Tripp Lite SRXCOOL12KB Manual

Tripp Lite Aircondition SRXCOOL12KB

Læs gratis den danske manual til Tripp Lite SRXCOOL12KB (44 sider) i kategorien Aircondition. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Tripp Lite SRXCOOL12KB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

Portable Air Conditioning Unit

SRCOOL12K (120 V, 60 Hz)

SRXCOOL12K (230V, 50 Hz)

SRXCOOL12KB (230V, 50 Hz)

Owner’s Manual

Introduction 2

Important Safety Instructions 2

Features 3

Installation 4

Operation 8

Maintenance 9

Troubleshooting 9

Storage and Service 10

Warranty and Product Registration 11

Regulatory Compliance 11

Español 12

Français 23

Русский 34

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

SYST

RPS

STAT

DUPLXSPEED

MODE

15X

31X3

47X

MASTR

STACK

SYSTRPS

STATDUPLX

SPEED

MODE

X31X33X

MASTR

STACK

SYST

RPS

STAT

DUPLX

SPEED

MODE

15X

1X33X

MASTR

STACK

MODE

15X 31X33X

47X

Introduction

The self-contained Portable Air Conditioning Unit provides 12,000 BTU (up to 3.4 kW) of supplemental cooling capacity. Designed for IT

environments, it’s ideal for cooling overheated rack enclosures, IT equipment hot spots and network closets without access to facility air

conditioning. The Portable Air Conditioning Unit can focus cool air through its ﬂexible cooling duct or cool a small room through its louvered vent.

It also ﬁlters and dehumidiﬁes air to improve operating conditions and equipment reliability. Condensate is re-evaporated for drip-free operation,

so you won’t waste time emptying water collection tanks. The self-contained design does not require any plumbing or special circuits, so setup is

quick and easy. Eco-friendly R410A refrigerant meets environmental standards worldwide.

Recommended Applications:

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation

and storage of this product. Failure to heed these warnings may affect your warranty.

Warnings

• The individual user should determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual

applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or ﬁtness of this device

for any speciﬁc application.

• Install the unit indoors, away from extreme temperatures or humidity, direct sunlight, dust and conductive contaminants.

• Leave adequate space around the unit for ventilation, with rear and vented sides not less than 20 inches (51 cm) from walls or other

obstacles.

• Install the unit on a ﬂat surface with a gradient no more than 10°.

• Connect the unit directly to a grounded AC power outlet. Failure to do so may cause an electric shock or ﬁre.

• This unit is designed to supply supplemental cooling for localized hot spots.

• The power supply for the unit must be rated in accordance with the unit’s nameplate.

• Do not modify the plug nor use an adapter that would eliminate the ground connection.

• Do not use an extension cord to connect the unit to an AC outlet. Use only the power cord that came with the unit.

• Comply with all applicable wiring and safety regulations, such as National Electrical Code (NEC) in the United States.

• Do not plug additional equipment into the outlet where the unit is plugged in. Overloading the outlet may cause an electric shock or ﬁre.

• Do not attempt to turn the unit on or off by connecting or disconnecting the AC plug. A serious electric shock may occur. Use the ON/OFF

button to turn the unit on or off.

• Turn the unit off and unplug it from the AC outlet before performing maintenance.

• Before connecting the unit to a dedicated drainage system, turn it off and unplug it. There is a risk of electric shock while the unit is plugged in.

• Maintenance should be performed by trained personnel only.