °C
Udgangseffekt:	650 W
Certificering:	TAA\nUL1778
LED-indikatorer:	Ja
Kabellængde:	1.8 m
Batteritype:	RBC24-SLT
Opladningstid for batteri:	6 t
Grænseflade:	USB; DB9
Indgangsfrekvens:	50/60 Hz
Strømbeskyttelsesfunktioner:	Over voltage,Under voltage
Strøm faktor:	0.6
Nominel udgangsspænding:	120 V
Nominel indgangsspænding:	120 V
AC udgange, antal:	8 AC stikkontakt(er)
AC stikkontakt typer:	NEMA 5–15R
Overspænding energivurdering:	690 J
Indgående driftsspænding (maks.):	145 V
Output strømkapacitet (VA):	1.05 kVA
Indgående driftsspænding (min.):	83 V
Udgangs driftsspænding (min.):	120 V
Udgangs driftsspænding (maks.):	120 V
Beskyttelsesfunktioner mod strømstød:	Network,Telephone
Typisk backup tid ved halv styrke:	19 min.
Typisk backup tid ved fuld styrke:	7 min.
Hot-swap batteri:	Ja