Tripp Lite SmartPro SMART1500RMXL2UA Manual

Tripp Lite Uafbrydelig strømforsyning (UPS) SmartPro SMART1500RMXL2UA

Læs gratis den danske manual til Tripp Lite SmartPro SMART1500RMXL2UA (60 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Tripp Lite SmartPro SMART1500RMXL2UA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/60
1
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved. SmartPro
® is a registered trademark of Tripp Lite.
Important Safety Instructions 2
Mounting 4
Quick Installation 6
Optional Installation 7
Basic Operation 9
Storage and Service 17
Battery Replacement 18
Warranty Registration 20
Español 21
Français 41
SmartPro® 2U Rackmount
Intelligent, Line-Interactive UPS Systems
120V Sine Wave Output • 1,000VA—1,500VA
SMART1500RMXL2UA
(AG-0006, AG-02F7)
SMART1500RM2U
(AG-0007, AG-02F8)
SMART1000RMXL2U
(AG-0011, AG-02F9)
Not suitable for mobile applications.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
18-05-213-933148.indb 1 7/13/2018 1:04:15 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
• Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS
systems, at least two people should assist in lifting and installing them.
• Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.
• For best performance, the ambient temperature near the UPS should be between 0° C and 40° C
(between 32° F and 104° F).
• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents
or fan openings.
• When mounting the UPS system in a tower orientation, make sure the LCD Screen panel is at the
top of the UPS, not at the bottom.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner
will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered
under warranty.
UPS Connection Warnings
• The UPS contains its own energy source (battery). The output terminals may be live even when
the UPS is not connected to an AC supply.
• Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way
that would eliminate the UPS’s connection to ground. Do not use adapters that eliminate the
UPS’s connection to ground.
• Do not plug the UPS into itself; this will damage the UPS and void your warranty.
• If you are connecting the UPS to a motor-powered AC generator, the generator must provide
filtered, frequency-regulated computer-grade output. Connecting the UPS to a generator will void
its Ultimate Lifetime Insurance.
• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian
Electrical Code, Part I, C22.1.
• Short circuit backup protection and overcurrent protection are provided by the building installation
for permanently connected models.
• To reduce the risk of fire, connect only to a circuit provided branch circuit overcurrent protection
in accordance with the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code,
Part I, C22.1. Be sure to use maximum 20A overcurrent protection, in accordance with the plug/
equipment rating, for the installation.
• The plug on the power supply cord is intended to serve as the disconnect device. Be sure that the
socket-outlet is installed near the equipment and is made easily accessible.
Caution! This UPS may receive power from more than one source. Disconnection
of the AC and DC sources is required to de-energize the unit before servicing.
18-05-213-933148.indb 2 7/13/2018 1:04:15 PM

Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Uafbrydelig strømforsyning (UPS)
Model: SmartPro SMART1500RMXL2UA

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SmartPro SMART1500RMXL2UA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Uafbrydelig strømforsyning (UPS) Tripp Lite Manualer

Tripp Lite

Tripp Lite PR40 Manual

31 Juli 2025
Tripp Lite

Tripp Lite SU140KMBPK Manual

31 Juli 2025
Tripp Lite

Tripp Lite BP12V82 Manual

31 Juli 2025
Tripp Lite

Tripp Lite SV20PM Manual

30 Juli 2025
Tripp Lite

Tripp Lite S3MT-30KWR480V Manual

18 September 2024
Tripp Lite

Tripp Lite S3MT-30K480V Manual

18 September 2024
Tripp Lite

Tripp Lite S3MT-100KWR480V Manual

18 September 2024
Tripp Lite

Tripp Lite S3MT-100K480V Manual

18 September 2024
Tripp Lite

Tripp Lite SmartPro SMART1000RM1U Manual

14 Maj 2024
Tripp Lite

Tripp Lite Internet600 Manual

8 Maj 2024

Uafbrydelig strømforsyning (UPS) Manualer

Nyeste Uafbrydelig strømforsyning (UPS) Manualer

Eaton

Eaton 3S700D Manual

12 August 2025
APC

APC E3MCBC10B Manual

6 August 2025
APC

APC Back-UPS BE700G3 Manual

5 August 2025
CyberPower

CyberPower LX1500GU3 Manual

5 August 2025
APC

APC GVSBPIT75 Manual

5 August 2025
APC

APC GVLMBCA200K500H Manual

4 August 2025
APC

APC E3SBPAR10K40F Manual

4 August 2025
APC

APC BE650G2-GR Manual

4 August 2025
APC

APC SP3OPT002 Manual

4 August 2025
APC

APC SP3OPT003 Manual

4 August 2025